Your cart is empty.
Your cart is empty.Product Description
77455 Cable Bender Tool
This wire cable bender tool is working with 1/2'' ratchet, can be easily bent wires by jamming into groove of this tool. Useful in bending wires in tight spaces, makes your work simple and effective. Save your knuckles pressure, as well as your time and energy. Light enough for you to carry, takes up little space. Great wire working tool, useful for residential wiring services.
Material Details
Made of high-quality metal, durable and high hardness. Effectively prevents scratches and rusting, longer service time
Connects to 1/2'' Ratchet
- Maximum bend of 500 MCM
- Connects to standard 1/2″ ratchet
Dimension Details
Trex
September 4, 2025
This tool was critical for bending 1AWG for my sub panel. It was able to fit in a tight space with my old Square D QO panel. Works like a charm. I’m not an electrician so it became a 1 time use tool for me.
Kzoookid
August 19, 2025
Installed two 200amp service entrances for two pole barns. Saved me while pulling Three 3/0 copper wires with two back-to-back 90° LB's in 2 inch pvc. Worked great except it'll fall off ratchet easy as there isn't a retainer dimple in square drive hole. Showed my uncle (retired electrician) he wished he had one back in the day.
Benjamin J Hellmoldt
August 15, 2025
Firstly, the tool does perform to its intended task. There are some details that don’t quite meet my expectations in regards to fit. finish and even the pleasant surprise of the rubber sleeves to reduce wire insulation damage.The package came in a bubble wrap envelope that is standard AMAZON packaging. Neither great or bad, package arrived undamaaged.The finish detail looks more like cast metal with a silver anodized coating. (Not a professional analysis, simply my impression.) As listed, the pictures lead one to believe the device is more of a machined finish. It really should not affect performance, but simply leaves one feeling they didn’t get what is advertised. Heck, for the price it should be a non issue.The device fits on a 1/2 ratchet and locks in place. It surely was strong enough, and the complimentary rubber sleeves seem to help grip the wire, and protect it too. I tried this tool on a breaker bar as instructed, and tested the fitment against two high quality ratchet wrenches as well. I then tried a high quality socket on all three wrenches, the one breaker bar, and the two ratchets. In all three cases,there was more play at the connection point of the ratchet male, and the tool female joints.The complimentary rubber is a pretty cool thing to do. More than likely there was feedback about the ‘grips’ on the metal posts, and they responded in kind.Would like to see this tool with a little better finish quality, and consistent length of rubber sleeves. Would I buy it again? Absolutely, the price is unbeatable. Would rather see pictures that more correctly match the tool. I am assuming the pictures were pre production, and not intended to misrepresent the product.
David
July 7, 2025
Good quality tool. I like that it fits on a regular ratchet. Works well for bending 350mcm wires in a tight space. A good value.
DK
June 3, 2025
Concept was good but failed to meet my expectations, it was certainly better than not having it for the price it's worth having in your tool box
Sound D.
May 26, 2025
Had to horse 25 feet of 4/0 cables into place. The bender tool really helped. Cool how you can reverse the ratchet on spot as you bend the cable right or left. Still at it- converting 60 amp/70 + year - 4)15 amp fuse service into 400 amp 2)200 amp cutoffs and new 200 amp 40 space panel.Great tool= did what it was supposed to do and didn’t break.
Zabdi Murilllo
May 7, 2025
Good tool to bend wire just keep in mind the max wire it can bend
GrammyT
April 11, 2025
I used it to bend 4/0 aluminum service entry wire in a 200A ATS with a 1/2" breaker bar and a 4' long extension. If was good for my application.
S R Parr
February 28, 2025
This is excellent for larger cables in confined spaces, will help make neat bends with a good radius on!
k9a7j7
January 19, 2025
Only used it once but can't tell the difference between it and my klien in use so far. We'll see about durability I guess.
Noe Dionne
December 19, 2024
Bien
rick mclean
November 29, 2024
Tried to use it on the 500MCM wire and even with the. Plastic inserts it marked the wire to much. Seemed like a good idea at the time and maybe if the manufacturer refined the design it might work better.
jean-francois
November 14, 2024
pratique pour plier dans des petits espace mais si on ne fait pas attention il est facile d'endommager la gaine des fils. bon effects de levier je m'en sert principalement sur du 250 mcm
Recommended Products