Your cart is empty.
Your cart is empty.Product Description
Bradley
2025-08-17 20:17:27
Totally fixed my problem. Truck runs perfect. Fair price . Bolted right up with no issues
Truck stuff 828
2025-08-13 13:12:24
Looks good. Replace the iac with stock and all is good to go
Michelle McKeen
2025-08-01 12:48:00
This is a china throttle body plain and simple. If you want something that bolts on and works right out of the box buy the 400 plus dollar Holley or other name brand. That said, you need to take this apart and clean and de-burr everything, also replace the TPS sensor with an OEM one. The IAC seems ok but I’d change it too. Also loctite the screws holding the blade in, mine were loose. With a little time, this is a great part, machined nicely looks good and more importantly it works once you spend a little time going through it.
Jacob
2025-07-18 13:47:16
If you’re doing an LS swap and ever want it to get done and idle correctly, do yourself and your tuner a favor and don’t buy these 🤣 I’ve tuned a lot of LS motors and these are just going to throw you for a whirl. Right off bat low TPS voltage, and IACV O ring was just half way on. Throttle shaft machined too big so TPS doesn’t even want to come off or put a good one on. You’re honestly better off just cleaning your stock gen 3 throttle body up or setting up a GEN 4 set up if you want a bigger throttle body. I could go on and on about how junk these are.if you still want to go for it, you might as well buy a corvette regulator to REALLY ensure your swap causes you grief. Don’t buy the JEGS throttle bodies either they’re the same junk with JEGS name on them
Syrina
2025-07-17 14:07:15
Absolutely love it!
Redrobin34
2025-06-21 16:34:28
The price is a bargain for sure and it fit my tbss intake fine, but it idle fine then all of a sudden 2k rpm. If you need something quick and cheap to see if your build is working then go for it.
Devonte W.
2025-06-09 14:40:28
Solid throttle body with everything you need to install!
josh hampton
2025-04-29 11:13:18
Fit my NNBS intake perfectly. I will update when running but everything seems in order. Worked great converting from FBW to DBC.
Dan
2025-04-17 12:54:34
Tuning the idle on this had me stumped for a bit. The idle air control valve is wired for a Holley or dodge harness, not gm. Look at the diagram in my pics, rewire your harness like I showed and it’ll work fine. Use the valve that it comes with but maybe replace the o ring with your original. My idle is 700rpm
Cc
2025-03-09 15:16:55
As described
...why
2025-01-11 10:43:20
Title says it allQuick shippingMust have just received a bad one out of the bunch
Riley MacNeil
2024-12-16 14:58:31
Screeches badly at idle, IAC has this weird noise to it. Can’t get it dialed in correctly. Engine tuner recommended purchasing Holley or fitech next time
Recommended Products
$336.33
$ 99 .00 $99.00
$106.59
$ 46 .99 $46.99
$60.40
$ 27 .99 $27.99
$106.68
$ 49 .99 $49.99