Your cart is empty.
Your cart is empty.Product Description
Non-Electric Bidet (No heater inside)
Bidet Controller
- Lever UP/DOWN slowly to adjust waterflow
- Lver LEFT/RIGHT to adjust water temperature
- Knob to select the functions (Wash; Women; Nozzle Cleaning)
Bidet Installation
- Easier and Faster installation
- Save your time
Pipe Connecting
Metal T-adapter (7/8"x 1/2"x 7/8")
Metal T-adapter (3/8" x 3/8" x 8mm)
Braided Hose (1/2" x 1/4")
PU hose (1/4" x 8mm)
Front-Back Nozzles Structure (To improve the accuracy of the water sprays)
Turn Off
- The bidet is OFF.
- Nozzles inside the protective guard.
Nozzle Cleaning
- Keep hygienic
- Every family member can use. Save tons of the toilet paper!
Rear Wash/Front Nozzle
- 5-hole Nozzle for the normal rear washing
- Bidet washing leaves you more refreshed and clean.
Women/Back Nozzle
- 7-hole Nozzle for the women front cleaning
- water spray is gentler than the rear wash spray.
- Spray aims fronter, designed for ladies.
Apure Bidet A123- Only Cold Water Bidet
If you need only cold water bidet, A123 model is available with dual nozzles (Rear+Front) and nozzle cleaning.
J. Lenish
August 29, 2025
This is a great product and contraption! Once you get used to a bidet you might not want to ever go back to TPs. You will however need a bit less TP.Installation appears easy at first and may be so for those with some background in plumbing. If not, it will take a bit of courage and finesse to install. My first install ended up with some leakage and could not fix the problem initially. I wanted to call a plumber and that would have cost me about $150 extra for installing both in two bathrooms. I slept over it and thought about it and figured I could get this thing done without the help of a plumber. Only problem was leaks and difficult working space ie location of the pipes for connections. On my second attempt, I got it down to a droplet leak every five minutes or so. I almost said I could live with it. Slept over it and did it again, the following day BUT this time I used Rectorseal T Plus 2 Pipe Thread Sealant from Home Depot and pipe sealant tape (included in order). That did the trick and voila.After that, installing the second bidet was a roughly 30 minute job since the work space and location of pipe joints wasn't that easy to get to and work with. Also having the right tools really helps. The plastic stuff included in the order don't work as well if any. Can anyone install this Bidet? Yes,even without any background in plumbing. Just make sure you read and understand the instructions before you start. Make sure you know exactly where the hot water connection on both ends are located. I had connected the hot to the cold and had to redo it which took some time. Overall I learned a bit of plumbing, saved $150 in plumbing costs and now have an inexpensive bidet that can become addictive to use.Get one and install it. BTW it takes a minute before the hot water reaches the contraption, so if your toilet is far from the hot water heater you may want to run the water in the sink before you go. Alternatively get used to the cold water, and if you can; than you will not need the hot and cold water version. If the hot water heater is near the bathroom you may just need to plug the hot water and leave the cold out. Once you install it, play with it until you learn the best way to enjoy the device. In hot areas of the country, there is no need for the hot water version. Thus for less than 30 bucks you could save tons on toilet paper. Enjoy the bidet!
Ashley
August 17, 2025
I love this product ! I bought this one when I moved in to this house had one before so I wanted one again . There was things I didnt like about the last one so I read all the information before selecting this one . This one was a little bit more difficult to install I couldnt do it myself ! So , my dad and husband took on the project it didnt take them to long before they had it up and running ! I love the fact it you can control the temperature and the presure ! It had a womens and a booty button ! Super easy to use ! Its pretty quiet ! The only thing I dont like about it may take a little bit of time to warm up so I turn it on light so it can be warm on the bottom ! For the price point I do recommend this one !!!
Sarah
July 14, 2025
Not as strong as the luxe bidet. But it's pretty darn close. It came with bumpers and easy instructions
M Carrie
June 29, 2025
We barely installed this 2 days ago.It did not take 15 minutes to install, it was more like 45 minutes-1 hour. My hubby isn’t a plumber but was able to install this without major problems.Our bathroom is small so we didn’t have any problems connecting the hot water from under the sink.I agree with others, the hot water you get depends on your sink; if it takes a while to warm up, so will the bidets water. What’s a little perplexing is that it does not use any electricity. So how the nozzle comes in and out is puzzling but we’ll see how long this affordable bidet lasts.So far, it functions just fine and I’m very very happy.
Chess Heart
June 24, 2025
until everyone began hording toilet paper because of COVID-19 in early 2020, I never would've thought of using a product like this. Of course, now that it's installed, I can't imagine going back to the "old ways"!!I don't have any previous experience with this kind of product, but I can definitely recommend this model because it self-cleans, you can adjust the pressure and especially because you can ADJUST THE TEMPERATURE. The fact that it also self cleans and has two sprays makes it even better.Installation was easy, and simple. The directions were exact and easy to read and follow. All parts are high quality and I like that product is shipped with protective caps over the threads of the connectors to protect from damage and also from losing parts. The hot water line is more than long enough so you can trim it to length, and all parts appear to be made from high grade materials. The joints all fit perfectly and with a bit of plumbing tape (included with the kit) there were no leaks or drips.You can't really put a price on comfort, but in savings of TP alone this will no doubt pay for itself in just a few months. Highly recommended!!
B. Moss
May 31, 2025
After years of using cleansing wipes I moved to an older house that just would not tolerate them for the plumbing/septic. So I started looking seriously into a bidet seat. This ended up being exactly what I was looking for! It was very easy to install, even for someone with little handywork experience. It does have to be hooked to your hot water line. If you have a traditional hot water heater, you also have to prime the hot water a little by running the sink for a minute, much as you would if you are washing your hands or running the shower. I initially had a little bit of a leak, but realized it had to be something not tightened enough. I checked everything over and tightened it all down again, and it works great. Plenty of range for water temp and strength of flow. I did buy seat bumpers because the shape and height of the toilet seat shifted all the weight to where the hinges were taking the strain. They were about $10 at Lowes and it sits correctly now with no strain on the seat. After consulting a Japanese friend, I put a basket of plain baby wash clothes (chosen for softness and size) on the back of the toilet for drying and it's been a wonderful set-up so far. I have decreased my use of toilet paper by quite a lot, and more importantly I don't use wet wipes to feel clean and fresh anymore.
FTB
May 9, 2025
Couldn't test, because I got only one 1/2" x 1/4" flexi pipe.Where can I buy one more?The 1/4" is not standard for flexi pipes.
Mallek Abdallah
April 22, 2025
Great product, it does a good job cleaning with great water pressure.
Cat Lady
March 18, 2025
Easy to install. Works great. Reduced the use of TP vastly. Would definitely recommend this unit.
Bach
January 26, 2025
I have also the Toto bidet which cost 3 times more. I wanted hot and cold water because here in Canada, in winter, cold water is arround 40-42F. What annoy me most with this product is the protective nozzle hub (and the nozzle) which take too much space and go behong the bidet seat rear opening which is very annoying. A design with the nozzle and hub at angle would resolve the issue.
Recommended Products