Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools P0(+) to P7(+) Plus Pin Gage Sets
Accusize P0(+) to P7(+) Plus Pin Gage Sets
- Class ZZ
- Each gage is electro-etched with its actual size.
- Tolerance for plus set tolerance: +0.0002" / -0.0000“
- All gages are 2" long, centerless lapped.
- Hardness: Each Accusize pin gage is heat-treated to a hardness of 60-62 Rockwell C drill rod, providing the pin gages with higher durability and quality.
- Finish: each gage has a 10 micro finish or better.
- In a strong case.
Briefly introducing pin gage
Pin gages, also known as plug gages, manufactured with a specific size and durable materials, are used to test hole sizes, especially small holes, and to verify the diameter of holes and slots. They are used to quickly determine whether hole sizes are within a certain tolerance or not. Moreover, they’re used as test bars for geometric deviation measurement.
They're commonly used in combination with go/no-go pin gage handles to produce a "Go-No Go" gage that quickly qualifies a bored hole. Pins are especially useful for gaging the straightness of a relatively deep bore. The Accusize go/no-go pin gage handles can work with our pin gage sets to produce a “Go-No Go” gage. These handles can be purchased separately.
Features:
- Each pin gage set comes with a Certification of Performance. Class ZZ Tolerance
Measuring Small Holes with Pin Gauges
- Calipers are unreliable for measuring small holes; therefore, we need pin gages.
- Accusize pin gages range widely from 0.011" to 1.000". You can use them to measure a huge number of small holes.
Cautions when using pin gages:
- Prepare pin gage handles (Go/No Go handles).
- Clean the measurement surface with benzine or a dry cloth.
- Wear gloves to prevent body temperature from influencing the accuracy of the measurement. The temperature difference between your hands and pin gages may lead to an expansion of the pin gage.
- Remove dust and fingerprints. Then, apply anti-rust oil to save the tool life.
- Keep the pin gages in the environment with small humidity changes and temperature variations.
Calibrate Micrometers
- Pin gages are a good deal in common as calibration for micrometers and calipers.
- For example, you can use a 0.300” pin gage to verify the micrometer shooting for 0.300”.
Go/No Go Gage Handle
- You can purchase our Go/No Go pin gage handle separately, so that you can use it with our pin gages to produce Go/No gage.
- It will be ideal to check a workpiece against its allowed tolerance via go/no-go test
- Put the pin gage inside the Go/No Go pin gage handle. If it fits the Go side, it is within tolerance of the hole. If it fits the No-Go side, it is out of tolerance of the hole.
Measuring Groove
Verify the accuracy of a groove width of a work piece after processing by sliding the pin gage through the groove.
Measurement between holes
You can use pin gages to measure the distance between holes. The formula is shown in the picture.
Change of packaging
- To meet the challenges of shipping in e-commerce, we’re continuously upgrading the outer packaging of our pin gage sets, which were packed in fragile plastic cases and are then redesigned.
- Accusize pin gages are now packed in strong plastic cases and some of them are in reliable and beautiful aluminum cases.
- We keep upgrading the packaging. Some of the pin gage sets come with really solid cases and packaging. In the future, we will make it stronger and stronger.
Dave Zehner
2025-08-30 13:07:44
I tried to buy a set of pin gauges at an auction and was outbid, so was glad to find this set for less than the set I bid on. They are all wrapped in plastic wrap so I haven't checked for accuracy, but I think they will work well in my home shop. I also bought the larger set that goes up to .0250, but they won't be delivered until the end of December.
Bruce W Sims
2025-08-07 18:39:08
Gotta say, in all honesty, I had prepared myself for Much Less and wasVery happy and pleased to see the fit and finish of this relatively inexpensive option. I have purchased both products so that I might have the entire size range and the quality is there across both products! Nicely done!
Muscle Car Solutions
2025-08-06 09:09:39
All good. Good set that are accurate in their sizing.
Z
2025-07-29 17:30:14
After measuring the pins with 1/1000" dial calipers, I found that all of the pins were off by 0.001". In other words, my set went from 0.010" to 0.059", so I had to move each pin 1 slot to the left in the box to make the numbers match (and put the 0.010" pin in an empty slot at the bottom right). I assume that this was a packaging error, and not a measurement or calibration error.That said, all of the newly sorted pins but 1 were spot on according to my caliper. The 0.018 pin was closer to 0.0185 (about 0.0184). For the price, I was expecting a lot more variation.
Michael C.
2025-07-10 10:14:08
This is a very nice set, I would buy it again. I like the smaller than average box because it takes up less space in my toolbox.
Joe
2025-07-08 16:32:34
Nice set of pins, evaluate your needs before buying, they offer different sets, I was thinking these were much smaller than they actually are. not the seller's fault though. I got exactly what I ordered and they are in a nice enough box too.
LvL
2025-05-18 13:48:56
Perfect for sizing rifle gas ports
gordon
2025-04-01 10:00:17
I am trying not to buy tools from china but sometimes you just have to because of the low cost and almost instant delivery.
T-Dog
2025-03-18 19:10:25
Worked perfectly in determining the exact size of Amal pilot jets on hand. It has proven that the numbers on the jets are not always accurate. Found the diameters of the pins to be spot on.
Travis 556
2025-02-17 18:30:42
Nice that it came with covers for each pin. .011 is very small. I think it is good quality for the money
Papaul
2025-01-22 12:00:58
works fine
Customer
2025-01-14 16:46:44
x
Pat_Spike
2024-12-29 11:14:06
Qualité prix super !
Recommended Products
$66.99
$ 26 .99 $26.99
$49.99
$ 22 .99 $22.99