Your cart is empty.
Your cart is empty.The fan clutch is a vital engine cooling component that provides engine cooling fan speed control in proportion to engine revolutions per minute (RPM). Engineered to exacting original equipment specifications, AISIN fan clutches quickly adjust to temperature changes to provide efficiency and control while providing optimal cooling performance - without sacrificing engine efficiency. AISIN fan clutches are always original equipment matched. AISIN is a leader in the development and production of high-quality original equipment matched components and systems for the automotive industry.
M M.
September 5, 2025
Aisin is known Worldwide for oem quality , Reliability or better . At a reasonable price, fitment always works well.
Harryfan01
June 28, 2025
Working perfectly with my 1993 Land Cruiser.
Will Dozier
June 26, 2025
Seems wrong to immediately take apart a new fan clutch to tweak it. But I adjusted the clutch to kick in earlier and changed the fluid to 15k weight (ASSOCIATED 5447 FT Silicone Diff Fluid 15,000cST,White ). Works great and because this is the famous blue shaft clutch, I'll never need another one. Just replace the fluid if it becomes weak.
sidewinder81
May 28, 2025
Replaced the original factory fan clutch in my 1997 Land Cruiser with this and huge difference in engine temps and air conditioning temperatures in 100+ degree days. No brainer replacement
ML
February 21, 2025
This is the fan clutch you need. Then you just need to get on Mud and learn how to modify it with a little heavier fluid and have it open a bit earlier and your overheating concerns should be gone (provided the rest of your cooling system is working correctly).
Sean P
January 27, 2025
Perfect fit and same as factory OEM. Aisin was the original supplier for the FZJ80 Land Cruisers. The only difference is that these come with the "TOYOTA" ground flat and an AISIN logo placed nearby.Be sure to find replacement nuts because removing the factory nuts is a pain in the butt. They are very soft and prone to rounding over. Use a six point wrench and you'll have a better experience.This is a high quality fan clutch for sure.
JMM
January 23, 2025
This is the 'Blue Hub' fan clutch. Perfect for my 1997 Land Cruiser. I used it (unmodified) for a couple of years before I noticed a decrease in performance. I live in a very hot climate (Texas) so I drained the OEM Silicone Fluid and replaced with 20K Silicone Fluid. NOW WE'RE TALKING!Much improved cooling at low speeds. Really helps not only with engine cooling, but also pulling air across the A/C condenser which results in cooler vent temps when in traffic (low speed).Great value, rebuild-able (provided your bearing is still good and you don't mess up the sealing ring taking it apart).
raul
December 27, 2024
It appears this part does not lock up properly . After running the truck at hot temperature the fan is still freewheeling and not locking up .
elieser urdaneta
December 20, 2024
Works perfectly fine
Recommended Products
