Your cart is empty.
Your cart is empty.Wheel Stud Kit; Fits Subaru WRX; M12 x 1.25"; Lug nuts sold separately
TheBoostLord
2025-08-17 18:47:27
They look great, they work great. Installed in multiple hubs, takes a beating and keeps going!
A. D. Morrill
2025-07-26 10:58:19
Even if you're not worried about mods on your Subaru, I would highly recommend replacing the OEM studs with a full set of ARPs. ESPECIALLY if you use aftermarket wheels. Subarus use a hub centric design so the lugs themselves don't carry any of the load, but I have had a few lugs snap off when some tire tech (from more than one tire place) doesn't bother to use a torque wrench. The longer ARPs are SO much stronger and allow for both higher torque values and more threads for your lug nuts to grab. I have had 4 Subarus over the years (mostly driven by my kids) and I just don't even want this to be something I need to worry about. For relatively little effort, this is such a worthwhile safety upgrade imo.
Ethan
2025-07-04 17:40:59
This is an excellent product as is with all arp fastener. BUT just a heads up, *and this is in no way a reflection on ARP or their product*, if your car has aftermarket hubs such as moog or skf, they likely will not fit the stud bore, and you will have to drill them out to a 14mm bore and add a chamfer to both sides per ARP press fit spec for wheel studs. I deal with this a lot with cars that see track use because the hubs usually have been swapped and are rarely oem.
darn1982
2025-06-09 13:26:43
VERY strong wheel studs, very long wheel studs, you will probably need to run an open ended lug nut.The best aftermarket solution for the Nissan 350z and the Infiniti G35. Install is very straight forward in the front, installing in the back requires a small 'trick' (remove the emergency drum brake, the bracket for where the cable comes in will allow you to weasel the stud in).Wish they were cheaper but they are worth the price! Stay away from oem, nismo, bolton spacers, etc.
ariel
2025-06-05 10:44:30
Installed these on my Infiniti G35, it's going on for close to two years now. My car is tuned so I get on the pedal a lot. Holding up just fine. Highly recommend these
PreciseCarnage
2025-05-15 14:16:00
Needed to install spacers for new rims. OEM studs on my 04 NSN Titn were not nearly long enough. These provided the length needed and fit as if they were made for my application. Pay attention to the measurements if using outside of intended vehicle. Have about 100 miles on them at this time. Today I torque checked them as I was doing other mods. No issues.
pems-integ-tests
2025-04-23 17:09:04
What is there to say? ARP means quality - there's a reason they're one of the most recognized high performance fasteners in the automotive industry. They were exactly what I expected and I would recommend anyone who uses their vehicle for HPDEs buy these (or you know, whatever fits your vehicle).
Chris
2025-04-05 17:43:24
thank you
Angelo
2025-03-20 17:39:19
Exactly as shown
Trevor Petrow
2025-02-21 17:22:47
as described!
kadek
2025-02-02 17:27:14
Good quality,
Recommended Products
