Your cart is empty.
Your cart is empty.2 pack, nickel silver brazing rod, 85,000 PSI tensile strength, 1680 degree to 1750 degree working temperature, flux coated, used to join carbon & alloy steels, such as stainless steel, will also join most unlike metals such as nickel & brass.
John Q
August 11, 2025
You just need a hot flame to get it to work. Works well.
Kerry
May 23, 2025
Worked as advertised. Had to braze stainless steel insert into brass fitting. Worked great. Very strong. Thank you.
Jorge Gonzalez
April 28, 2025
Para soldar stainless steel
Disco
April 24, 2025
I bought these to solder some brass but the melt temp is too high. Tried on a steel joint and had great results. Smooth good looking weld with 85000 tensile strength. I'll get some soft silver solder for the brass
White Oak Meadows
April 10, 2025
Great rods. Had to repair a wear through hole on a steel hydraulic line on a 44 year old loader - pretty much zero chance of finding a replacement line and having one custom made would have been expensive. I had never brazed before but using my oxy-acetylene torch I was able to get the line red hot and the flux on the rods drew the nickel-silver right into the hole. Took longer to clean and prep everything than it did to complete the repair. Made for a nice, solid repair.
T. Geery
April 5, 2025
I guess I should have read a little closer. Not complaining about the cost but only two brazing sticks in the package. I'd have ordered another package had i realized that.
hughs
March 30, 2025
Great benzomatic quality!
JOSH MCURY
February 2, 2025
I was attempting to put 2 pieces of stainless together. I got it glowing hot the entire piece with map gas. You did nothing but clump and barely melted.
Marc d.
January 25, 2025
Good product but expensive a bit
Customer
December 17, 2024
Great for brazing small parts.
louis durocher
December 6, 2024
Ty
Recommended Products
