Your cart is empty.
Your cart is empty.019345/WB5 features: -general Purpose brazing rod for steels, copper, galvanized, or a combination of these materials. -Flux coated. -60, 000 PSI tensile strength. -4 rods per card. Material: -Copper/steel. Generic specifications: -1, 600 F working temperature. Dimensions: overall length - top to bottom: -14.5 inches. Overall width - side to side: -0.2 inches. Overall depth - front to back: -2 inches. Overall product weight: -0.18 pounds.
Sharp Dressed Man
August 9, 2025
Works as advertised but there is a learning curve to using the brazing rods
Wesley Bretting
July 21, 2025
I used this product to put back together the peacock in my backyard. It broke at one of the legs. I was worried that it would not hold up the weight of the peacock and the big rock, but it worked great and it’s still holding up and just spray-painted a little over it. Great product and easy to use. Thank you!
Rf Foley
July 6, 2025
First comment is kind of expensive for the number of rods in the package. It is as advertised but still expensive for what you get. From a use perspective, they work well. I used these braze rods to put together a custom fit stove pipe connection. I was able to use MAPP/Pro gas to get them to melt. Probably not ideal amount of heat, it pretty much just gets the job done although it is hot enough with MAPP/Pro to melt the rods. I was able to get a solid braze without any extra flux so that is a plus. Overall good braze rods, just kind of pricey but if you have a smaller job to complete , does the trick.
F. Donahue
June 29, 2025
Worked really well for the repair I needed to do. Worked with just my map gas torch
Tom
June 26, 2025
followed instructions, but even when the part is red hot, the rod just doesnt melt. I use map gas and heated for over 15 minutes.......really hard to use. Additionally, its not 1/16 inch, its 1/8 so its harder to melt. i might try crushing and flattening it before feeding it next time....I have over 3 1/2 rods to use. Only needed about a half inch of rod. Please send me the 1/16 rod!!! I am sure they will work much better.
Scott Allred
April 9, 2025
Very easy to use. I don't do cast iron very often and these rods made it simple.Thank you.
Richard
April 7, 2025
works
Dave B
April 5, 2025
Do Not Buy! The steel I hoped to braze was red hot and the rod would not melt. Useless. This is an example of why we need a zero rating option!
Brian W.
March 31, 2025
I USED THEM FOR THE INTRICATE FOLD'S,, AND CREASES OF MY EXPANSION-CHAMBER FOR MY SKI-DOO,, IT HAD RUSTED IN THE WORST SPOT'S,, BUT THANKFULLY THESE BRAZING ROD'S FLOWED NICELY INTO THE DEEP CREASES,, AND FOLD'S OF MY EXHAUST,, WITH MINIMAL CLEANING TO THE METAL,, BECAUSE OF THE HARD TO REACH PLACES.
Charlie Brown
March 17, 2025
I'm thinking more like 99% Brass is more likely. But They work very well and the flux makes for great adhesion.
peter williams
February 27, 2025
Product as described
Customer
February 17, 2025
hard to work with
P.G. Heslip
January 25, 2025
Good value.
Recommended Products
$32.47
$ 16 .99 $16.99
$23.40
$ 11 .99 $11.99