Your cart is empty.
Your cart is empty.Bosch CM10GD 10 In. Dual-Bevel Glide miter saw delivers accuracy and cutting control at all angles, as well as durable precision throughout the life of the tool. The innovative Axial-Glide System provides wider cross-cuts, enhanced alignment and smoother glide, and the compact design takes up to 10 In. less front-to-back workspace than a slide miter saw. With a 15 Amp motor providing 4,800 no-load RPM, there is plenty of power. Adjustable miter and bevel detents enable users to make precise common miter and bevel cuts, and the override allows for easy angle adjustment. The bevel lock lever and range selector are located safely upfront so users don't have to reach around behind the saw to make a bevel adjustment.
ladoorhanger
2025-08-29 18:05:58
I'm a working finish pro operating out of Los Angels since 1968. Worked with dozens of miter saws over that span of time. Including Festool and the Dewalt 780. Been using this model for about a year now. Accuracy is very good, ease of opertion is top notch and does anything I ask it to do well. I'M running it on a Ridgid portable miter stand for mobility reasons so its light weight and highly manueverable. Running an inexpensive Freud ten inch 80 tooth and geting good results. aded an aftermarket laser which i dont really use that much but it also seems to be extremely acuurate when i do rely on it. Bottom line.. top notch performer, lightweight with bells and whistles, and unmatched smoothness.
1/2 Canadian
2025-08-15 15:31:25
Love this machine. After years of dreaming of it after Tom Silva’s piece adding it to a lady’s garage setup on Ask This Old House, the price was finally right. Careful measurements and asked questions here helped my decision. It just fits the only possible workbench spot I had left. It’s arm swings in and out of the way while stored, yet when operational the back just clears the parts rack between it and the wall. A simple single bolt in one corner makes it hard to steal from an open garage, yet allows the base to swing out enough so longer pieces clear the bench vise nearby (which can also swing in). Not everything I dream up goes as imagined, but amazingly this did, due in no small part to the saw’s compactness.The saw performance so far is phenomenal. I’ll probably never use the bevel feature since I’ll likely never do molding, but it’s there if I ever do and it bevels both directions. It certainly is handier than digging out my Skilsaw and prepping boards with sawhorses, squares, and guides! Just hook the whole house Vacuflo garage hose to the dust chute, swing the arm out and set, and cut and done… it’s so much better than the Skilsaw route, and projects previously put off now get done right away. I added an Oshlun laser guide to the blade because I’m used to lasers on the Skilsaw and drill press. It may be overkill as the saw is pretty easy to use accurately on its own, but I wasn’t certain of that when ordering the saw. It is helpful lining cuts up initially, but not everyone needs a laser and it’s not that necessary if money is an issue.The included dust collector nozzle is the only really weak area. I tossed it and made my own deeper one after watching YouTube ideas. Mine barely skims the table and is wider and larger overall. It could use a little refinement to seal some gaps, but still does a wonderful job with our whole house vacuum hooked up via an adapter. Very little bench cleanup is needed compared to the first time I tried the saw with the included dust setup. Inexpensive small rubber mat supplied the rubber, and Gorilla Tape pretty much holds it together.
chuck towle
2025-08-04 17:27:08
This is a great saw and functions extremely well right out of the box. I set it on my bench after making some modifications for table height and width. Cut quality is excellent and it's a space saver because it can go flat against the wall. I made a zero clearance insert for it, very easy, lots of how to videos online. Great working saw, I am a hobbyist woodworker and have a small shop. It is installed permanently on my bench so weight isn't an issue. It is very pricey, but I spoiled myself. I justified it because it does save space, i can set it back against the wall. also hooked up dust collection but I plan on improving that also (again, a how to video online). If you have the cash, this is an excellent quality saw that makes accurate cuts out of the box.
Rivkah Abrams
2025-07-30 17:31:02
As a professional, I love this saw! It is extremely precise and versatile in the kinds of cuts it can make. I particularly enjoy the arms vs standard rods, it gives a very smooth “ride†so to speak and takes up a little less space. All the adjustments are up front which is extremely helpful.All in all; a wonderful saw. It will last a practiced user a life time with care.Would recommend
Elsa
2025-07-06 10:01:45
It is a nice saw, about the expected weight for a double compounding saw. The only thing I don't love is the saw does not have a soft start so it jumps a bit when you start the saw. Also, the trigger safety is a large slide button under the handle, depending on how you are standing it's a little tricky to operate. Otherwise the travel is smooth and confidence inspiring.
Nathan Buhler
2025-04-27 09:54:35
I spent about 6 months reading reviews and comparing miter saws before purchasing this one. Though many saws had high reviews, I am glad I went with the Bosch. I am a self-proclaimed handy-man, doing home renovations, the odd furniture build, and have spent a lot of time helping other contractors build and renovate. I am not a full-time carpenter. Wood is just a hobby for me.A few of my contractor friends have Dewalt saws, my dad has a great Makita saw, I like the Milwaukee brand, but Bosch sold me on one thing: the glide option.Pros:- The glide feature saves about 10" of space on your table. I keep this on my workbench and still have plenty of room to work around it.- I thought about getting the 12" blade, but for the price and the amount I would actually need 12" of clearance, this was an easy choice.- It is accurate. I don't have the technology or the care to us a digital protractor or calipers to test how true it is. I do know that for my precision needs (initially mitering my baseboards), it was bang on right out of the box.- It's powerful. I have used it to cut all of my laminate flooring, baseboards, 2x4s, 2x6s, softwood and hardwood, and it powers through everything.- The handle is set up for right and left-handed use. You might say "I'm right handed, and don't care". But so am I and I find myself switching hands all the time due to the orientation of the wood and my cut line. A very convenient feature.- The glide feature is amazingly smooth. Actually, the whole thing is very well built. I think this will last me a very long time.Cons:- it's heavy. I don't really care, but if you're interested in porting it around, you might wanna stretch first.- no built-in laser guide. It would be a convenience, but not a necessity. I see you can purchase one as an add on. I'm considering the purchase.- No smooth-start. Makita has a smooth-start feature that starts the motor a bit slower so there's not so much of a jolt on the equipment. I'm not sure if the smooth-start uses less power, but it sure is cool and seems like it saves some wear-and-tear on the machine (this statement is lacking in scientific evidence, I know).Not a con, but after a few weeks, I bought a Diablo 60 tooth blade from Home Depot for when I'm working with finer material. It comes with a 36-tooth blade that is great for 2x4s and big cuts, but doesn't do plywood or hardwoods so well. The Diablo was a great purchase and highly recommended to upgrade your blade if you do a lot of finer woodworking.I bought this saw at the beginning of 2016 to help with our fixer-upper house. It has been one of my most used and most loved power tools so far.
Heriberto H.
2025-04-21 11:43:12
Soy un aficionado a la carpinterÃa y necesitaba comprar una ingleteadora que me dejara los cortes en cualquier ángulo perfectos, buscando durante semanas y comparando marcas me decidà por Bosch, el equipo me tardo algunas semanas en llegar, pero al fin llego, el producto llego bien di daño bien por esa parte.El armado del equipo no es complicado ya que solo hay que instalar un par de cosas que no son nada complicadas.Funcionamiento, el equipo es silencioso a comparación de la otra sierra inglete que tengo, es pesado el equipo por lo cual hay que tener mucho cuidado, el sistema telescópico es excelente un dias para Bosch por este sistema muy funcional, las pruebas que realice de 90 y 45 grados fueron perfectos y no tuve que ajustar la máquina, la calidad del producto fue de 10 aunque el precio es alto vale la pena la inversión.Recomiendo el producto y la marca, ya que toda la herramienta que tengo de Bosch que bastante es de excelente por eso recomiendo la marca.
big mike
2025-04-16 15:17:56
smoothest saw you can buy use this for cabinet making best you can buy
Cliente de
2025-02-20 13:53:58
Excelente, llego 4 dias antes de lo anunciado y llego en perfecto estado, todas las calibraciones de fabrica perfectas, no tuve que ajustar nada. totalmente recomendable y las primeras impreciones del producto se siente la calidad cero piezas flojas o fuera de lugar, todo perfecto y en orden, vale lo que cuesta, ahora solo esperar que en el tiempo permanezca y se desempelle como debe.
Customer
2025-01-27 19:38:34
A bit of learning . But now easy and acurate.
Recommended Products
