Your cart is empty.
Your cart is empty.
Description:
- A cam follower, also known as a track follower, is a specialized type of roller or needle bearing designed to follow cam lobe profiles.
- The thick-walled outer ring enables high radial loads while reducing distortion and bending stresses.
- The stud-type follower was replaced using a standard bearing and bolt. They are easier to use and could also handle higher loads.
- Cam followers bearings have high rigidity and accuracy as follower bearings for the cam mechanism and straight line movement, and they are used in a broad range of fields such as machine tools, industrial robots, and electronic parts machinery.
- Cam followers are used as a guide roller for cam mechanisms or linear motion.
Specification：
- Model: CF8/(KR19)
- Outside Diameter: 19mm
- Screw Thread Size: M8x1.25mm
- Overall Length: 32.2mm
- Bearing Thickness: 12.2mm
- Dynamic Load Rating (Cr): 0.3KN
- Static Load Rating (Cor): 0.21KN
- Limited Speed: 20000 rpm
- Bearing Material: GCr15 Steel
- Cage Material: Mild Steel
Package Content:
- 4Pcs x CF8 Cam Follower Needle Roller Bearing
Smoker
September 3, 2025
Worked perfect for my project.
Network00
June 23, 2025
I used these followers to follow the track of my chair life. My old wheel bearings wore out after 105500 thrips either up or down the stairs in on year. We will see how these do.
Mario S Roman
May 31, 2025
Good bearings and precisely made.
Charliewoggins
February 2, 2025
The cam followers were described as being made of stainless steel. However, as you can see from the photo, they are not. All four rollers have rusted although the runners are brass.Absolute rubbish!
Wayne Dale
January 9, 2025
I ordered 4 complete pieces for a special job in the shop.Received 3 complete and 1 nut missing.Useless must have four!Really annoying to stop work because of no quality control.
Recommended Products
