Your cart is empty.
Your cart is empty. High quality aftermarket Part
TRX250TE TRX250TM ATV carburetor for Honda recon 250 carburetor trx250te carb TRX250TE carburetor TRX250TM carburetor Honda TRX 250 TRX250 RECON 1997-2001 CARB
Fitment:
1997 Honda Recon TRX250
1998 Honda Recon TRX250
1999 Honda Recon TRX250
2000 Honda Recon TRX250
2001 Honda Recon TRX250
2002 Honda TRX250TE
2003 Honda TRX250TE
2004 Honda TRX250TE
2005 Honda TRX250TE
2006 Honda TRX250TE
2007 HondaTRX250TE
2002 Honda TRX250TM
2003 Honda TRX250TM
2004 Honda TRX250TM
2005 Honda TRX250TM
2006 Honda TRX250TM
2007 Honda TRX250TM .
Specs:
Air filter mount: 38mm
Bolt bole spacing: 49mm
Intake inner diameter: 27mm
Have any questions within a month, you can always contact us, we will solve the problem for you
Note:
We guarantee 30 days after-sales service, if you receive any questions in the product you can contact our buyers, we will solve for you in time.
Note:
If the throttle line is not suitable,Please contact us
We have a matching throttle line for you Or return it for you charge
Jon Napper
2025-08-30 12:05:29
I put this on a 2002 Honda Recon 250. I didn't have to make any adjustments. It runs excellent and even idled perfectly. I used my old slide as I was just going to see if the carb was any good, I ended up leaving it in so I didn't have to switch the throttle cable.Only issue I had is the fuel inlet on the carb is 5/16 and the fuel line is about 3/16. I just used one of those small engine fuel filters that accommodates different size lines. The ones you can trim off the smaller sections if you don't need them. I then used a piece of 5/16 fuel line from the filter to the carb. Had to reroute the line a bit so the line didn't get kinked. Very easy install. I am 100% satisfied.I have a Zoom Zoom brand on a different atv. Although it does run, it doesn't run very well. So I was a bit worried about trying another aftermarket carb. When it arrived, I took off the float bowl just to see, and was surprised to see the quality of the parts inside the carb. Fit and finish were excellent. Machining looked excellent as well.This particular carb worked perfect for me. I am 100 % satisfied. Especially for $25 for the entire carb.
Mark
2025-08-12 15:10:15
First, let me say that I am not a mechanic (although I impersonate one under a shade tree). I have replaced vehicle breaks and starters and so on but never played much with a carb. I am not against taking things apart and sometimes I even have parts left over :-)I ordered this carb because my 2012 Honda TRX250TE FourTrax Recon ES was running rough and I had some foreign material in it. I cleaned out the fuel tank and ran cleaner through, but it still had low speed idle issues. I guess I could have ordered a rebuild kit, however I have never done that before and the cost of this was not much more. This way I might have spare parts.I had watched a couple of Youtube videos and felt pretty confident as long as I noted which hose went where.I had a slight problem getting the hose attached to the side (I guess it is an air line) and the gas filter supplied was not the right size. Still a great deal.I had read some people having a leak and was fully prepared just in case, but no leak appeared. I was amazed that the ATV started right up and I have not made any adjustments at all and it just worked first time. I will admit to reusing the existing throttle by just unscrewing it from the old carb and screwing in on this one. I figured if it didn't work I could go with the new part. However I didn't need to do that.
ian
2025-07-01 16:42:30
Worked well on my early 2000’s 250. Had to flare some fuel hose out to fit the fuel inlet, and Dremel just a bit of meat off the plastic intake due to the positioning of a vacuum line, no big deal. Just a flick of throttle and she’s on though, After it’s warmed up it will idle all day. No leaks so far either.But for the price I have zero complaints.
Paul D Cadden
2025-06-25 16:57:24
The bike was running in 5 minutes. Perfect fit!Hardest part was the short fuel line from the tank, which I should have replaced while I was in there.
Billy Chaves
2025-06-20 13:53:54
Worked great.
Laura Lenci
2025-06-16 17:18:22
Arrived quickly. Verified fuel line and breather tube routing, had to switch and route a tube differently that was shipped (not a big deal). Relatively easy install. Fired right up and didn't have to fine tune it. First time had a carb work right out of the box. If you don't want to pay dealership prices, this is great. Got me back up and running and back to ranch chores. No leaks and runs beautifully. Beats fighting a rebuild and cleaning.
TM6
2025-05-14 18:41:13
I bought this carburetor after trying two different rebuild kits and neither cured the dripping float valve.To replace the carb, I pulled three plastic pins from the rear of the left side panel. I removed the snorkel and two pins on the air cleaner box. I used long nose pliers to enlarge the end on Honda’s fuel line. I did this first while I removed the original carb. The fuel line was sufficiently stretched where it slid onto the new carb with no need for a clamp.The machine started without choking and now runs great. I have cautioned my grandkids to shut off the gas and run the engine dry before storing. I am happy with this purchase.
Doug D.
2025-04-28 19:02:05
it fit and no shipping damage
Paula
2025-04-26 17:26:18
The carburetor fitted perfectly and working very well.Happy customer
TFG
2025-03-04 17:46:16
Replica makuni which worked on install but comes with a few issues . Replaced the original on a 2000 trx250 . Carbs are visuallt identical looking other than a few things. The two fuel lines were attached to spigots wrong and needed to be reversed. Refer to your original carb when swapping to ensure they properly routed the attached fuel lines NOTE* another buyer has also noted the same issue.The other issue is the secondary fuel line spigot is shorter than the stock carb. Refer to yellow circle on attached picture. There is no rib and spigot being shorter, it is very difficult to securely attach the fuel line with the lock wire. I see it as a definite flaw and It is a downfall to purchasing this carb that the spigot is too short.The included slide seemed ok but there is a snap clip inside holding the needle in place that popped easliy out and seemed a bit sketchy as it relies on the slide spring to hold it in place. Fortunately the original makuni slide fit perfect in this carb and the orginal cap screwed on perfect allowing me to just unscrew and switch slide cap and cable to this carb . Atv did fire right up after a couple revolutions of the starter. Purrs like a farking kittin. I Scored this off warehouse for 30 bucks. I Will rebuild the original makuni and swap back when ready tho. Hope this helps sum dudes out there
Alan
2025-01-13 12:08:40
I wrote a complaint to the company and no response. The throttle cable threaded cap that goes on top of the carb is way too big and it did not come with a cable.
Tyler Nugent
2025-01-12 12:48:01
The factory throttle cable doesn't fit it and there's cheaper carbs that come with a cable, fool me once
Recommended Products
