Your cart is empty.
Your cart is empty. If your heater would not stay lit after you release the knob?
If it is too expensive to change a new patio gas heater just because of the broken thermocouple or dump switch?
Coolrunner Thermocouple & FD4 Dump Switch replacement parts will be your best choice that fits most gas patio heaters
Warning tips:
1. Please check if the dimension of our thermocouple and dump switch is consistent with your original equipment before purchasing
2. Make sure the thermocouple is well connected with the dump switch or valve
3. If you release the knob, the gas valve shut off again. Please check If your thermocouple is always heated on flame. Turn on the gas and push your valve 5-10s until the thermocouple probe is heated
4. Keep the thermocouple probe about 5mm from the burner hole
Specifications:
Total Length: 350 mm
Thermocouple Probe: M6*0.75
End thermocouple Nut: M8 * 1
Flat terminal: 4.8 mm/ 0.19 ''
Package Included:
1 x Thermocouple Sensor
1 x FD4 Dump Switch
Leo Gray
August 12, 2025
Easy to install
Laura
July 22, 2025
Worked as intended. No issues
brian young
July 4, 2025
Great kit easy to install fixed my upright heater
Mike
June 17, 2025
So the manufacturer is kaput, can't find parts anywhere-- and amazon to the rescue. This part was nearly identical in every relevant manner to the original. Installed and works perfect. I did have to tweak the alignment of the bracket to get reliable first click ignition but I attribute that to age of the heater, as this product isn't the bracket- just telling you in case you're working on a stubborn heater, too.The thermocouple works great. After about 10 seconds of pilot light I can go full send with the gas.
PNW WEBFOOT
May 6, 2025
This item replaced a defective item. It fit perfectly and was easy to install. Works great. Good price fast delivery.
BK
May 2, 2025
Worked as stated,
Paula
May 1, 2025
This just wasn't long enough for our domed tabletop propane patio heater. I'm not sure the description even said that it would work for that type of item. We just took a chance, but it didn't work for us. That does not mean it won't work for what it is designed to be used for.
Dr. Gary Thomas Scott
March 5, 2025
This was an exact replacement. The tilt switch and thermocouple installed easily and the heater fired up immediately when the parts were replaced.
A. M. Smith
January 25, 2025
Looks high quality but the copper conductors are not long enough for my heater. I am hoping that there is another choice. Will have to return this.
Recommended Products
