Shopping Cart

Your cart is empty.

Your cart is empty.

Deltana MSS005 MS211 and MS212 Stainless Steel Use Letter Box Sleeve for MS0030, 11 /1/2'x 2 3/4'x 1 3/4' depth

Free shipping on orders over $29.99

$29.00

$ 13 .99 $13.99

In Stock
  • Country Of Origin: China
  • Package length: 4.0"
  • Package Width: 4.0"
  • Package Height: 4.0"


Deltana has a proven record for exceptional service and quality and is the architectural hardware manufacturer with the largest inventory selection of architectural and door hardware in America. With an array of fine finishes, finding hinges, bolts, bumpers & stops, ball catch, roller latch, door accessories and home accessories which compliment your homes decor.


rhusbands
2025-08-30 14:36:15
Our home was built in the late 1960's. The original cedar shingle siding was dated, worn and required either painting or replacement. We chose to replace it, and did so with Hardie Plank. We took the opportunity to replace all the exterior fitments on the home as-well (mailslots, door knobs, door knockers, door bell buttons, house numbers, exterior lights, etc...).The main entry of our home has a magazine style (13") mailslot in the front door and a narrower letter slot (8") in-wall mailslot. We purchased both the Deltana 8 7/8-Inch Mail Slot for the in-wall mail box and the Deltana 13 1/8-Inch Mail Slot for the front door.The Deltana Stainless Steel Letter Box Sleeve was used to 'line' the opening in our solid wood door for a cleaner finish and a minor amount of additional security. The product fit perfectly and, once the Deltana 13 1/8-Inch Mail Slot flaps were installed, the fit and finish was exactly what my wife and I were looking for.The product is designed primarily as a reinforcement and liner for for hollow steel doors, but works great on wood doors too!
Sandal Wearer
2025-08-22 11:05:28
I’ve been waiting for an issue to be fixed with my garage door and have not installed it yet. It is a flimsy piece of metal that came by itself in an Amazon plastic bag. It arrived pretty bent up but can be straightened out. I live near salt water and expect it will rust fairly quickly. No installation instructions included.
Ed Rempalski
2025-08-07 10:13:49
I have foam filled insulated sectional garage doors with our mail slot cut into the door. The doors are about a 1/4" thicker that this sleeve so some foam is still visible. It would be great if this sleeve was made in two pieces that "telescoped" together. Then you could insert it from both sides of the opening and have full metal coverage with a variety of door thickness. I do like the quality and it is much better than seeing a lot of raw foam with out a sleeve, but it could be better in my opinion.
Laura Tomovski
2025-08-04 10:31:58
This was poor quality, was bent and flimsy and no screws to install. Find a different one to buy
Chesta Owens
2025-06-25 18:17:03
It is a quarter of an inch longer than the cover, so it bowed on the bottom. Still trying to figure out a way to get the bow out.
William Clendenin
2025-06-12 18:00:49
Perfect match for the Brainerd Solid Brass Mail Slot . Fairly light gauge stainless steel but once glued into place in my insulated garage door it should work perfectly. I'm very pleased with the product.
Lisa
2025-05-09 10:49:06
Did not fit the mail slot even though I matched the insert and mail slot product numbers.
kyle a ostrander
2025-04-20 13:49:42
It is a very thin material, was all bent and disformed from shipping.Did not come with mounting screws.
rhusbands
2025-04-03 13:23:26
Our home was built in the late 1960's. The original cedar shingle siding was dated, worn and required either painting or replacement. We chose to replace it, and did so with Hardie Plank. We took the opportunity to replace all the exterior fitments on the home as-well (mailslots, door knobs, door knockers, door bell buttons, house numbers, exterior lights, etc...).The main entry of our home has a magazine style (13") mailslot in the front door and a narrower letter slot (8") in-wall mailslot. We purchased both the Deltana 8 7/8-Inch Mail Slot for the in-wall mail box and the Deltana 13 1/8-Inch Mail Slot for the front door.The Deltana Stainless Steel Letter Box Sleeve was used to 'line' the opening in our solid wood door for a cleaner finish and a minor amount of additional security. The product fit perfectly and, once the Deltana 13 1/8-Inch Mail Slot flaps were installed, the fit and finish was exactly what my wife and I were looking for.The product is designed primarily as a reinforcement and liner for for hollow steel doors, but works great on wood doors too!
Sandal Wearer
2025-03-28 11:06:45
I’ve been waiting for an issue to be fixed with my garage door and have not installed it yet. It is a flimsy piece of metal that came by itself in an Amazon plastic bag. It arrived pretty bent up but can be straightened out. I live near salt water and expect it will rust fairly quickly. No installation instructions included.
Ed Rempalski
2025-02-20 10:54:00
I have foam filled insulated sectional garage doors with our mail slot cut into the door. The doors are about a 1/4" thicker that this sleeve so some foam is still visible. It would be great if this sleeve was made in two pieces that "telescoped" together. Then you could insert it from both sides of the opening and have full metal coverage with a variety of door thickness. I do like the quality and it is much better than seeing a lot of raw foam with out a sleeve, but it could be better in my opinion.
Laura Tomovski
2025-02-08 14:45:00
This was poor quality, was bent and flimsy and no screws to install. Find a different one to buy
Chesta Owens
2024-12-08 10:47:48
It is a quarter of an inch longer than the cover, so it bowed on the bottom. Still trying to figure out a way to get the bow out.
William Clendenin
2024-12-07 18:16:38
Perfect match for the Brainerd Solid Brass Mail Slot . Fairly light gauge stainless steel but once glued into place in my insulated garage door it should work perfectly. I'm very pleased with the product.
Lisa
2024-11-27 15:15:19
Did not fit the mail slot even though I matched the insert and mail slot product numbers.
kyle a ostrander
2024-11-17 11:49:18
It is a very thin material, was all bent and disformed from shipping.Did not come with mounting screws.
Recommended Products

$130.00

$ 51 .99 $51.99

4.5
Select Option

$49.99

$ 22 .99 $22.99

4.6
Select Option

$50.99

$ 25 .99 $25.99

4.7
Select Option

$123.20

$ 60 .99 $60.99

4.5
Select Option

$138.55

$ 64 .99 $64.99

4.7
Select Option

$112.80

$ 47 .99 $47.99

5.0
Select Option