Your cart is empty.
Your cart is empty.Richh
2025-09-05 10:38:07
Very useful on our sailboat, reducing needed plumbing connections between water tanks.
P. Meyer
2025-08-27 18:52:08
These are an item I have wanted for many years but no one made them so I had to make my own out of a pair of single units and tee’s. These make the plumbing much more compact and straightforward. The quality appears to be very good though that will take years to determine.The only downside is the “mounting flange†which is similar to ones on other vendors valves and which I have never figured out how you’re supposed to use.
Wizard
2025-07-12 14:59:22
This diverter valve will be used to divert fresh water between tanks on a sailboat. It takes a little pressure to move the handle which indicates to me that the seals are sufficient for the minimal system pressure that this device will be subjected too (60 PSI). I purchased stainless steal hose barb fittings so that I can just cut it into the existing water line. I note that the threads seem to be slightly off between the fittings and the diverter valve and will probably require something more than just a Teflon tape seal - probably a paste sealant over multiple wraps of Teflon. I have noticed this issue on previous purchases of foreign made threaded parts where NPT threads are not cut quite right. That said, I am quite sure that I can get an adequate seal to eliminate leakage for my low pressure application.
Keith H March
2025-07-05 18:16:43
This worked unlike another valve I had.
Galant
2025-07-02 17:24:32
I used it in my lawn sprinkler system - no problems. You will need to use a correct sealing cord.
dysfunctional vet OIF
2025-06-24 11:04:07
what this valve does, is allow a source to be directed to two different locations. i use this to run water to different areas of my drip irrigation projects.it is a quality valve, and i anticipate it will out last me.
Zoe
2025-05-21 18:31:52
feel not secured.
rhi
2025-05-14 18:34:25
Valve schematic shown on Amazon website is accurate and depicts the 4 positions for the valve handle. The valve can be operated either as a bypass valve or a selection valve with the center tap being common to either of the two legs. Valve material is slightly magnetic and carries the designation CF8M and 1000WOG. CF8M is the material designation for cast 304SS with small additions (2-3%) of Moly to improve corrosion resistance to chloride containing fluids ie seawater. 1000WOG indicates a valve which can be used for Water Oil or Gas not to exceed 1000psi. If there is any negative, it is that the three bosses provided parallel to the valve handle need to be drilled and tapped to panel mount the valve. Great price for the quality
ORH
2025-05-10 12:08:36
Excelente producto para derivar servicio de agua, tres conexiones en tipo T
jimmy lachance
2025-04-21 15:49:15
Good
Marco Acco
2025-03-13 11:19:16
Termo tanque solar y de gas Muy funcional para conectar
Mayne Mike
2025-03-03 12:04:28
great quality and price for such a useful piece of equipment
Terry
2025-01-21 16:25:21
Ease of use with direction arrows.
Recommended Products