Your cart is empty.
Your cart is empty.Product Description
Great replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, undergo strict quality control not just before shipping but throughout the production process.
Frequent Shopper
2025-09-03 11:12:57
I have used 2 of these on my 08 Silverado crew cab. The aftermarket at retail parts stores are $150-$220. Had 1 of the expensive ones go out after 1 month. Had these for over a year and no problems yet. Looks, feels and connects like OEM.
David Hall
2025-08-30 12:05:22
On my wife’s 2008 Silverado she locked it one night and the next morning the alarm was going off. This happened several times in the next two hours and there was no horn chirp when you locked the truck with the fob. The interior light also quit working when you opened the door and when locked there was a car and lock icon showing on the instrument panel. When cranked and put in reverse the driver door open message appeared. This item fixed all the issues. It’s a little tricky to install but there are several YouTube videos and I recommend watching several before attempting this repair. One video and the only one that gave this tip was to remove the bottom bolt of the window regulator and bump the regulator back to give you room to work was really helpful.
Paco
2025-08-27 18:22:44
It worked great for 4 months. All of the sudden today it stoped working. I have a door open notification and my lights stay on while driving. My alarm randomly goes off while parked as well. I’d recommend paying a little more for a quality replacement.
Chris
2025-07-30 18:47:54
I am generally against buying knockoff parts like this. But considering I couldn't source the factory GM unit for less than $200 at the time, I figured it was fiscally-irresponsible not to give this a try. If it lasts a year then it was worth the price.That said, it functions like it should and is pretty close to factory fit and form. No problems with install and worked out of the box.So far I do not regret the purchase.
Customer
2025-07-22 10:05:20
Find yourself a youtube video. If you're handy and have the right tools ready to go, it's a 30 minute process at most.I did it in about 30 minutes including having to remove the door panel twice because the first time I forgot to reconnect one of the harnesses and it fell behind the door.Tools needed:10mm socket with long extenderTorx bit (I think its a T25, fairly big)small flat screwdriverplastic pry-bar (I used a bicycle tire remover).flashlight (yes, even during the day)Door panel comes off with 3 10mm bolts hidden behind plastic covers, several plastic pop clips around the sides and bottom, and then lift it up off the door to remove. Pop out the switch panel and remove connectors, disconnect wire pull attached to door handle.The actuator is attached at 6 points: Torx bolts to door, 3 metal rods, the pull cable and the wiring harness.-Drop a flashlight into the bottom of the door so you can see better.-Take a picture of the actuator in the door so if you get lost, you can remember how everything is attached.-My suggestion after doing this is to first disconnect the rod attached to the yellow clip (hint, the clip opens by pushing the tab towards the OUTSIDE of the car).-Then unclip the rod attached to the key. Don't try to unhook it from the actuator. It is connected to a red plastic clip up at the top and can be removed by pushing the rod towards the BACK of the car.-Remove the torx bits.-Now you can move the actuator around within the door to unclip the pull cable and the wiring harness. The wiring harness is released by sliding the red plastic tab up. 2 rods will still be attached to the actuator, the key lock rod and the one going up to the lock indicator. Remove all from the door.To reinstall:-Attach the key lock rod and lock indicator rod to the new actuator-Slip the lock indicator rod up into its position in the door and attach the key lock rod back to the red clip.-Attach the wiring harness and cable pull-Bolt the actuator to the door with the torx bolts-Attach the door handle rod to the yellow clip-Reattach door panel with all wiring harnesses and the cable pull
M Regal
2025-07-04 13:23:05
The back door did not open using the FOB. GM door actuator was expensive so I thought I would try this after market brand. Took about an hour to put in since this was the first one I ever repaired. Works perfectly. Bought another for the front door. Great value.
jeff
2025-04-17 18:00:12
Fit my 2007 Silverado 1500 classic Ls perfectly
Enrique Santiago
2025-04-16 10:07:04
Installed this on my 07 Chevy 1500 along with new door cable . It’s somewhat easy to install if you have the proper tools to get the door panel out . Somewhat difficult to install , you have to remove a couple rods but there are videos. I bought a different one from a different seller and this one is better quality .Made me door sound more secure and feels like a new part when opening the door .
Bob B
2025-03-27 17:58:08
The part was lost on delivery but mysteriously delivered 24hrs later. Perfect fit for my use.
Customer
2025-03-21 10:12:01
Worked great about 1/2 hour install, cheaper than dealers price , look on you tube for directions
Harold Ramstad
2025-03-20 14:31:38
Simple replacement part. Works fine.
Oscar Villanueva
2025-02-24 12:55:23
El producto se ve de buena calidad y quedó perfecto, el único detalle es el conector era diferente al original aún y cuando decÃa que era compatible, afortunadamente pude arreglarlo para conectarlo.
Jacques Jodoin
2024-12-23 14:33:29
Reste barré. J'ai eu beaucoup de problème à ouvrir la porte qui était resté barré.
Recommended Products