Shopping Cart

Your cart is empty.

Your cart is empty.

Dorman CS650006 Clutch Slave Cylinder Compatible with Select Ford / Mazda Models

5.0 (13) Write Review
Free shipping on orders over $29.99

$40.00

$ 17 .99 $17.99

In Stock
  • Direct replacement - this clutch slave cylinder is built to match the original clutch slave in specific vehicles
  • Precise design - reverse-engineered from original equipment to fit seamlessly and function reliably
  • Durable materials - includes high-grade rubber components for compatibility with standard brake fluid
  • Trustworthy value - backed by team of engineers and quality control experts in the United States
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool


Clutch slave cylinder leaking or malfunctioning? This direct replacement is precision-engineered to match the original equipment design in specific vehicle years, makes and models for a reliable replacement. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Ford Aerostar: 1993, 1994, 1995, 1996, 1997] - [Ford Bronco: 1993, 1994, 1995, 1996] - [Ford Explorer Sport Trac: 2001, 2002, 2003, 2004, 2005] - [Ford Explorer Sport: 2001, 2002, 2003] - [Ford Explorer: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003] - [Ford F-150 Heritage: 2004] - [Ford F-150: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009] - [Ford F150: 1994] - [Ford F-250: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000] - [Ford F-350: 1993, 1994, 1995, 1996, 1997] - [Ford Lobo: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009] - [Ford Ranger: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011] - [Mazda B2300: 1994, 1995, 1996, 1997, 2001, 2002, 2003, 2004] - [Mazda B2500: 1998, 1999, 2000, 2001] - [Mazda B3000: 1994, 1995, 1996, 1997, 2000, 2001, 2002, 2003, 2004] - [Mazda B4000: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004] - [Mazda Navajo: 1992, 1993, 1994]


Michael Sandusky
2025-08-13 10:09:17
Fit my ford ranger . Haven't had a chance to do much driving yet but this with ac delco clutch kit worked just fine. A lot tighter than original clutch and not del adjusting but works great so far.
Brandon H
2025-06-01 20:07:45
Works as expected, and installation of this part specifically is very simple. (The whole job is not for an amateur) We have not put a lot of miles on it yet, but so far its operation has been smooth. I will update if anything changes, though I expect nothing to occur.
Alex
2025-05-22 11:37:46
The slave cylinder fitting is a little different than oem and was a little difficult for me to install but since i got it together I've had no problems
Customer
2025-04-30 18:32:46
fit and is working perfectly in my 1996 F150
Bob Threadgill
2025-03-19 16:32:40
So far so good. Keeping my fingers crossed that it does not fail.
Tom V.
2025-02-09 12:49:54
Just waiting for college students to demand that slave cylinders be renamed... They can take this one from my cold dead clutch foot. It does the job and wasn't difficult to bleed.
Barbara Kell
2025-01-27 13:37:14
DO YOURSELF A HUGE FAVOR AND DO NOT BUY THIS ON AMAZON. GO TO YOUR LOCAL PARTS STORE. IT DOES NOT FIT THE SLAVE CYLINDER ASSEMBLY LINE PLUG ON FORD RANGERS THAT IT IS BEING SOLD FOR. ALTHOUGHT THIS DORMAN CS650006 CLUTCH SLAVE CYLINDER IS A LITTLE CHEAPER HERE ON THIS LISTING, IT WILL COST YOU ANOTHER $80 TO BUY THE ASSEMBLY TO FIT IT. SO THAT IS NOT SAVING YOU ANYTHING. IF LIKE ME AND INSTALLED BEFORE CHECKING PLUG MATES UP, YOU WILL HAVE TO DROP YOUR TRANSMISSION AGAIN JUST TO GET THIS PART OUT, TO RETURN TO AMAZON. AMAZON WILL NOT REFUND UNTIL YOU RETURN THIS PART. EVEN THOUGH SHOULD BE CONSIDERED DEFECTIVE.
Kelmart LLC
2025-01-19 10:28:19
Other reviews warned me the line might not lock in. I ran into this issue and instead of trying to modify the clip out of the new unit I simply took the clip out of the old unit and swapped it. Locked in fine. It just takes a pick and some little screwdrivers to get it out. Be patient and take your time. Make sure its pointed the right direction when you reinstall it. I gave it 4 out of 5 stars because I think Dorman needs to address this issue or at least put a note on their instructions to swap the clip out if it wont lock in.
Craig Robinson
2024-12-30 18:02:00
Perfect fit, clutch works fantastic now!
David
2024-12-18 11:14:53
Pros:Metal base, sealed construction and packaged in a sealed bag inside a box. Much better design that the other options with plastic bases.Cons:None that I can find, will be installing later this month.
Chris p
2024-12-17 18:39:11
Good product
Debbie & Curtis LeBoutillier
2024-12-15 14:29:27
Worked great , arrived on time
Pascal martin
2024-12-11 11:03:05
Fit très bien