Your cart is empty.
Your cart is empty.Draw-Tite offers the Max-Frame Class III/IV line of Round Tube Receivers, designed to complement today's trucks, vans and sport utility vehicles. These stylish trailer hitches complement your vehicle's rugged good looks and blend elegantly into its overall appearance. Their all-frame attachment and A-Coat base/black powder coat finish ensure that they will retain their attractive appearance for years to come. The Draw-Tite Max-Frame Class III/IV receiver boasts solid welded construction for maximum strength and durability. Computer Aided Design (CAD) ensures a perfect fit for your vehicle; every Max-Frame is custom built according to manufacturer and model-year specifications. The Max-Frame Class III/IV is rated at up to 8,000 pounds. Gross Trailer Weight (GTW) weight carrying (WC) and up to 12,000 pounds. Gross Trailer Weight GTW) with weight distributing (WC). Easy, bolt-on installation with no welding required. Complete hardware kit and installation instructions included. Backed by Draw-Tite's nationwide limited lifetime warranty.
Ray Brown
2025-08-04 12:51:48
Ok so I have a 2015 chevy colorado wt 4x4 that came with a bumper hitch. I needed to change ball size often for different trailers and so i decided to go with the receiver hitch to make that easier. The hitch fit good and was good quality.Tips - There are 8 big bolts and 2 small bolts holding the bumper and old hitch on. these will be rusted badly and you will need a long ratchet and a 21 millimeter socket for the 8 large bolts and the little ones are like a 12 or 13 mm. you should spray these through a hole in the frame area inside the rail to help with removal. These are in an area that is hard to access with a impact and they are extremely tight. they use some thread locker on them so hit them with a torch to free that up or it will be a tough battle. the 4 large bolts on the bottom were easy to remove with the large impact. the 2 center bolts have clips that will need to be put on the new piece. the old hitch ball has to come out before the bumper will come off.be sure to remove the wires that are attached to the bumper before removal. i used zip ties to reattach the wiring. i used a 3 foot 1" drive breaker bar to loosen these big bolts so get ready for some physical work if you tackle this yourself. Good luck
Raymond
2025-07-29 15:24:44
worked out great been using for years now
T borre
2025-07-07 13:59:11
Dont let the other reviews scare you away, thier fitment issues are due to them not installing it correctly.Short summary: product was shipped fast, absolutely zero damage on box or product. Install was a breeze I did it in 20 min by myself. Would definitely buy this asap. Down below I will give you Tips!!!Step 1: Take all 4 bolts and pre thread them in there designated spots (I took pics of the 4 I'm referring to). Run them in about halfway, they are hard to start, hence why you thread them in before you install!!!!Step 2: Take them back out lolStep 3: take the 2 rectangle washers and put them on the spring/wire they sent you to help install the bolts. Fish them through the hole and pull it through and get it in position. Then take the wire offStep 4: take the 2 smaller bolts and literally screw them into the spring part of the wire. Fish the bolt through the same holes as the washer. And pull the wire through the RECTANGLE washer and get the bolt to drop in the washer. (Way easier than it sounds)Step 5: take tow hitch and place it where it needs to go ( I layer on my back and held it up with my knees.Take the 4 bolts/washers that you already pre threaded and removed, and do 1 on one side and one on the other halfway. You'll be able to let go of the hutch once you have 2 bolts in on each side. Do the same with the remaining bolts.Step 6: tighten all 4 bolts almost all the way going from one to another on the other side!!! you want a little bit of play.Step 7: Take a small flathead screwdriver and put it between the hitch and the truck and hold the 2 smaller bolts you fished through in Step 4. Hold the bolt in place with the screwdriver and put on the nut. ( the screwdriver just holds the bolt so it won't rotate) tighten them all the way.Final step tighten everything down to spec.If you made it this far plz don't be alarmed. It sounds like a lot but is EXTREMELY easy. This kit has everything you need to install.
JOHN DOWDEN
2025-06-27 14:30:52
High quality, heavy duty, easy to mount.
JJ
2025-06-21 18:55:35
Hitch appears to be built solid with good hefty to it. Install looks to be straight forward, paint/ coating looks well done also.
Nora Angel
2025-06-18 15:48:22
It fits perfectly on my GMC Sierra 1500, 2023,
S. A. ROBBINS
2025-06-01 14:16:36
This is a nice heavy duty trailer hitch with a capacity greater than the vehicle's towing capacity. It installed with no problem. But you do have to remove the rear bumper which is no simple task.
Matt K.
2025-05-13 18:09:19
Very easy to install, only took about 15 minutes, and I didn’t even have to drop the spare tire since I had a gear wrench to fit in the tight space. If you want to use an impact to tighten the bolts in the back you will have to drop the spare tire. I also mounted a new 7-way/4-way pin plug and it fit the mounting bracket that is welded to the hitch and is solid.
Customer
2025-04-24 11:31:09
It fits my 2012 Silverado 1500, had it installed in about 5 minutes.
Coach Shaggy
2025-04-23 14:39:56
This hitch bolts in easily to the vehicle it is designed for. The installation was fairly quick and simple with the included instructions. I would recommend watching a video if you are unsure of your mechanical aptitude. The item arrived days earlier than expected and included all the necessary hardware to install it.You will need a drill, a hole saw, and basic mechanical tools to install this hitch. It can be a bit tricky to bolt in to place if you do not have a helper, but with a bit of elbow grease and a few cuss words I got the job done solo.Highly recommend if you want to save a few hundred dollars over the factory setup.
Jimmy
2025-04-08 13:18:42
Perfect fit good quality installed on 2015 Audi q7Couple years on the car
Chris Hamilton
2024-12-17 11:34:31
Overall I am happy with this trailer hitch. The only issue I had was with the way it was shipped. There was almost no protection on it for shipping and because of that, there were scratches and chips in the paint. Not a big issue as it is just all black and easy to touch-up with a spray can. The real problem with the way it was shipped was that the mounting hardware was lost in transit. They told me the hardware would be in the hitch receiver but without a box or protective wrapping, it must have fallen out on route. The seller would not supply replacement parts and only issued a $50.00 credit for the lost hardware. I ordered the replacement parts online from another supplier but they cost me over $90.00 with the shipping so that wasn't great. Once I had the hardware, it was very easy to install and everything fit properly.
Paul Massicotte
2024-12-04 11:47:34
2011 E350 XLTinstalled in under half hour with the help of my 6 year old son.Every bolt and hole lined up perfectly. Instructions are written very small and not intuitive. But was able to manage to make heads and tails of it.
Recommended Products
$21.79
$ 10 .99 $10.99