Your cart is empty.
Your cart is empty.Get clean and professional looking edging for lawns, paths, and driveways in a single afternoon with EasyFlex Snip to Flex Paver, Brick, or Landscape Edging. Featuring 10 6-foot segments of commercial grade edging, this set of garden and paver borders is a simple and reliable way to create straight and curved paths. Whether you're an experienced landscaper or a DIY weekend warrior, the Snip to Flex design makes it easy to keep your garden and pavers in place. Simply snip the spines and bend edging to form curves or leave spines as-is to create strong, straight edging. To install, place edging in desired shape, hammer stakes (sold separately) through the holes, and back-fill with dirt or ground covering - then sit back and enjoy your beautiful landscape design.
Kayla Bethea
2025-09-03 16:03:07
I like the way these look. They are easy to install and the plastic material is very sturdy. A Dremel tool can easily cut the plastic to the size you need if you need it shorter.I have some that have held up well over a year and purchased another 2 sets recently to continue around the yard, as a barrier between my turf and decorative rocks.Spikes are not included.
Beauty Addict
2025-09-02 11:49:20
I've been a Master Gardener for 10 years and do a lot of work with DIY homeowners. Having tried many types of edging, this is by far my fave. I've used this as edging for patios as well as for beds with rocks. However, with a masonry project, I'd suggest using metal stakes that are longer. Many other products have a 1.5" lip. In my opinion, you really need a 2-3 " lip to keep river rock and mulch securely in place. This product has a 2.5" lip. It is easy to walk over but I would not mow over it. There are other products made of metal that do work equally well, but they are more difficult to work with and much more expensive. With this, it is so easy to install, do not need connectors and it is super flexible. You can also make 90 degree angles. Tip: snip the portion off needed to make the turn and overlap the two holes of opposing sides. The other great thing is that since this sits on top of the ground this moves with the earth. So it stays in place in a cold climate with snow thaw. Bummed that the price has gone up but such are the times! Good luck on your project!
MTC
2025-08-29 15:24:39
The quality was excellent, and they were substantially less expensive than the ones I could find in my local (but big chain) hardware store. I am so glad I checked here first, because I saved a lot of money and did not compromise on the quality. Thank you!
Socal
2025-08-02 13:17:34
I really like this paver edging. it is stiff and tough. It is a little flexible and has a slight curve, so don't use this as your straight-edge when defining your layout. Also, not a perfect 90 degree angle, but that wasn't too difficult to overcome. I think the height was perfect for my project. The edge was about half an inch below the top of the pavers. I used 6 inch steel spikes, about 18 inches apart, to hold it in place and I believe it's there to stay and will keep the pavers in place for years to come.Did I mention these are tough? You will need a hacksaw at the least, likely a power saw, to cut them to length. I did not do any curves on this project, so I can't speak to the "Snip-to-Flex" feature, but it appears to be a sound design.
James W. Allison
2025-06-10 11:01:44
Used EasyFlex to put a border around a new paver patio - worked like a champ.I think some of the complaints I have seen about this edging were because of the fact it can flex away from the pavers when staked into place over a surface that isn't perfectly level. Filling any gaps between the edging and the pavers with sand (elastometic or otherwise) after the edging is staked in-place will prevent the pavers from shifting when you settle them with a compactor.
Coyotte:FR
2025-05-23 09:46:30
I used these snip and flex paver edging all over my back yard since 3 years now and quality is still the same EXCELLENT and very reasonable price $79.69 compared to other brands. Very easy to install. To curve them just snip the little plastic piece wherever you need to. Delivery was fast and well packed. 6ft long 10 pieces in one box well packed. As usual very happy with this product. I do recommend it.
ruiner
2025-05-12 12:50:34
The edging it very well-made. It's extremely rigid and sturdy. It even takes a bit of effort to cut it as well. It's not flimsy like other solutions. I was able to safely secure the edging with 10" steel spikes to keep my pavers in place. I am very satisfied with the solution.
Just, Tee
2025-05-08 18:15:16
Very pleased with product
Forneleh
2025-04-08 12:44:11
This edging is proper contractor type edging available when all the stores were sold out. Delivered to my door and installed for a perfectly straight edge on my new patio. I used it only on straight runs...no arcs. Easy to install. I used galvanized nails to anchor rather than the recommended plastic nails. The interlock stones have not moved and have a solid edge using this product.
P. Why
2025-03-26 17:42:37
I liked the sturdiness of this edging. It was easy to install. Remember to purchase the pegs/spikes separately as they don't come with.
Ronald Mackenzie
2025-03-23 17:20:23
This item is very sturdy and easy to install. The plastic is thick enough that a hacksaw must be used to cut it, but this is a good thing as it's job after all is to hold pavers in place. There is not interlocking of strips but they fit well end to end and nails hold them in place. A great buy.
Steve
2025-02-24 14:19:34
I thought these were a significant upgrade over the "flimsy" alternatives from the big box hardware stores. You get what you pay for. They line up dead straight. Perfect. Note, they are so sturdy that "snipping" the plastic reinforcements requires some effort if you want to curve the edging. Actually a good thing.
Kryptonope
2024-12-23 13:30:06
This is exactly as it is described. The pieces definitely have some heft, and when you've got them nailed down, they definitely don't seem as though they're going to move. I haven't tried snipping the spines to do curves, yet, but I hope they work.Three years later... These are still working and looking great. I had 5 or so in storage that I brought out, and they're just as strong. Easy to snip to accommodate curves.
Recommended Products
