Your cart is empty.
Your cart is empty.Product Description
Efield:Full Range Pex Plumbing Supplier
Efield USA Inc, Full Range Pex Plumbing Supplier ,specializing in pipes, brass fittings, ball valves,outlet boxes and manifolds etc. With 25 years of experience in production engineering, our products have been recognized by global customers and exported to many countries in the world.
Efield outlet boxes house both supply and drainage lines for various plumbing appliances, including washing machines, ice makers, toilets, and dishwashers. Separate supply and drain boxes allow for numerous installation configurations, minimizing solder joints, installation time, leakage risk, and any chance of a burned drainpipe.
Customer
2025-09-05 18:08:58
Bought it to DIY a water supply to my fridge. Works great and I haven't heard a noise from it despite having super hight pressure in my pipes.Easy enough to install but make sure read the instructions and to install one side on a stud. I also recommend placing a piece of 2x4 on the other side to to make it really sturdy.
Kevin P
2025-06-17 17:12:44
Plumber says it's good. Fast delivery, live to see the performance.
Customer
2025-05-24 19:10:09
Nice design
Greg T.
2025-05-18 17:08:53
I've had this connected to the fridge for a few weeks now and haven't had an issue with the plumbing itself. I docked one star because of the housing. There is one little screw bracket which you use to stabilize the piece on the framing. But in the act of attaching it to the stud, the bracket snapped (not the case itself). The product didn't come with hardware so I don't know if the plumber used a screw that was too big or if it was over-tightened or if the material is just too thin. I did buy a couple of different brands to see which would provide the best fit with my rough-in location so I had some level of comparison. This one was the better size so we went with it. Ultimately, they could beef up the attachment point a bit and it'd be great.
Steve
2025-03-17 09:29:56
We have used quite a few of these boxes. Work great for our applications.
ronald l.
2025-02-15 13:59:38
I have I 90 degree 1/2 inch elbow and a 3/8 John gusset fitting on it and have it roughed into my sheet rock, ready to mud that wall!
Customer
2025-01-27 14:32:19
Looks to be quality product. Very fast delivery
SMS
2025-01-17 10:34:33
I changed the layout out my Kitchen Appliances in a remodel, and relocated the Refrigerator to an adjacent wall, far from the original location.My new location however was on an interior wall where I had a Powder Room on the opposite side!You can see the process above - added a 1/2" to 3/8 90 to the bottom of the Valve, then ran a std 3/8 line up to a 3/8 Add-A-Tee to complete the process.Finally I added a 90 on the outlet, which allows the refrigerator line to run parallel to the wall, which allows it to go closer to the wall vs interfering/kinking if connected straight-on.That was simply an extra 1/4-90 compression 90 plus a small length of 1/4" Stainless Tubing.Everything was sourced right here on Amazon!
Recommended Products