Your cart is empty.
Your cart is empty.Product Description
-
Fast & Easy Installation
- No drilling or screws required
- Works on most cars and trucks
-
Handles All Conditions and Weather
- Protects from costly paint damage
- 3M adhesive with all-weather durability
-
Made in the USA
- Customizable
- Stylize your vehicle to give it a distinctive and customized look.
-
Extend your fenders by up to 2 inches
- Designed protect your paint from dirt, grime and scratches
- Transforms the look of your car or truck
-
Installation: Step 1
Peel protective film from tape starting at one end of the Fender Flares and attach to surface of vehicle.
-
Installation: Step 2
Firmly press and hold the Fender Flares for several seconds against the surface of your vehicle. Make sure there are no air bubbles or gaps.
-
Installation: Step 3
Cut excess off with scissors.
Fender Flares PRO
Compare our Flares
2 inches | Extends your fenders | 1 inch |
4/5 | Durability | 3/5 |
| | 3M adhesive | |
| | Dura-X Foam | |
| | InvisEdge | |
Dual-Edge Protection | ||
Serrated Adhesive |
2 inches | Extends your fenders | 2 inches |
4/5 | Durability | 5/5 |
| | 3M adhesive | |
| | Dura-X Foam | |
| | InvisEdge | |
Dual-Edge Protection | | |
Serrated Adhesive | |
- Fender Flares
- Fender Flares MAX
Bento
September 4, 2025
Very happy with the EZ Flares, so far it’s been a little more than 2 months since I installed it and still see no signs of it falling off. Installation was easy. I made sure the surface was clean and heated it before sticking it on. I did make some holes on the ez flares to allow access to the fender pins and so that the pins can hold it just in case. It’s seen some off-road action and plenty of rain. I live on a road with plenty of mud and rocks, It helps to prevent rocks from scratching the paint and mud from flying. I’m also happy with how professional it looks and have these installed on the front fenders of my Vehicle.
Roderick Klimek
August 24, 2025
I own a Remodeling Company and installing these is a kid's job, so I'm confident it's not the install. I even watched videos before the package came in so I had everything in line. I want to know what I'm doing when I glue something to my truck. Right on the very first one patches of it just started falling off. Like the adhesive wasn't evenly applied so I kept pressing and pressing and it just kept sagging in parts. Ripped it off shoved it in the box and started my return. Would not buy again. Would not recommend. As an owner of a remodeling company, I put up with so much trash product that I don't have the patience for it. If you have them and you like them, that's great. Maybe I got a bad batch, but I don't deliver bad product and I don't expect anyone to deliver it to me.
Demoniac
August 16, 2025
A few inspection places whined about my wheels sticking out 1.5"-2" from my fenders. But I don't want to drill, rivet or screw stuff into my fenders. That's where these awesome fender flares come in to appease the man...These look pretty decent and confused people. They look like mat black plastic material until you find out it's foam rubber.
Richard B
August 6, 2025
Installed on my wife’s Jeep Wrangler JLU after replacing stock tire and wheels. Very easy to install and was surprisingly impressed with how it looks. The material is flexible foam with just the right form to look good. Not as good as solid flares but well worth the price paid. We’ll see how long it lasts in the AZ heat. I’ll update review if there is an issue with the lifespan. All in all a solid product for the price.
Customer
July 17, 2025
I took my vehicle in for state inspection (PA.) and they told me my tires were sticking out too far beyond the fenders to pass (even though this same garage had passed the exact same tire and wheel setup at least 3 previous years). I no longer had the stock setup to throw on temporarily, so I started looking for a solution via the internet. I stumbled upon these stick-on flares and thought this might work. I got the 2" size and it was the perfect coverage for my Jeep with 35" tires. I took the vehicle back to the garage, it passed inspection, all is well. I think the flares look great, and I would probably just leave these extensions on. But the adhesive did not do well through the first car wash. There are now gaps where the flares are pulling away from the fender. I followed the installation instructions to the letter and they initially seemed to be really sticking well. There is a method for installing these by removing the plastic rivets along the edge of the fenders, then installing new plastic rivets to hold on the extensions. You can check out the You Tube video for that. That's probably the best solution. Overall I like these extensions, except you do have to buy 2 rolls to cover all 4 fenders. Just know the adhesive will begin to fail after about a month.
Manda
June 27, 2025
Finally got to install this today. Definitely easy to install, and the 3M tape is actually pretty strong. It is important to clean the surface with dish soap and rinse it with warm water. Then use alcohol wipes to clean the surface. Wait a few minutes for the surface to dry and then heat the surface (If you are doing this in a cold weather) with a heat gun or hair dryer. This thing sticks like a glue after it was installed. I did all 4 fenders on my 2018 Chevy Silverado 1500 and I; still have a little left. Yes I had to buy 2 of these to do all 4 fenders and yes they are expensive. I hope they hold up in Maine's cold winter. I will update this review next spring to let you know if they hold up.
Alfred P. Privitera
June 25, 2025
Needed wider fenders on my gator UTV. Couldn’t find flares that worked until I found these which work great. Great product easy installation.
itay
May 1, 2025
To short for any vehicle, covering only half wheels for any regular size 4/4
海賀邦夫
February 22, 2025
フェンダーã‹ã‚‰ã‚¿ã‚¤ãƒ¤ãŒåŽã¾ã‚Šã¾ã—ãŸ
matthew e.
February 21, 2025
Seemed a little over priced and now I've got to buy another kit as 1 isn't enough to do all 4 arches on a medium sized suv not happy
Maxime.R
February 7, 2025
Malgré un nettoyage minutieux et un dégraissage de l'aile, le double face colle moyennement. Et je doute que ça tienne dans le temps. Le plus gros souci pour moi est l'esthétisme, sur mon gmc suburban de 1991, les ailes sont relativement carré et dans les angles, ça ne fonctionne pas
Oil19
February 3, 2025
Good quality, stays on great!! Look good
Cliente
December 26, 2024
Articulo perfecto para poner en el paso de rueda de tu GeepSe pega perfectamente
Recommended Products