Your cart is empty.
Your cart is empty.Product Description
Tough & Durable Construction
Hooke Road wild style tubular fender flares are made of heavy duty 11-gauge(1/8 in) and 16-gauge(1/16 in) steel plate and 1.5" diameter × 0.06" thicksteel tubing. Textured black powder coat finish & Premium E-coating process inside for long-lasting durability and corrosion resistance.
Bolt-on Installation Need Drilling
All of the hardware needed to install these fender flares are included in the kit. Front fenders are designed to be a direct bolt-on install using factory holes. Drilling is required to complete rear fenders install. The installation process is considered to be simple to moderate in complexity.
Highly Recommended Items
-
Different Trail Front Bumper
For 2007-2018 Jeep Wrangler JK & Unlimited. The sharp looks and sleek approach angles built into this bumper ensure it is an excellent complement to any level Jeep build.Built in 4*18W LED lights.
-
Tubular Offroad Half Doors
For 2007-2018 Jeep Wrangler JK Unlimited 4-Door. They'll give you peace of mind when cruising with four legged friends or family by providing more security than riding without doors.
-
Windshield Frame Cover Armor
For 2007-2018 Jeep Wrangler JK & Unlimited. Added super protection around a-pillow and cowl area. Includes 4×18W LED spotlights provides excellent front visibility at night.
Jeff Brock
2025-08-30 15:55:18
These are great fender flares for a Jeep Jk. They are heavy steel and not flimsy or cheaply made. They bolt right on using the factory holes from the OEM flares. They are a good fit and look great!The only negative I have is that you have to install screw cap rivets into the body. This requires drilling the holes slightly larger then inserting the rivet cap.It’s not a difficult process but the tool they provide to seat the rivets is terrible! One turn and the ball bearings smashed and fell out. I highly recommend purchasing an inexpensive rivet tool if installing these flares! It’s well worth the investment as it takes seconds to install the rivet caps and then the fenders will bolt right on!Great product and highly recommend for a JK.
Russell Norris
2025-08-14 16:53:10
I've been looking for the right fenders for the last 2 years. Most of the fenders I found on Amazon are just a flat piece of metal. I stumbled across these right before prime days and I love them they are sturdy ,everything lined up for the install! This is the exact look I'm looking for my jeep! Highly recommended!!
KRVR
2025-08-08 10:29:13
Great construction, fair price and not too hard to install with some basic mechanical expertise and forethought. Arrived fast and as expected thanks to other reviews. Outer packaging was in good condition, fenders were decently protected but slightly bent out of shape on a couple corners. I put them in the vise and straighten them back fairly easily so no big deal; I actually made them follow the contour on the bottom edge so they fit the body perfectly. The hardware was all over the place and a few rivet anchors were missing but I had ordered extra ones already when I ordered the tool so it didn’t set me back. Tell the little sweatshop kid in shipping that little hardware box works better if you open the lock then close the lid before locking it back; the lid on the case didn’t close because the lock was on and that little piece of tape wasn’t going to hold that thing closed all the way from China. Installation was fairly simple considering the instructions are no help at all. There is minor drilling required and I recommend getting the nut sert tool but you can set the rivet anchors with a bolt, some nuts and washers; there are YouTube videos to show you how. I did half with the improvised homemade tool and half with the nut-sert because I got impatient waiting on the tool to arrive as the first one I ordered was lost in shipping (same kid probably packed that too). There was no difference except with the proper tool they set much quicker. I had no fitment issues as stated by others, rear doors clear by a mile. A little test fit before you start drilling out existing holes goes a long way as you will have to make new ones. The factory holes will fool you in to thinking they work because for the most part they line up but then you won’t be opening your rear doors and complaining and claiming they won’t work on the 4-door wrangler but surprise, they do. I have pics as proof. Overall I’m happy with them, they are a definite upgrade from the original plastic ones and have a unique look. They are made from a pretty heavy grade metal with a nice black coating. They look like they will hold up for while but time will tell. The only reason I’m skeptical is because they cost so much less than similarly constructed products but was very surprised in their construction and design. I’d buy them again but don’t think I’ll have to if these last like I think they will. If I trade or sell the jeep I’ll swap the stock ones back on and keep these for the next one probably.
THERESA MOVILLA
2025-08-01 12:35:14
these were easy to install in our driveway. Arrived quickly with no issues and husband installed in less than 2 hours . They gave my jeep a nice custom look without breaking the bank and they don't look cheap
Corey
2025-07-15 18:44:33
Very nice quality and good fitment
Sam Jefferson
2025-06-22 11:24:45
Like most said, the front fenders don’t fit flush, you have to bend them to your wheel well. The included rivet nut tool completely disengrated when installing the first nut. The nut didn’t fully seat, so I drilled it out and now I have a larger hole. I’ll probably punch a new hole in the fender 1†up or down and put another hole in the Jeep. For the price of the fender they could easily throw in a proper nut tool.Update: 3/4 fenders were manageable to install. The 4th, driver side rear, was so warped the holes did not line up with the factory. It looked close but the bolts cross threaded the rivet nuts on 4 holes. Had to completely drill out bend out 4 rivet nuts and then punch completely new holes in the fender. You can not wallow out or drill oblong the factory holes because the rivet nuts won’t seat. It would have been better off if the fender didn’t have any holes at all, or if they were completely offset from the factory keep holes.Company gave me a 10% discount after showing photos of my issue.
Kate
2025-06-17 18:18:05
Have yet to install but these are nice. They're sturdy, feel expensive, and look super cool
Aaron Manley
2025-06-02 17:00:23
Really happy with these! Easy install, just make sure you have a rivet-nut-setter & you won't have any issues. Took a few hours to install, but that's includes the removal and replacement of the original fender flares and liners. All in all, couldn't be more happy with these!
Mike B.
2025-05-19 13:04:02
I Love the style and look But the quality is so poor the metal is warped and looks like a kids from high school fabricated this. Front fenders dont contour with the lines ofthe jeep in the front of my 15 JKU and tho the rear fenders will bolt on a 4-door after buying a special tool seperatley for the Rivet nuts you can NOT open the rear doors as they do not clear the fenders cause of then angle they are built. Poor product. poor engineering skills.
Colin
2025-05-07 14:28:39
I put on a 4 door Jeep and the rear doors hit. Very awful fit and had to drill more holes to make them work.
Jeff Brock
2025-04-26 11:23:48
These are great fender flares for a Jeep Jk. They are heavy steel and not flimsy or cheaply made. They bolt right on using the factory holes from the OEM flares. They are a good fit and look great!The only negative I have is that you have to install screw cap rivets into the body. This requires drilling the holes slightly larger then inserting the rivet cap.It’s not a difficult process but the tool they provide to seat the rivets is terrible! One turn and the ball bearings smashed and fell out. I highly recommend purchasing an inexpensive rivet tool if installing these flares! It’s well worth the investment as it takes seconds to install the rivet caps and then the fenders will bolt right on!Great product and highly recommend for a JK.
Russell Norris
2025-04-21 10:54:14
I've been looking for the right fenders for the last 2 years. Most of the fenders I found on Amazon are just a flat piece of metal. I stumbled across these right before prime days and I love them they are sturdy ,everything lined up for the install! This is the exact look I'm looking for my jeep! Highly recommended!!
KRVR
2025-04-13 10:34:48
Great construction, fair price and not too hard to install with some basic mechanical expertise and forethought. Arrived fast and as expected thanks to other reviews. Outer packaging was in good condition, fenders were decently protected but slightly bent out of shape on a couple corners. I put them in the vise and straighten them back fairly easily so no big deal; I actually made them follow the contour on the bottom edge so they fit the body perfectly. The hardware was all over the place and a few rivet anchors were missing but I had ordered extra ones already when I ordered the tool so it didn’t set me back. Tell the little sweatshop kid in shipping that little hardware box works better if you open the lock then close the lid before locking it back; the lid on the case didn’t close because the lock was on and that little piece of tape wasn’t going to hold that thing closed all the way from China. Installation was fairly simple considering the instructions are no help at all. There is minor drilling required and I recommend getting the nut sert tool but you can set the rivet anchors with a bolt, some nuts and washers; there are YouTube videos to show you how. I did half with the improvised homemade tool and half with the nut-sert because I got impatient waiting on the tool to arrive as the first one I ordered was lost in shipping (same kid probably packed that too). There was no difference except with the proper tool they set much quicker. I had no fitment issues as stated by others, rear doors clear by a mile. A little test fit before you start drilling out existing holes goes a long way as you will have to make new ones. The factory holes will fool you in to thinking they work because for the most part they line up but then you won’t be opening your rear doors and complaining and claiming they won’t work on the 4-door wrangler but surprise, they do. I have pics as proof. Overall I’m happy with them, they are a definite upgrade from the original plastic ones and have a unique look. They are made from a pretty heavy grade metal with a nice black coating. They look like they will hold up for while but time will tell. The only reason I’m skeptical is because they cost so much less than similarly constructed products but was very surprised in their construction and design. I’d buy them again but don’t think I’ll have to if these last like I think they will. If I trade or sell the jeep I’ll swap the stock ones back on and keep these for the next one probably.
THERESA MOVILLA
2025-04-03 11:56:27
these were easy to install in our driveway. Arrived quickly with no issues and husband installed in less than 2 hours . They gave my jeep a nice custom look without breaking the bank and they don't look cheap
Corey
2025-03-26 16:30:12
Very nice quality and good fitment
Sam Jefferson
2025-03-22 12:26:03
Like most said, the front fenders don’t fit flush, you have to bend them to your wheel well. The included rivet nut tool completely disengrated when installing the first nut. The nut didn’t fully seat, so I drilled it out and now I have a larger hole. I’ll probably punch a new hole in the fender 1†up or down and put another hole in the Jeep. For the price of the fender they could easily throw in a proper nut tool.Update: 3/4 fenders were manageable to install. The 4th, driver side rear, was so warped the holes did not line up with the factory. It looked close but the bolts cross threaded the rivet nuts on 4 holes. Had to completely drill out bend out 4 rivet nuts and then punch completely new holes in the fender. You can not wallow out or drill oblong the factory holes because the rivet nuts won’t seat. It would have been better off if the fender didn’t have any holes at all, or if they were completely offset from the factory keep holes.Company gave me a 10% discount after showing photos of my issue.
Kate
2025-03-15 12:46:03
Have yet to install but these are nice. They're sturdy, feel expensive, and look super cool
Aaron Manley
2025-03-04 09:39:46
Really happy with these! Easy install, just make sure you have a rivet-nut-setter & you won't have any issues. Took a few hours to install, but that's includes the removal and replacement of the original fender flares and liners. All in all, couldn't be more happy with these!
Mike B.
2025-02-07 18:41:35
I Love the style and look But the quality is so poor the metal is warped and looks like a kids from high school fabricated this. Front fenders dont contour with the lines ofthe jeep in the front of my 15 JKU and tho the rear fenders will bolt on a 4-door after buying a special tool seperatley for the Rivet nuts you can NOT open the rear doors as they do not clear the fenders cause of then angle they are built. Poor product. poor engineering skills.
Colin
2025-02-02 11:50:26
I put on a 4 door Jeep and the rear doors hit. Very awful fit and had to drill more holes to make them work.
Recommended Products
$39.99
$ 18 .99 $18.99