Your cart is empty.
Your cart is empty.Product Description
Specification
- Size: 0.93"x0.93"x1.1"
- Material:Crystal clear acrylic
- Easy to Carry
- Novelty design
- Package Included: 1*3 axis bubble spirit level
WIDELY COMPATIBILITIES
3 axis spirit bubble level for Canon, Pentax, Olympus, etc. SLR/DSLR cameras (Fits most SLR/DSLR flash mounts/hot shoes (Minolta & Sony & NikonD5200, D500, D5100 ,D90, D7200, D3300,D300, D3200, D7100, D600, D7000 excluded!)
Must Have for Photography
Idea for landscape and architectural photography, the level allows positioning of horizontal and vertical axis simultaneously, at the same time greater for panoramic photography and stitching photo.
This level is very useful for getting better results with multiple frame panoramic images, or for ensuring a level horizon on single frame shot.
The spirit level mounts effortlessly right into camera's hot shoe and it can be easily placed on a flat portion of the camera, which corresponds to the lens axis.
Bay Kayaker
2025-09-04 10:22:16
This is a cool little inexpensive gadget that I use to set up my camera for night-time photos when the horizon is not visible. It has three axis, but normally I only use two, depending on whether I'm shooting portrait or landscape mode. So far I've had not problems with the device. I seems sturdy, although I guess you could break the hot-shoe if you dropped your camera. I try not to do that. ...anyway, it's worth the money and I can recommend it.
Norm
2025-08-15 16:02:05
What a great accessory. Works perfectly
Catskinner
2025-07-18 16:55:27
It's an inexpensive little gadget that is great for making quick checks and see if the camera is more or less level. The base is a bit loose in the shoe so the fit is fiddly, but it still beats leveling the camera using the old mark 1 eyeball.
Ric Donato
2025-07-11 14:32:47
My reason for one star is the molding of the base. In the attached image of the base it slides on the camera left to right. Notice the right side of the base wing is thinner than the left and the center is thicker than both making it impossible to fully seat on the camera accessory shoe (hot shoe). See the attached images of it in the camera shoe. Though I already I have a dual axis level that slides on and off all my cameras I wanted a three axis spirit level. The best I might be able to do is sand the bottom making it fit, but then I must be extremely careful making sure it is indeed level.EDITED 2017-11-01Over the past few days this vendor contacted me about my review. Their concern was my dissatisfaction, their goal is to make it all good. In all correspondence they have been exceedingly helpful, cordial, and to make things right they have gone out of their way.Though the product had manufacturing flaws out of their control their customer service is above reproach. The important thing in any transaction is how well does a seller handle issues; their attention to their customers is above and beyond what would be expected. Would I again purchase from them, yes.The reason for five stars is their customer service. They have contacted their manufacture about the manufacture's poor molding. With molding issue resolved this should be an outstanding product. Again, it is important the manner problems are addressed, and FOTYRIG seems very sincere about correcting issues brought to their attention.Edited 2017-11-06Today I received a replacement three axis bubble level. This replacement perfectly fits 100% of my cameras. My cameras are old film cameras, Pentax K1000, K1000 SE, and K2, Minolta XG 7, Canonet G-III QL17, and Leica IIIf. Folks I have shot for request film not digital.FOTYRIG I am commending you for your customer service, followup and follow through. Very much impressed with your company; well deserving five stars. From me a heartfelt thank you.NOTE: Because the base molding anomaly is resolved I removed the original three images.
Alex Utah
2025-07-03 17:28:41
I feel like I'm taking crazy pills! After I received the level (about 2 months ago) I slid it into the camera's hot shoe adapter, and to my utter disappointment, it was so loose you could actually jiggle it around. If the camera tilted backward at all it would just slide out. I figured I could fix it with some sort of shim, but I took it out and quickly forgot about it.Fast forward to 10 minutes ago, and I noticed it sitting on my desk. I figured it was a good time to tackle the looseness issue, so I slid it in again to see exactly how thick my shim would have to be, and it fit PERFECTLY! Tight enough to keep it perfectly in place, but not so tight it's difficult to slide in and out.The only thing I can think of is that the natural humidity in the air (and I live in a desert climate, so we're not talking about much) absorbed into the plastic over the past few weeks and it swelled up a tiny bit. If you receive yours and it feels loose, just give it some time out of the packaging and try again a few days later. I'm so glad I didn't return it or throw it away! Now that it fits, I love it. The 3 separate bubbles allow you to align your camera perfectly on every axis, and the clear plastic is perfectly see-through. I highly recommend it!
Joe
2025-06-24 10:40:06
This product fails at its primary function, which is to show when the camera is level. It was off by a few degrees, which for me was enough to make it unusable. Rather than throw it in the trash, I fixed it by using a flame to soften one side of the plastic base enough to correct the alignment. It was not hard to fix, but unless you are willing to do this, don't buy it.
RavenManiac
2025-06-12 17:22:42
This is a very well-made and helpful item. I originally purchased it for a Camvate cold shoe mount. Although it works, it's a little loose. But please note this is NOT the bubble levels fault. It's because the Camvate cold shoe mount doesn't have a spring clip that's typically found on a camera's hot shoe. That spring clip is very important because it helps secure the bubble level.If you're using this bubble level with a hot or cold shoe mount that has a spring clip, you'll be absolutely fine. If you're using it with a hot or cold shoe that doesn't have a spring clip, you'll need to place a small piece of paper or tape between the bubble level and the cold shoe mount to help keep it secured, which is very easy to do.I also want to mention, like others have stated, that the seller is excellent! When they saw my original post they reached out to me to find out how they could help. I would highly recommend this item to anyone who's looking for a quality bubble level that's backed by a reputable seller.
Nancy Sigui
2025-05-18 18:08:03
Simple items that helps a lot at the photo shoot
Darek
2025-04-25 18:33:11
I am very disappointed in this product. The base has uneven thickness, so when it is slid inside the camera hot shoe, it moves. Such terrible fit renders this product useless. For a bubble level tool like this it is paramount that the product is designed and produced carefully. Another reviewer indicated exactly same problem, but then updated his review with a comment stating that the seller corrected the issue. This comment was from 2017, 5 years ago. I trusted that this issue is a thing of the past, but it appears that it is not. I needed this level for a project. It failed me. I strongly suggest to avoid this product and this seller. It cannot be trusted.
taksh bhargava
2025-03-25 14:47:49
Cute little add-on!
Hollow
2025-03-14 20:39:42
Exactly as described. Easy to fit. Works well.
Matthew Lynagh
2025-01-28 11:32:55
Great little tool for your tripod! Should have bought one earlier!
Recommended Products