Your cart is empty.
Your cart is empty.
- Dual Twin Beam 12" Dial HEIGHT GAGE .001'' Digital Digit Counter Gauge
- white Dial Face Size:
2-1/4'' - Range:
0-12" - Dial Graduation:
0.001" - Counter Reading:
0.1" - Double Column
- With Fine-Adjusting Wheel And Lock
- Bottom Surface of The Base is Hardened and Ground Lapped For Flatness
- Error-proof digital counter features a zero-reset button
- Dual Directional Mechanical Digital Counters Can Be Zero Set at Any Position Within The Range.
- Unit Dim L x W x H (in):
3-1/2 x 8-1/4 x 18-1/2 *Estimated* - Unit Weight:
9.45 lbs - Quantity: 1
Fresca
August 25, 2025
This was written by a hobby machinist, trying to save a buck over getting a Mitutoyo.In spite of what another reviewer has said, the one I got didn't have mixed measurement systems: The dial gauge is graduated in inches (.001) and the mechanical counters are in inches and tenths of inches.I tested some basic measurements on a granite reference plate against gauge blocks and all the measurements were accurate to .001 and repeatable to about .001. So, it works as advertised for its purpose. I didn't check anything over 4" tall.Vertically, the two columns are nearly perfectly perpedicular. With an indicator, I was observing about .0005 deviation in about 3 inches, so the unit leans back just slightly. By placing a small shim under one side I was able to get perfect zero deviation measurements on the indicator as the unit was cranked up and down. So, you could use the unit for perpendicularity testing (with an indicator instead of the scribe) by scraping the base a little to correct for this, which is my plan.Overall, this was a good value for the price.
Mike B.
August 20, 2025
Not bad, but not perfect. Didn't expect it to be, so ok. Like most Chinese stuff, finishing is up to the buyer. The base had burrs to be removed, which were because it's is machined, but does not appear to be ground. Certainly not chamfered, so sharp. Requires polishing before it will move easily. Otherwise appears to be usable.
Customer
August 4, 2025
Buenas tardesrecibà el producto con la caratula o protector plástico del reloj quebrado.
My Opinion
July 31, 2025
This is a very close copy of a Japanese brand I used when I worked in QC at a major manufacturer. It works very well for my limited need. I cannot check the precision but it appears to give very repeatable readings, thus I think it must be OK. Well, if I wanted the certified QC precision then I would have to spend 6-8 times as much for the genuine article.This is a well made heavy duty tool that will satisfy needs of any shop within its advertized parameters
Paul
July 31, 2025
Have bought two duel beam height gages. One has been in service two months and the other has been in service one month. Both are working great in a machine shop that works 24 hours a day 5 days a week. I would say that they get used at least a hundred times a day. When we got them we tested them out and they were very accurate for use in a machine shop. When we need more of this duel twin bean height gage we will buy this one. Update 8/19/19. I have now bought 6 duel beam height gages. This is a very good height gage. Like I said before they are in service 24 hours a day 5 days a week. You can not go wrong buying this gage.
GeezerDude
July 12, 2025
It's Chineseium but it works.
Customer
May 14, 2025
I have this a one star cause you couldn’t give it zero. Received the item it was defective. Sent it back and they sent me a replacement which was the right thing to due only for the replacement to be defective.
J. Wong
November 28, 2024
For a "generic" version of this gauge it is very well made! Absolutely repeatable readings, very smooth action of the elevator gears. Mounted a Mitutoyo 513-504T dial indicator in place of the carbide bit to create a height gauge accurate to .001" and an indicator accurate to .0005"! Absolutely terrific buy compared to "name brand"!
Recommended Products
$54.00
$ 23 .99 $23.99