Your cart is empty.
Your cart is empty.Product Description
It could be fixed on the wall according to the height of the car door to protect the vehicle door from damage from the bumper, body, and other places.
Semi-rigid foam prevents damage to vehicles and buildings, especially in areas with limited space.
The edge protector can be attached to the square column to protect the body in all directions.
Compatible with Various Walls
Instruction:
- Please clean and dry the wall surface and remove any particles on it;
- Peel approximately 4” or 10cm adhesive cover from one side and apply the protector on the wall.
- Slowly peel the rest of the adhesive cover and apply the protector on the wall at the same time to make sure it is straight and no space between it.
- Repeat the same steps above for the other side of your garage wall.
Notice before use:
- Please do not put under extremely high temperature or exposure to the sun for long;
- Please clean the wall surface and remove the dust or other particles and keep dry before sticking the strips to the wall;
- Protectors can be removed without leaving marks on the most of the surfaces (e.g. brick, tile, glass, or marble walls). But the removal on a brittle or lime wall pavement may need to do it with care because the adhesive is very strong.
Wide Application
MDC
2025-08-21 10:07:34
Quickly, it just sticks to anything! Do not expect to apply it and be able to move it a little to straighten it up. It will be stuck and immovable. Absolutely what I wanted to put on a post that splits my 2 car garage.
steve
2025-08-12 18:50:43
Who the heck designed this thing ?It’s almost impossible to separate the plastic from the Glued pad. It took me about 10-15 minutes just to peel the dam plastic cover off,What a STUPID design.Don’t waste your money.
Laura
2025-07-26 15:59:05
I'm in an underground garage and my parking spot is next to a pillar that has a big base. I was using pool noodles that looked horrible. This looks nice, lots of padding, and I'm not as worried about my car hitting the base now.
Benmoola
2025-06-19 14:57:29
Granted, it will not save your wall or your car, it makes it much more visible. It's a subtle reminder; " hey. I hit that once and caused your husband (or wife) thousands of dollars worth of damage, let's leave a little room for error." It's especially nice when your wife (or husband) relies soley on the backup camera, which does not cover the sides of the vehicle (hence the name backup camera). It encourages "a person" to turn around and look where they're backing, or at least use the rearview mirrors. Once in place, it will not come off, which is a good thing. Solid outer part and not too squishy, forgiving foam under the solid reflective part.
sophia
2025-06-05 18:44:29
Peeled tape on the first one came right off the protector. Then spent 10 minutes with a knife to peel off slowly. Pain in the butt. However it did stick well on the wall. The first one is useless
Bearwalker
2025-03-29 11:19:31
After 2 months, the adhesive layer delaminated from the product, leaving the entire adhesive layer on the wall. This unfortunately is a product failure. I now have to remove the adhesive from the wall which may be difficult.See photos.Functional, but tricky to get the back plastic off without the adhesive layer coming off as well. Sharp fingernails or a tweezer will help.Otherwise, a good product. I’d but it again.
Hogan
2025-03-18 16:18:18
My parking garage has extremely tight parking spaces and unfortunately placed pillars, so I have been consistently worried about a passager accidentally bumping the door. This completely solved the problem! They are incredibly sticky, and adhered to an admittedly very dirty pillar extremely easily, and it does not want to come off at all. The foam is dense enough to easily cushion even a very aggressively thrown open door, which was exactly what I needed! I would highly recommend this product, especially at this price.
G. Johnston
2025-03-06 09:07:02
After cleaning, prepping and marking the column where I intended to use these, I carefully peeled off the protective cover over the adhesive on one side, but all of the adhesive came off with the backing instead of staying on the foam rubber. Not even a residue of adhesive remained so of course it was useless for its intended purpose. I immediately reported to Amazon and will return these.
Alejandra Cespedes
2025-03-01 14:49:10
El producto llegó con burbujas. Luego lo pegamos con las indicaciones y después de unas semanas se despegó completamente de la pared.
Dave Brooks
2025-01-20 09:42:56
Nice and thick, looks good, but glue failed after a couple of months and these peeled off the brickwork.
Stuart A. Kingsley
2025-01-17 15:42:42
This product was used to protect two edges of a chest freezer in our garage (4 pieces). Unfortunately, the adhesive backing failed after temperatures rose slightly above 20 C. So I cannot recommend this product for even moderately elevated temperatures.
susan bickford
2024-12-14 12:32:58
says it is waterproof but first rain overnight 8 hours after fixing to wall it came away waste of money
F F. No delivery as yet!!
2024-11-23 18:46:39
When I peeled off the protective strip off it removed the adhesive from the protector, rendering it useless!
Recommended Products