Your cart is empty.
Your cart is empty.Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
PRR
2025-08-25 13:30:28
Purchased to replace radiator hose on a 2006 Lexus GX470. Fit perfect, no issues. Old hose was starting to balloon around the clamps so I replaced as preventative maintenance.
dph
2025-07-20 17:10:50
The Gates brand has been around for a very long time and are trustworthy! The radiator hoses, upper and lower, were installed on my daughters 2007 Lexus GX470. They are molded hoses and fit perfectly!
DanJoe
2025-07-15 21:26:42
Not OEM but great fit good quality
DM Dayon
2025-04-16 11:10:52
Came exactly as described. The fitment matched perfectly with the original equipment hose. I had no issues with installing.
CBerg
2025-03-12 11:02:50
I replaced my radiator, so I also replaced the hoses. The hose had the proper bends and length. Snug Fit inlet and outlet. I don't know if it will last but as for right now, I give it 5 stars.
Mr. T
2025-03-08 17:52:30
Because of my milage, I needed to change my timing belt. And we all know that if you are taking the time to change your timing belt, you might as well "blow the damn money" and change out the other parts associated to the inexpensive repair of a timing belt. I so hate timing belts!The part arrived promptly and has been installed. I did not verify money saved, but was able to manage how the spending of this job by ordering parts ahead of the repair.
nkowi
2025-02-17 14:44:26
Bought this lower radiator host (fits V84Runners and GX470s) as part of a timing belt replacement on my Lexus GX470. Wouldn't it figure that one of the very last things to be installed was this hose - and it doesn't come close to fitting. I wondered if I'd somehow ordered the wrong hose so I checked four different websites, all of which confirmed that the Gates 22832 is correct for my application. Took the hose, along with the original, to a local Autozone for yet another check. They looked up my vehicle, went to the back and produced a Gates 22832 that exactly matched the one I got from Amazon. The next morning I went to NAPA and bought their house brand (made, according to NAPA, by Gates) which matched the OEM part exactly. Given that I received a totally incorrect part from Amazon then saw another at a local parts house that was exactly the same, but both were labelled with what should have been the correct part number, I can only surmise that Gates released batch of these into the market that are three inches too short, have the wrong inside diameter on one end and are not the correct shape, but that are marked 22832. The attached photo shows the OEM hose on the bottom, then the NAPA brand (again, produced by Gates) then on top is the hose I received from Amazon.
PKH
2025-02-04 17:03:16
Wrong size for GX470. Diameter is too small. Correct part number per gates, but either mislabeled or something else is messed up.
Recommended Products
$37.44
$ 19 .99 $19.99