Your cart is empty.
Your cart is empty.Connect this Goodyear EPDM rubber hose to any air hose for 72in. added length and to prevent hoses from becoming entangled while working with air tools. U.S.A.
Larry Daves
2025-08-26 19:34:16
Great Product !!!!
Larry Daves
2025-08-24 11:37:04
Great Product !!!!
Robert McHugh
2025-08-15 19:22:46
Bought this for my portable air tank along with a petcock value. Works really well - doesn't leak on the fittings. Far superior to a plastic one you might buy at HF
Lee W
2025-08-07 11:57:09
This is a nice strong well made air hose that met my need for a hose connection to my air compressor. I used it as a primary hose line from my compressor, with a quick connector at the end to attach other hose extensions and accessories.
Daniel C. Duplechian
2025-07-24 17:10:11
I needed this to connect my air compressor filter to the air hose reel. Good length, fittings look good.
Over 16 Years Reviewing 1 Million Views
2025-07-20 18:52:02
I purchased a small 7 gallon compressor tank to take items around portable. However the plastic hose that came with it was cheap plastic and broke the first time I used it. I did not want to have something that would not take being put in the back of a truck and moved around a lot. This item here is sturdy and well built. The connections have a long thread allowing for a good seal plus it is extremely flexible. I had no problem using the item and there are no leaks. It appears to be one of the best hoses out here you may find a little bit cheaper to spend the extra get this one and you will have any problems.
Clueless
2025-07-15 12:54:27
I don't have much experience with these hoses yet to comment on durability. But they seem very serviceable and there's no reason to expect that they wouldn't hold up well. My only complaint is that the fittings are pretty restrictive for a 3/8" hose. The 1/4" male NPT starts out at a generous 8.6mm, which is a pretty good match for 3/8" hose. But the fitting necks down to something like 6.75mm as it transitions into the barb. For high demand use, this is limiting. By comparison, a Milton V ( aka "high flow" ) 1/4" plug maintains about 7.5mm. The 3/8" air size plugs are even bigger.If you are feeding a tool that demands 20 CFM or more, be prepared for some pressure drop. OTOH, if you are using something like 1/4" industrial interchange fittings then they will dominate at around 5mm or a little less.
joe
2025-07-14 13:58:22
worked perfectly, seems sturdy
Michael
2025-07-01 20:03:12
I bought this to connect my impact wrench to my pancake air compressor. It's exactly what I needed. The quality is better than I expected for the price.
Zager
2025-06-22 20:40:35
Good quality rubber. Seams durable, less likely to collapse.
DTO
2025-06-05 10:24:27
Worked well as a feeder hose from compressor to house reel. Nice flexible rubber. Seems well built.
Aron
2025-05-29 12:59:57
Good quality hose.
John
2025-05-11 17:49:53
Works great for what i needed it for.
rob leigh
2025-04-21 14:02:42
Works great
Robert McHugh
2025-04-19 11:21:16
Bought this for my portable air tank along with a petcock value. Works really well - doesn't leak on the fittings. Far superior to a plastic one you might buy at HF
Lee W
2025-04-09 10:46:29
This is a nice strong well made air hose that met my need for a hose connection to my air compressor. I used it as a primary hose line from my compressor, with a quick connector at the end to attach other hose extensions and accessories.
Daniel C. Duplechian
2025-03-07 17:46:31
I needed this to connect my air compressor filter to the air hose reel. Good length, fittings look good.
Over 16 Years Reviewing 1 Million Views
2025-02-25 18:31:27
I purchased a small 7 gallon compressor tank to take items around portable. However the plastic hose that came with it was cheap plastic and broke the first time I used it. I did not want to have something that would not take being put in the back of a truck and moved around a lot. This item here is sturdy and well built. The connections have a long thread allowing for a good seal plus it is extremely flexible. I had no problem using the item and there are no leaks. It appears to be one of the best hoses out here you may find a little bit cheaper to spend the extra get this one and you will have any problems.
Clueless
2025-02-21 20:48:26
I don't have much experience with these hoses yet to comment on durability. But they seem very serviceable and there's no reason to expect that they wouldn't hold up well. My only complaint is that the fittings are pretty restrictive for a 3/8" hose. The 1/4" male NPT starts out at a generous 8.6mm, which is a pretty good match for 3/8" hose. But the fitting necks down to something like 6.75mm as it transitions into the barb. For high demand use, this is limiting. By comparison, a Milton V ( aka "high flow" ) 1/4" plug maintains about 7.5mm. The 3/8" air size plugs are even bigger.If you are feeding a tool that demands 20 CFM or more, be prepared for some pressure drop. OTOH, if you are using something like 1/4" industrial interchange fittings then they will dominate at around 5mm or a little less.
joe
2025-02-01 17:09:32
worked perfectly, seems sturdy
Michael
2025-01-31 09:17:18
I bought this to connect my impact wrench to my pancake air compressor. It's exactly what I needed. The quality is better than I expected for the price.
Zager
2025-01-22 16:56:23
Good quality rubber. Seams durable, less likely to collapse.
DTO
2024-12-31 15:32:36
Worked well as a feeder hose from compressor to house reel. Nice flexible rubber. Seems well built.
Aron
2024-12-21 13:30:04
Good quality hose.
John
2024-12-07 10:14:48
Works great for what i needed it for.
rob leigh
2024-11-25 09:35:22
Works great
Recommended Products
