Your cart is empty.
Your cart is empty.Product Description
Name: 5V USB heating handle cover with memory function
Material: PET metal heating film + Kevlar wear-resistant cloth
Working voltage: DC 5V
Working temperature: -30°C---+70°C
Connection method: Can be directly connected to the 5V/2A USB charging port
Will Shaferly
2025-08-31 12:39:03
Kept my hands pretty warm through most of early winter. These plus some winter gloves should keep you relatively warm down to 35 degrees or so. Didn't find them too cumbersome, they have a pretty low profile and needed minimal adjustment over a couple months. They did make it a little more difficult to keep grip on the throttle. Good quality and functionality for a cheaper product.
Starwars217
2025-08-18 16:05:29
First off, they work fine. They get sufficiently warm, and weren't too difficult to install. The only issue I have is getting the velcro tight enough on heater cover on the throttle side. I've experimented with double sided tape to help keep the heater element in place, but even with that, it ultimately it slips when you twist the throttle. In some cases, it caused some issues accelerating, or getting the wiring bound up. I ended up removing them and will revisit another solution in one it gets cooler again. Could be a 5 star for performance and price, but not being able to get tight enough on the throttle side knocks off one star.
The Greek
2025-08-17 13:36:52
Originally bought these because I didn't want to commit to putting heated grips on. I originally bought these for a Harley and they won't fit around the grip. That's okay I'm going to use them on my KLR instead. I like the fact that you can remove them. The harness and the plugs to the grips seem pretty robust. So I wrapped these around a piece of conduit and put them on a power supply. At just around 13 volts it draws 2.5 amps on high and then starts to actually get down to 2 amps as it warms up. When you first start them up there's a red light on that pulses and it ramps up the heat pretty quick and then eventually it will turn blue to a medium setting. The setting definitely is warm enough. High gets very hot but then again I didn't have gloves on nor did I have them wrapped around the grips. I did have them on the conduit to act as a bit of a heat sink to simulate that and they still get very hot. The low is low but you can still feel it with your bare hand and it's still fairly hot. I'm going to quickly wire these up and use these for cold morning commutes. One thing I do like as I stated is you can pull these grips off put them away when you don't need them. The velcro on them is very strong and the harness is wrapped in a webbing to help protect it. The on and off switch is also a good size so you can easily operate it with your gloves and again it looks very robust. Time will tell how long these last but for the price point I still think it's a great deal. I only wish they would make ones that would fit a 1.5 inch grip
Reviewer/Answers
2025-08-16 16:00:45
Put these on a 2022 CF Moto C-Force 600. They are slightly smaller lenth wise but are snug fit. They are very warm. Seem to be made well. Harnesses are quality.
Eric Nelson
2025-08-04 14:53:34
I have a 2024 klx 230 sm that i use year-round in Pennsylvania. I got these because the price didn't seem that bad and if they didn't work well I wouldn't be out much money. with that being said so far they have been great! the temps have gotten down to 50s when leaving work and my ride home is about 15 minutes. it keeps your hands really warm once you let them get up to temp, almost to the point that you could burn yourself if you're using these without gloves.(ive already done that haha) I'm waiting to see how much they help when it's around or below freezing. we will see. for making your rides more enjoyable in the 50s these are great so definitely recommend if you are using them for that! ill return to this most likely when winter comes.
James Eoe
2025-08-03 16:36:15
As mentioned in the title. These are decent! They do keep your palms warm under 40 degrees. My only issue like I said, is that they don't really grip all too well on the handle grips which in turn causes them to slip around as you're holding onto your bars.They're a bit cumbersome on the throttle hand as they make you think you're applying throttle but it's just the darn heated covers slipping under your hand.I wouldn't buy these again just over the fact they can potentially cause some sort of danger. Plus they're not the hottest thing in the warm as I've tried to ride with these in 20 degree (plus wind chill) weather and they do not hold up. Not only that, after a good season or so, there's dead zones within the grips.You're better off buying proper heated grips that power off your cycle instead of these. They'll most likely be even warmer and more reliable. That's what I plan to do anyway.
nice
2025-08-01 16:46:02
The product was pretty good
Customer
2025-07-29 14:29:03
Good heat, simple to use, not bad to install. I used them for an application for which they were not designed and they work. I had to use black electric tape to secure them on the handles since they were smooth steel and wanted to slide off, there again, not the proper application. They are thin enough that they didn't significantly impact the feel of the controls. Good product.
Tommy
2025-07-22 15:29:47
La poignée de droite est trop petite car les motos que le gaz fonctionne en tournant la poignée droite, la poignée est un peu plus grosse et ces poignées sont du même diamètre des deux côtés
KevT
2025-07-12 10:54:08
I recieved these heated pads yesterday and immediately installed them on my bike.Installaltion was really easy, in fact the most difficult thing was tidying uo the wires afterwards. The pads fit nicely on my grips, the wiring routed inside my fairing in to the ignition live fuse relay box kit that I got from Amazon. With that box kit my accesories only switch on if my ignition is on.I used them for the first time this morning on my commute to work. It was really cold out so I thought it would be a good opportunity to try the grip pads.WOW they get really hot!, I started off on the hottest setting and the heat is instantanious, I had to turn them down to the lowest setting and they were still really warm through my gloves.I really hope that they continue to work as they do now, I think they will help extend bike season here in Canada into the fall.I'm really happy with the purchase, and for the price they are great! Much cheaper and easier to install than tradional heated grips.I give them top marks!
Vincent M.
2025-07-11 18:41:23
Like the idea of having heated grips that come off easily. Had hardwired ones for my atv's but these will work great for my adventure bike. USB powered.
Daran Jex
2025-06-16 19:59:45
These will work in so many applications. As long as you have 12vdc and handle bars.They get really hot so follow the instructions and start on low and don’t use high with bare handsHot hot hot lol
Dbl
2025-06-07 10:22:32
Eaay to install, and i like the Larger button for use on snowmobile with gloves, havent tried the heat yet
Will Shaferly
2025-05-24 18:41:14
Kept my hands pretty warm through most of early winter. These plus some winter gloves should keep you relatively warm down to 35 degrees or so. Didn't find them too cumbersome, they have a pretty low profile and needed minimal adjustment over a couple months. They did make it a little more difficult to keep grip on the throttle. Good quality and functionality for a cheaper product.
Starwars217
2025-05-19 15:54:27
First off, they work fine. They get sufficiently warm, and weren't too difficult to install. The only issue I have is getting the velcro tight enough on heater cover on the throttle side. I've experimented with double sided tape to help keep the heater element in place, but even with that, it ultimately it slips when you twist the throttle. In some cases, it caused some issues accelerating, or getting the wiring bound up. I ended up removing them and will revisit another solution in one it gets cooler again. Could be a 5 star for performance and price, but not being able to get tight enough on the throttle side knocks off one star.
The Greek
2025-04-22 14:12:10
Originally bought these because I didn't want to commit to putting heated grips on. I originally bought these for a Harley and they won't fit around the grip. That's okay I'm going to use them on my KLR instead. I like the fact that you can remove them. The harness and the plugs to the grips seem pretty robust. So I wrapped these around a piece of conduit and put them on a power supply. At just around 13 volts it draws 2.5 amps on high and then starts to actually get down to 2 amps as it warms up. When you first start them up there's a red light on that pulses and it ramps up the heat pretty quick and then eventually it will turn blue to a medium setting. The setting definitely is warm enough. High gets very hot but then again I didn't have gloves on nor did I have them wrapped around the grips. I did have them on the conduit to act as a bit of a heat sink to simulate that and they still get very hot. The low is low but you can still feel it with your bare hand and it's still fairly hot. I'm going to quickly wire these up and use these for cold morning commutes. One thing I do like as I stated is you can pull these grips off put them away when you don't need them. The velcro on them is very strong and the harness is wrapped in a webbing to help protect it. The on and off switch is also a good size so you can easily operate it with your gloves and again it looks very robust. Time will tell how long these last but for the price point I still think it's a great deal. I only wish they would make ones that would fit a 1.5 inch grip
Reviewer/Answers
2025-04-21 11:38:37
Put these on a 2022 CF Moto C-Force 600. They are slightly smaller lenth wise but are snug fit. They are very warm. Seem to be made well. Harnesses are quality.
Eric Nelson
2025-04-16 10:27:27
I have a 2024 klx 230 sm that i use year-round in Pennsylvania. I got these because the price didn't seem that bad and if they didn't work well I wouldn't be out much money. with that being said so far they have been great! the temps have gotten down to 50s when leaving work and my ride home is about 15 minutes. it keeps your hands really warm once you let them get up to temp, almost to the point that you could burn yourself if you're using these without gloves.(ive already done that haha) I'm waiting to see how much they help when it's around or below freezing. we will see. for making your rides more enjoyable in the 50s these are great so definitely recommend if you are using them for that! ill return to this most likely when winter comes.
James Eoe
2025-04-13 12:42:52
As mentioned in the title. These are decent! They do keep your palms warm under 40 degrees. My only issue like I said, is that they don't really grip all too well on the handle grips which in turn causes them to slip around as you're holding onto your bars.They're a bit cumbersome on the throttle hand as they make you think you're applying throttle but it's just the darn heated covers slipping under your hand.I wouldn't buy these again just over the fact they can potentially cause some sort of danger. Plus they're not the hottest thing in the warm as I've tried to ride with these in 20 degree (plus wind chill) weather and they do not hold up. Not only that, after a good season or so, there's dead zones within the grips.You're better off buying proper heated grips that power off your cycle instead of these. They'll most likely be even warmer and more reliable. That's what I plan to do anyway.
nice
2025-04-04 13:32:55
The product was pretty good
Customer
2025-03-30 17:11:22
Good heat, simple to use, not bad to install. I used them for an application for which they were not designed and they work. I had to use black electric tape to secure them on the handles since they were smooth steel and wanted to slide off, there again, not the proper application. They are thin enough that they didn't significantly impact the feel of the controls. Good product.
Tommy
2025-03-23 11:35:40
La poignée de droite est trop petite car les motos que le gaz fonctionne en tournant la poignée droite, la poignée est un peu plus grosse et ces poignées sont du même diamètre des deux côtés
KevT
2025-03-22 15:09:17
I recieved these heated pads yesterday and immediately installed them on my bike.Installaltion was really easy, in fact the most difficult thing was tidying uo the wires afterwards. The pads fit nicely on my grips, the wiring routed inside my fairing in to the ignition live fuse relay box kit that I got from Amazon. With that box kit my accesories only switch on if my ignition is on.I used them for the first time this morning on my commute to work. It was really cold out so I thought it would be a good opportunity to try the grip pads.WOW they get really hot!, I started off on the hottest setting and the heat is instantanious, I had to turn them down to the lowest setting and they were still really warm through my gloves.I really hope that they continue to work as they do now, I think they will help extend bike season here in Canada into the fall.I'm really happy with the purchase, and for the price they are great! Much cheaper and easier to install than tradional heated grips.I give them top marks!
Vincent M.
2025-02-17 11:57:51
Like the idea of having heated grips that come off easily. Had hardwired ones for my atv's but these will work great for my adventure bike. USB powered.
Daran Jex
2025-02-14 13:06:10
These will work in so many applications. As long as you have 12vdc and handle bars.They get really hot so follow the instructions and start on low and don’t use high with bare handsHot hot hot lol
Dbl
2025-02-11 13:39:09
Eaay to install, and i like the Larger button for use on snowmobile with gloves, havent tried the heat yet
Recommended Products
$77.95
$ 36 .99 $36.99