Pros: Very sturdy, well made, easy to assemble and install with instructions (took me 20 mins or so), very easy to adjust horizontally (I did have to lightly loosen a few joints...but not by much). If using for a monitor, you can easily rotate from landscape to portrait position and tilt back and forward.Cons: Once you choose a height for the "arm"...you need to use an allen wrench (handily placed on the pole) to adjust it. The arms only articulate on a horizontal plane...meaning you can't adjust the monitor/laptop stand up and down except by changing the height on the pole with the allen wrench. The middle joint on the "arm" has limited range of movement, perhaps a bit less than 90 degrees, so you can't push the monitor all the back toward the pole if it is bent (I'd say I got it about 4" from the pole but only by placing the joint on the pole so it starts as if it's coming out toward the back.)I will add pictures to this review soon to demonstrate my comments above.Overall, a great solution for what I wanted. I had two monitors on my standing desk, and we just got laptops. For a while, I'm using the laptop separately from my dual monitor desktop (possibly forever). There was no room on my standing desk for the laptop, so this device gave me a stand for that as well as replaced the monitor stand that took up room on the standing desk. I was initially concerned about all of this weight on my thin 1/2" likely particle board desktop, but found that the metal framework for the moving part of the desk ran the full length of the desk at the back and front. The clamp is closed on that metal bracket, reinforcing the desktop material without the need to add anything. I was planning to add a 6" x 3" x1/2" pieces of wood to the top and bottom of the desktop when clamping it in place to reinforce and redistribute weight a bit initially, and would still recommend that for thin or glass desktops...but I got lucky and didn't have to.My expectations for more arm movement was likely based on a wall bracket I have for a tv at home that permits it to fold nearly flat to the wall. It is an offset arm at the middle joint. I didn't pay attention to that when looking for a laptop/monitor solution. That said, it does what I need it to do. If you need it to sit almost flat to the back of the desk in any position other than full arm extended out to the side, this won't do that. Also, if you have two monitors on this stand, they can not be on the same level. One will be higher than the other.Overall, for the price...a great and sturdy little set-up. No complaints on my part!

Used this to mount a 27" monitor and laptop. I was very impressed with the construction and ability to make adjustment at several joints to really customize the positions of the monitor and laptop table. The most impressive observation is that everything is made out of metal, which is a pretty decent gauge. Even the joints around the vertical tube are metal. In summary, it works extremely well and very rigid. They also proved two different length screws for attaching the bracket to your monitor with a few plastic spacers if needed.

This thing ended up being a little better than I thought it would be. Assembly was easy enough and the components appear sturdy. It is currently supporting a 17" gaming laptop (~7.5 lbs) and a 27" monitor (~8 lbs) and appears to be holding both well.My only issue is with the hardware included for mounting a monitor with a curved back or otherwise recessed VESA mount.The hardware amounts to a set of screws and spacers that were both just a touch too long for my monitor. I was able to get it up, but the screws don't sit quite flush with the VESA plate which creates a possible point of failure.If the screws and/or spacers were a touch shorter, or if they provided some shorter options, this would have been a perfect budget rig for mounting the battle station.

Good quality. Easy to assemble. Clear instructions

Easy to assemble and hides all wires. Makes my workspace look clean, neat, organized and ready to be productive. I Highly recommend this.

I was looking for some options to expand on the functionality of my computer desk. I have an IKEA Fredde desk and recently I saw IKEA sold clamp-on shelf attachments for tables or desks. This had me wondering what else is out there. This is when I came across this product.I had chosen it because unlike many other options that seemed either more focused on dual screen setups this product was designed for a screen and laptop or tablet. This is perfect for my purposes as it would free up space formerly taken up by a monitor, as well as that of a laptop or keyboard. My intended use was for having a setup ideal for plugging in multiple inputs to a monitor while I can also work on the desk. I have a retro computer workstation and use a small multipurpose television so I can plug in HDMI, VGA, RCA, and RF all running to various computers. So to lift the monitor off the desk is great as it frees up space, makes accessing ports easier, and with the flexibility of the neck on this product I can move the monitor up, down or swivel it out of the way if I am using the desk for other purposes. The attachment to screw in a television or monitor is great.I also like the laptop holder. It is a tray that can be angled and is large enough to hold pretty much any size laptop or tablet. Again, this is nice because it frees up so much space. If you don’t intend on using a laptop, this could also be perfect for holding something else like a small gaming console, drum machines or synthesizers, or even just papers. If you don’t want to do any of that one cool thing I noticed is that the laptop tray attaches using the same bracket that is used for monitors and TVs, so you could wire up a couple monitors on top of each other and have a dual monitor setup if so desired.Another really cool option that I was unaware of when I purchased this was that in addition to the clamp-on option, this also has a stationary option where if your desk has a grommet you can attach the the main pole to the desk. The grommet size would have to be large enough, or if you are crafty you could use a hole saw attachment and drill your own but I would much rather use the clamp, as it is very sturdy, which leads me to my final point - the construction.This product arrived in a very organized box. When opened there were two a couple boxes and the laptop try neatly organized. When I opened everything all up everything was bagged and all the tiny bits (screws, nuts, hex wrenches) were all in a labeled bag with letters that correspond to the instructions The instructions were also very well written and detailed, which was something I did not expect. I think my only complaint (which isn’t really a complaint) was that the optional grommet build was in a separate box on the second page but both were visible when I had the instructions opened. I just did not see it at first and it did not impact my desired use but was nice knowing I could in the future, especially if I buy a new desk.The product also feels very high quality. Everything feels sturdy. The clamp, main pole, and even the necks feel heavy and thick. They are all metal and have thick metal screws that tighten with a hex wrench so you can keep things still. No plastic clamps or screws so risk of stripping or breakage seems far less likely and since they are standard sized metal screws, I suppose you could buy replacements at a hardware store. The only construction part I kind of questioned was when attaching the clamp together, it uses three screws but no but to secure them but I don’t see this as being an issue - the screws tighten very well and don’t feel like they are going anywhere.Overall this product is the best deal you could want from something like this. It doesn’t feel like the pieces will slide and flop around once you have it setup and the metal parts are nice and strong so no worry they will bend or break. While I am using an older television with this, newer monitors and TVs have gotten so light that I imagine you could use this with a pretty large screen. If I ever needed a dual or quad screen setup, this would definitely be an option.I almost forgot to mention cable management. This product also has plastic clips that go on the arms and tools to not only attach cables but it also has spots to store the hex wrenches for future adjustments.I did experience an issue with the monitor and tray tilting forward, even when no added weight was added. While the instructions just mention to tighten a bolt, it still tilted heavily so I removed the bolt to reveal there are two washers on either side of the mount. Each washer has two small indentations that line up with two holes on the mount. On the inside of the mount there is a plastic piece that has multiple holes. It looks as if this is to line up with the indentations and when you tighten the bolt they keep the monitor in place. What I had noticed was that they were not big enough and so the mount would move regardless of position. I tested with removing the two washers and instead wrapping a paper lip through the holes at the desired position to prevent the plastic piece from moving. When I reassembled the mount it worked and the monitor stayed in place.

I work from home, so it was nice to get this set up. It was an extremely easy set up with clear instructions, reasonably affordable price, very sturdy, holds my laptop 15" laptop and 27" monitor no problemI would highly recommend this!

Très bon produit.Attention 1 très mobile, 1 moins mobile .Solide !

Seguramente el mejor brazo soporte que he comprado. Los materiales y acabados son muy buenos, y sobre todo, es superfuerte y resistente

Really impressed with the HUANUO Monitor Arm with Laptop Tray! It’s sturdy, easy to set up, and holds both my monitor and laptop securely. The arm is fully adjustable, giving me the flexibility to arrange my workspace exactly how I want. Works well for screens ranging from 13 to 32 inches, and the laptop tray fits my 17-inch notebook perfectly. A great way to save desk space and improve ergonomics. Highly recommend!

Um meine Schreibtischoberfläche ein wenig besser zu organisieren und eine aufrechte Arbeitsposition bei der Bildschirmarbeit zu haben suchte ich nach einem Monitorhalterung. Da ich hauptsächlich mit einem Laptop arbeite war die flexible Nutzung Laptopablagefläche sowie Bildschirmhalterung für mich sehr interessant. Die Montage war einfach und in einer halben Stunde erledigt. Nach Fixierung aller Gelenke und Höheneinstellungen bin ich sehr zufrieden. 360° drehbar, stabil und günstig. Für durchschnittliche Ansprüche mehr als ausreichend. Was will man mehr? Von meiner Seite eine klare Kaufempfehlung.