Your cart is empty.
Your cart is empty.Product Description
Cold Rolling
Milling
Heat Treatment
Welding
Blade Teeth Selection Advice and Welding Joint Comparison
How to Improve Life
- Blade installation is the first step, make sure teeth is shown outside the guide, and blade strip is clamped tightly inside the guide.
- Teeth direction should be the same with the direction of wheel rotation, twist the blade from inside to outside if teeth direction is opposite.
- Running-in is required when blade cuts metal for the first time. It's important for blade life. During running-in, cutting speed should be 1/3 of normal speed, feed should be 1/4 of normal feed. Usually, after the blade cuts the first several pieces, like 5-10 pieces, adjust cutting speed and feed gradually to normal speed according relative parameters and your metal.
- Blade tension will be different for differnt wide blades, as time goes on, blade tension will be reduced by the bandsaw and blade stretch, make sure the blade is correct tension, our recommended blade tension is 300N/mm2.
- Coolant will be useful to cool and lubricate blade and teeth during cutting, better coolant could avoid overheat on the teeth of the blade, and reduce friction between the blade and the metal you cut.
- Teeth selection is also important, here are our experience:
- big variable teeths (like 3/4TPI, 4/6TPI, 5/8TPI) are for cutting ferrous solid rod with big diameter;
- big constant teeth (like 6TPI) is for cutting ferrous solid rod with small diameter;
- big variable teeth (like 6/10TPI) is for cutting aluminum, copper, brass etc and other non-ferrous metal;
- middle variable teeths (like 8/12TPI, 10/14TPI) are for ferrous thick tubing, profile, sheet, plate etc;
- small constant teeth (14TPI) is for general purpose;
- small variable teeths (like 12/16TPI, 14/18TPI) is for ferrous thin tubing, sheet, plate, profile etc;
- small constant teeth (24TPI) is for ferrous thin tubing, plate, sheet etc, don't cut non-ferrous metal, like aluminum etc.
Welding Joint
We weld blades with high performance welding machine to make sure welding joint looks perfect.
Teeth Direction
Default teeth direction is rightward, if you want leftward direction, please twist the blade from inside to outside.
Original Package
Brand new with original package for this blade with tips behind blade pacakge to help customers.
Metalworking Type
Bi-metal blade is designed for metalworking, ideal for metalworking craftman, blacksmith, mechanic etc.
Compatibility
Accurate length with high performance, compatible with most bandsaws with more choices on teeth pitch.
Ideal DIY Tools
Bi-metal type, M42 grade, 8% cobalt with 2% tungsten, much more fatigue resistant and durable on metal.
Blade Life
Spring steel backer strengthens blade life, hardened edges to cut metal straightly with ease, blade works with high performance.
quacky
2025-08-21 12:56:14
The variable teeth works well for different shapes of metal. I use my saw several time a week, and this blade lasted over a year. They are very good quality.
Mont Schroeder
2025-08-13 21:56:02
No complaints, everything finey and the blade can last up to 1 year!
Customer
2025-08-07 17:47:38
I have used this same blade several times now and they have worked well for me all along. I recommend these highly.
Mark Huth
2025-06-16 12:07:19
I bought this to cut metal on my older 14" Jet bandsaw that I have added the 3-speed pulley set to. Blade cuts aluminum fine, and would cut steel with some cutting lubrication. Unfortunately, there is a wobble in the blade of about .05", which makes operation very uneven. Poor quality control is the likely issue, as others have reported a similar problem.I have upgraded the rating to 4 stars as I have received excellent service from the vendor. He sent a replacement 6/10 blade after I told him I was cutting aluminum. The second blade was much straighter and cut the aluminum quickly and the resulting cut was easy to de-bur.Finally, many common 14-in band saws need a 93-1/2 inch blade rather than a 93 inch blade. That was my mistake (and Amazon's wretched search engine). Fortunately, I have added a quick change lever to my saw and the adjustment range was adequate to allow use of the 93 inch blade.
usahd32
2025-05-24 09:47:29
Been running this blade for about a month now in a small fab shop cutting mostly heavy wall DOM and 4140. It is holding up well to daily use. Only bad I have to say about it is that it does not run as smooth as a more expensive name brand blade. Having said that I believe it is a good blade and will order again when needed. I will update again if need be but I figure I have already gotten my money out of this one.9-17-20 update. Blade finally broke. I ordered two more:)12-6-22 update. This blade has become my go to. I changed 4 stars to 5 stars. For the money it can't be beat
Kindle Customer
2025-04-22 11:55:01
Good
charles c. massey
2025-03-20 09:43:55
Perfect fit for my band saw
feelthepayne
2025-03-09 19:33:23
I bought one of these blades back in 2021 and 3 years later I am finally getting ready to replace it due to several missing teeth and noticeably rounded off teeth on much of the blade. I am not gentle on my tools, and while I'm just a weekend warrior, I'm usually in a hurry to get things done with limited time I have available to work on projects. I run my saw hard. I never use coolant as it makes a sticky mess and I use my saw for wood projects as well as metal. I have run all manner of materials through my saw, plastics, soft woods, hard woods, aluminum, steel and even some stainless. This blade has stood up to my abuse for what I would consider a very good amount of time for what the blade costs. I run my blade banjo-tight and the weld hasn't snapped. Just this past weekend I noticed it was grabbing more than usual which led me to inspect the teeth a little closer which is when I discovered the damage. I will be purchasing a replacement soon, as my bandsaw is an extremely valuable piece of equipment in my shop and these blades keep it running without much fuss at all.
Eloi tousignant
2025-02-17 20:56:12
elle vas tres bien apres essay
Recommended Products
$36.79
$ 18 .99 $18.99
$29.99
$ 14 .99 $14.99
$29.39
$ 13 .99 $13.99
$20.99
$ 9 .99 $9.99