Shopping Cart

Your cart is empty.

Your cart is empty.

K & S K&S 83061 Round Aluminum Tube, 1/4' OD x 0.049' Wall x 12' Long, 1 Piece, Made in The USA

Free shipping on orders over $29.99

$8.40

$ 4 .99 $4.99

In Stock

About this item

  • Alloy 6061-T6
  • High Quality; Pure Aluminum
  • REACH/ROHS/Hazardous Minerals Compliant
  • Made in the USA


K & S K&S 83061 Round Aluminum Tube, 1/4" OD x 0.049" Wall x 12" Long, 1 Piece, Made in The USA


John Dexter
2025-08-20 10:15:00
I rewired an old Lionel train floodlight and needed a tube to run the wires through. The tube was the perfect size inside and outside. It is rugged and it took a while to cut to length with a hacksaw which I liked because it didn’t deflect when I cut it. My order was filled promptly.
Zack
2025-08-11 10:48:43
did what it needed.
TDub
2025-07-10 17:18:58
Was straight and round. Very substantial.
Gedzkie
2025-07-07 14:33:41
I used this to splice a high pressure AC line on my semi tractor. Worked great and saved me a lot of money.
Dennis Mountains
2025-07-06 16:57:56
These are well made. Despite being loosely packed in a box with some heavy objects, they arrived undamaged. They are nice and straight. I'm going to tap the ends for a #8-32 thread.
krizzle
2025-06-25 16:25:20
We bought for an electric yarn spinner project. These tubes are nice but we only bought on Amazon because our local hardware store didn't have stock.
From galt ca
2025-06-16 15:33:52
did my job perfect
FRANCIS
2025-06-03 14:03:18
Pipe came as promised. Easy to use and cut
ツカモトカネユキ
2025-05-16 21:21:57
タイトルでは内径9.05mmなので、(9.53-9.05)/2=0.24mmだと思うのですが、パッケージ、商品説明の肉厚は、0.049インチ(1.2446mm)です。商品は、パッケージのサイズです。できれば、この中間サイズ(肉厚0.5mm)があればよいと思いました。
Rusty Shackleford
2025-05-14 14:34:52
It fits the whole I needed to slide it into perfectly!
Cliente
2025-04-17 21:43:35
Arrivato in perfette condizioni e nel suo astuccio come da descrizione.Attenzione ai dati dichiarati, lunghezza e diametro esterno sono esatti, mentre per questo modello si parla di spessore della parete di 1,25 mm.
Gareth Wood
2025-04-05 16:22:35
Slightly undersize ID but can be quickly fixed for M4 clearance
M&M
2025-02-17 13:50:59
凧作製(直径5.5mmのグラスファイバーのソリッドバー接続)のため、外径 1/4インチ(6.35mm) 内径5.87mmと記述されていましたので、内径を信用して2本発注しました。しかし、内径の実寸は、3.6(3.57~3.67mm程度のため、まったく無駄になりました。実物を見て購入できない以上、商品の仕様は、正確に記述していただきたい。