Shopping Cart

Your cart is empty.

Your cart is empty.

KEMIMOTO X3 Wheel Bearing Grease Tool 39mm Compatible with Can-Am Maverick X3 & MAX Turbo RR 2023 2022 2021 2020 2019 2018 2017 OE Replace 293350109

4.7 (9) Write Review
Free shipping on orders over $29.99

$19.99

$ 8 .99 $8.99

In Stock
  • 39MM x3 wheel bearing greaser is a clever tool to make a tough job easy, helps you save lots of time greasing your wheel bearings that should have been done from the factory. It will fit perfectly easy to use
  • With Kemimoto Maverick x3 wheel bearing greaser, you could see the grease in the bearing after. The O-ring seal design enables you to save grease and prevent grease from seeping out during use
  • There is not very much grease in the bearings from the factory. Having a greaser tool for Maverick x3 makes your wheel bearing greased and run smoothly quickly, which is a lot cheaper than having to replace the dried-up bearings
  • The material of X3 wheel bearing grease is made of aluminum, which is remarkable for resisting corrosion 39 mm greaser tool is designed for long-term use. Knurled surfaces help you install grease grab it tightly and take it out easily
  • X3 wheel bearing grease is a must-have addition to your toolbox if you own a Maverick X3 MAX XRS XDS RC Turbo R. Note: 39mm wheel bearing grease is not compatible with 2017- 2022 Can-Am Maverick XXC and OE Replace 293350109


Product Description

can am x3 accessories

Why you need Wheel Bearing Greaser Tool?

Do your bearings constantly break down? Due to lack of grease?

Do you need to go to the factory frequently to replace the bearings?

Do you think that is wasting time and money?

Do you want to keep your beloved vehicle wheel bearings greased and running smoothly really quickly?

The best maintenance purchase for servicing your X3 SxS bearings is coming!

Everybody with a maverick x3 should own this 39mm wheel bearing grease. There is no need to remove the axle with this tool, just only the wheel & hub be removed.

Just only remove the wheel and brake caliper, and hub, apply grease in the wheel bearing directly and then insert it into the axle, and then inject the grease effortlessly.

kemimoto 39mm Wheel Bearing Greaser Tool

Kemimoto X3 Wheel Bearing Greaser Tool:

Tips:

When you put the wheel bearing grease in and take it out, make sure your axes shaft is straight.

Before using 39mm wheel bearing grease, greased the front lip and o-rings will allow to lift the axle shaft slightly and make alignment of greaser tool easier.

We are recommending to turn unit after each pump to equal out grease placement.

Due to the axle pointing downwards, when inserting or removing the wheel you need to pull upward.

Then you can make removal easier without tools. Do you look forward to it? Do you want to have it?

What a time saver. It should be in every rider's toolbox.

A must have ! Just go and take it home quickly ! ! !

Can am X3 accessories

CHRIS
August 26, 2025
works great easy to use and fit my x3 perfectly
SandFleaDDH
August 17, 2025
Perfect fit. Made an easy job even easier. Essential tool for any Can Am owner. Factory bearings have like zero grease on them. Do yourself a favor and get this tool, and get to work.
Darrell
June 19, 2025
Fast and easy way to grease up wheel bearings!!!!
James
June 3, 2025
Zerk fitting broke on first use. Seller sent me out a whole new one. I haven't had the chance to use it yet, but good on the seller for sending out another whole unit. I only needed a new Zerk fitting.
BC
April 13, 2025
This grease tool fit correctly and functions well. I used it on a 2019 Can Am Maverick X3 Turbo RC. I'd recommend getting one. I'd really recommend greasing the bearings on your Can Am ahead of schedule. I went 1900 miles over and struggled getting the hubs off. The tool hopefully fixed that problem.
Jim
March 24, 2025
Easy no mess
Steven Warner
March 8, 2025
Worked perfectly thanks took several pumps of grease per bearing
David R
December 14, 2024
While trying this out I’m sure it works fine as most have stated but my grease gun leaked bad with this zerk fitting. I have two guns one standard pump and a dwalt cordless grease gun and both leaked. I noticed when snapping the hose on the fitting it had a lot of play so I’m changing the fitting out tomorrow and gonna try it again.UPDATE: I did buy a new a grease fitting and noticed the one that came with the tool was manufactured wrong I updated pictures so it did work with the new fitting fine but I’m keeping the 3 star review because of quality control just isn’t there.
Jean-Claude Bouthillette
December 11, 2024
très bon produit