Your cart is empty.
Your cart is empty.Product Description
LORESO Tube Bender, 3 In 1 for 1/4" 5/16" 3/8" 0-180 Degrees Tubing Bending Tools
3-in-1 manual tube and pipe bender
- An essential tool for all tradesmen working in plumbing, construction, manufacturing, heating, air conditioning, electrical fields and more. This portable, manual pipe bender has been made to premium quality and can be fixed to either a frame or bench when in use.
Versatile tube bender for 3 sizes of pipes
- LORESO copper pipe bender is incredibly versatile. Set the tube bender to the size of pipe you are working with, 6, 8 or 10mm, and you’re ready to go! With a 0-180 degree angle adjuster marked clearly on the pipe bender you have a wide range of degrees to work with for every situation.
Works on a wide variety of pipe materials
- Effective for use on brass, aluminum, copper and thin steel pipes, this tube bender really is an all-rounder and an essential piece of kit for all tradesmen.
Manual Tubing Bender for Copper, Brass, Aluminum and Thin Steel Pipes
- MANUAL TUBING AND PIPE BENDER - manufactured with high-quality, heavy duty steel, this tube bender will efficiently bend copper, brass, aluminum and thin steel pipes. This pipe bender provides a fast, economical way to produce angled bends in round tubing
- VERSATILE PIPE BENDER FOR ALL INDUSTRIES - this copper pipe bender is suitable for use on construction sites, plumbing jobs, shipping, manufacturing, heating, decorating or even at garage repair shops
- EASY TO OPERATE – the LORESO manual pipe bender is easy to operate and portable so you can take it from site to site. Made with high precision and premium machining quality, it is a robust tool that is built to last
- VARIOUS DEGREES AVAILABLE – simply adjust the metal bender according to the angle you require from 0-180 degrees. This pipe bender is a 3 in 1 tool and will fit 1/4”, 5/16”, 3/8” (8, 6, 10mm) tubing
Raise shoe handle and open it completely then place tubing in correct size channel, tubing must extend past tubing latch.
Lower shoe handle to align "0" on handle with "0" on form.
Slowly pull shoe handle around form to bend tubing, stop when "0" designation on handle aligns with desired angle on form.
Open handle completely and remove tubing.
3 in 1 Tube Bender
Manual Operation
High Quality
Various Application
Tony Q
September 6, 2025
Easy to use, works as described. Great price.
Customer
July 25, 2025
I used it to make a multitude of bends in a 5/16's copper fuel line for my land cruiser. It worked great.
Vardan
July 23, 2025
It helped to replace my car's brake lines (3/16").Works as described.Bigger than I needed. probably the size of the tool is defined mostly by the larger OD tubes, the bending radius is larger than could be for 3/16". and not easy to start working with it.However, the work is done successfully. Happy with this tool.
Jay Johnson
July 1, 2025
This one didn't break
Brian King
June 3, 2025
Did a brake line on a 66 gto without and problems. Turned out the way I wanted it to.
Paulie Pepper
May 21, 2025
I needed to put a new fuel line on my Triumph TR6. The tubing was not bent to fit, so I had to bend it myself. Knowing that you can ruin tubing if you try to bend by hand I bought this bender. It performed as needed!
Cy W.
May 20, 2025
good copy, wont last.
SuperNova
May 11, 2025
This tool works great if you're using this for its intended purpose. If you try to bend 3/8" stainless steel with a wall thickness of 0.065" you'll snap it into pieces. This is made out of cast aluminum of questionable quality. That being said, if you stick to break lines and tubing that is easier to bend (i.e. copper, copper/nickel, thin stainless) you shouldn't have any problem.Also I picked up the pieces of my broken bender, bolted it to an iron plate, and used a torch to heat the aforementioned stainless tubing orange hot, and it bent very easily. Learn from my mistakes and use heat to your advantage if you want to use this tool for jobs it wasn't built for, it'll save you a ton of money avoiding a $200 tubing bender. Just don't burn yourself.
Craig MacPherson
April 14, 2025
Works as expected, good buy.
Peter Geier
March 25, 2025
Für den Hobbybereich kann man diese Rohrbiege Maschine nehmen.
kenneth
January 27, 2025
Does what it needs to do
Trevor J Anderson
January 12, 2025
Bending copper tube
Dr. LGS
December 21, 2024
Broke on first use with soft copper pipes! Want a refund
Recommended Products