Your cart is empty.
Your cart is empty.The Capri Tools Tubing Bender lets you easily make tight bends on round small-diameter copper, brass, and aluminum tubing such as brake lines. Compatible with tubing with 1/8, 3/16, and 1/4 in. outer diameter. It bends from 0-120 degrees with reference marks at 45 and 90 degrees for accurate bends. Compact design lets you work easily in tight spots and fits in any toolbox.
Michael
August 24, 2025
This bender is a nice size. Gives a nice tight radius, about 1/2" to 5/8". Used for 3/16" NiCopp brakes lines and worked really good. Steel lines take quite a bit more force but doable with my weak hands. I've been happy with all the Capri tools I've purchased.
Jim
August 1, 2025
I just used this to bend some 3/16 brake lines and it works perfectly. It's small enough to work on bends that are close to each other and produces great results. Will a more expensive tool do a better job? Maybe. But as a vehicle owner on a budget, this has the features and practicality I need. You really can't beat it for the price.
aj perry
August 1, 2025
I was sent a used one that someone beat up and put back in the package, but it worked for what i needed....making a very tight radius bend in 3/16 tube. It's a great little tool, light duty. You can destroy it if youre not careful but for the price, i'd buy 2 of them. From a lifetime automotive professional.And yes, i'd much rather have a much better quality tool but in a pinch, it worked great.
Wookieecantina
July 24, 2025
I really like Capri tools, I have quite a few of their pieces in my shop and they've never let me down.I've had some small diameter tubing work as of late and this bender really did the truck.Smooth, easy to handle and make bends, I'm definitely happy to have this in my little shop.I would absolutely recommend this tool.
Customer
July 22, 2025
I used this to make a bend in a 3 inch long line! Worked great for short pieces of brake line!
Customer
July 7, 2025
An inexpensive, easy to use tool that does what it is supposed to do.
Ish
June 23, 2025
First off, i paid too much for what this does around $16. It's impossible to use under the car in close tight area. Copper Nickel pipe is easy to bend with your hands, this tool isn't necessary for my situation. Never even used it because i could not bend under the car. It bends well, is accurate enough but consider another tool if you need to work under your vehicle.
Russell
May 31, 2025
I was skeptical when I received this tool. It was small and light so I didn't expect much. I was happily surprised. It bent the brake lines I was making perfectly. It was definitely worth the money and times.
Jonathan G.
May 3, 2025
I wanted to bend some brass pipe to run some wires through for a project. As such it was important to affect a bend in the pipe that didn’t “crimp†the pipe to the extent that the cable couldn’t be run through it. I bought these as they weren’t overly expensive to see if they’d do what I needed - they did.I should also note that I heated the pipe up with a blow torch before using the pipe benders and bent the tube whilst it was still hot.
readaddict
April 27, 2025
This tube bender works well for bending brake lines. Has good finish well made. It should last for years.
DAVID VALENCIA HIDALGO
March 2, 2025
Lo compre solo por la posibilidad de doblar tubo 1/8, pero es muy práctico y se ha vuelto mi doblatubo principal, para tuberÃa de 1/4 en refrigeradores y neveras.
Carlos
February 14, 2025
Excelente herramienta, pude hacer la lÃnea de frenos de una Escape, la guÃa de grados es muy útil además de su tamaño lo hace una herramienta práctica y útil.
Kerry Jang
February 11, 2025
Works well. Anneal to tube first for best results.
Recommended Products
