Your cart is empty.
Your cart is empty.Product Description
- Construction:Three layers
- Vinyl Size: Width 16 inch, Lenghth 60 inch, Thickness 5.9 mil
- Optically transparent viscous, good heat dissipation transmittance Easy installation, Three Layer Protection and wash cars without problem More than 95% light transmittance; it doesn't affect the original source Scratch resistant, rugged and avoid scratches
Extra size vinyl: 16 in x 60in, any car headlights and taillights can be covered, whether it is a truck or an SUV.
Each roll of car headlight tint vinylcomes with a set of professional installation tools, saving you money.
Each roll of car headlight tint vinyl comes with an sponge stick to prevent the vinyl from being crushed, deformed, and wrinkled during transportation.
- Not pre-cut, you can cut the shape and the size according to your requirement
- Fit Any car or truck, makes your car looks very cool!
- Stretchable with heat gun or hair dryer
- Removable without leaving glue residue behind
- Can be applied to tail lights, headlights, dash, stereos, brake lights, fog lights, side marker lights, bumpers
- Designed to last 5 years outdoors and unlimited indoor exposure
- High temperature resistant and UV protected
- many color can be choose
Nehemiah Williams
2025-09-01 16:59:39
Easy installation. Exceeded my expectations
ROZ3Y
2025-08-08 13:18:35
I love the fact that it came out like the way it shifts colors. During installation, you definenetly need another person to help you.
Heather Russell
2025-08-03 15:52:26
This vinyl tint is rather difficult to work with. There is no air release so working out the bubbles is nearly impossible. Other than it being slightly difficult to work with it has a great color and looks good on headlights if you can get all of the bubbles out and avoid creases.
Chiere
2025-08-01 15:21:26
In August ’24 I got two rolls of Iridescent Clear. Super pretty; a peacock shimmer that color-shifted from teal to purple with hints of gold and pink. I call my truck Bug Eyes. Ok, she’s cuter than bug eyes, but for real, reminds me of bug eyes. I put that stuff on every light she has; headlights, reverse lights, cab brake light, even the little lights on the mirrors. Loved it. Super happy. Get lots of compliments.So I decided to add graphics on the top 5†of the windshield, and ordered another roll of the exact same thing. Used the Order Again function and everything.AND IT DOESN’T MATCH!!! It. Does. NOT. Match!! It’s really pale. Almost actually clear. I thought, well, maybe they sent the wrong thing last time, so as I like what I got in August, I’ll just pick one of the other colors that looks like what I must have gotten first. Went for the green iridescent. And, nope. Doesn’t match. Tried blue iridescent. Also, doesn’t match. Purple? Nope. No way it could be pink or yellow.Now I have 4 or 5 little squares stuck on my windshield, (because I’m hitting up other vendors and brands) asking both family and random strangers which matches the best? So frustrating. If y’all have any ideas or sources I’ll take ‘em.The film itself is a bit difficult to work with. If you have vinyl experience (retired sign maker here, Gerber was my jam,) just toss that right out the window. This stuff doesn’t stretch, flex, bend, or shrink. On the plus side, it doesn’t stretch, flex, bend, or shrink, either. But you don’t need water, and if you have to poke a tiny hole in a bubble it’s no biggie. Just be sure to clean the surface really well. This ain’t gunna hug up around a tiny grain of sand like a high performance vinyl will. You’ll see it.I wrastled with the first lens on my ‘22 RAM 1500, tried starting at one end and steering it to the other, tried starting in the middle and going out, got a few wrinkles that would not smooth out; less than satisfactory results. Did I mention it doesn’t shrink? I ended up seaming the headlight right down the curvest part of the curve. Made an obsessively straight cut, started from there, and squeegeed back. Overlapped about a 16th of an inch, and squeegeed forward. Figured the leading edge of the overlap should not be on the top, facing into on coming rain at 80 mph. Looked amazing. It’s a bit of a pain to work with till you figure it out. Buy extra. Especially if you want it to match. But looks great.It’s also hard to peel off the backing, be perseverant. And don’t forget there’s a clear top sheet to remove too. Wait till after it’s applied. Tho, when I need to do it again I may leave that on. Love bug season’s coming.I just wish I could match it!
Isaac bacon
2025-06-08 21:40:36
But he said did not work at all it didn't want to stick at all and it also Had so many wrinkles that I could not get out no matter what I did do not buy it was so ruined I can even return it waste of money
James
2025-04-29 18:10:27
Product is easy to apply with heat and razor!Light shines lightly lavender through it.Enough to re wrap if damaged from road debris, has survived 50 drive through car washes.
kate
2025-04-28 14:10:57
It didn’t stay on and maybe I had the wrong side on it but it was very unclear what side was right no after how I looked at it. Not gonna buy this again
EDGAR MOLINA
2025-04-08 12:39:58
Â
Dan
2025-04-01 18:32:03
I've had these on my truck's fog lights for several months now and they've held up well.No pitting or peeling.They stand up great to pressure washers and hard off-road use.Could stand to be a touch more orange, but they still look wonderful.Would purchase again.
Scott Bechtel
2025-03-01 14:31:51
Ended up only doing 2 headlights on one car... that's all there was. First one is a bit rough, but learning from that the second came out better. The product did its job, and was as advertised. Takes some skill the wrap properly, definitely a learning curve. Might want to get extra incase the first one doesn't go as planned.
Paul OBrien
2025-02-20 14:36:08
Good value product
Brendan
2025-01-21 14:11:54
Like many others has said, first of all the color is barely colored at all. And then one you get it out of package, the backing plastic on the film was never completely applied to the film, so a bunch of the sticky residue on the film was allready dried up. The film was also allready crinkled inside the packaging allready creating bad "valleys" in the film. When u do find a good piece, this film is very terrible to work with and not forgiving at all as well. Save your money and do not buy this crap.
Ray C
2024-12-27 11:59:31
The product has no adhesion at all. When I peeled back the protective film, it is not even tacky. I intended to use it on an outdoor ( undercover) light to help repel insects, butt there is no adhesion whatsoever. Won't even stick to my finger.
Recommended Products