Your cart is empty.
Your cart is empty.Product Description
UNIVERSAL VEHICLE LAPTOP MOUNT
80% OF USERS THINK LAPTOP MOUNT WILL IMPROVE PRODUCTIVITY
WHY YOU NEED A LAPTOP MOUNT
Diana
2025-08-27 10:06:41
Installation was a bit tricky, but we made it happen. The installation instructions were thorough but a bit confusing for the Wrangler, so we ended up on their website where we found a helpful video.In my case, we had to buy a Torx female socket and use a breaker bar to loosen the very tight seat bolts. We did not remove the bolts, only lifted the seat brackets to slide the mounting plate under. It took my husband and brother-in-law about 20 minutes and a few choice words.When it was finished, everything looked and worked perfectly. I have used it for my laptop and tablet. It is stable and does not rattle. I highly recommend using those lock washers on the top clamps. Be careful not to loosen them too much, as I have already lost a set while inserting my computer. These are needed to eliminate any rattle and keep your computer components secured. It's a Wrangler, enough said.A few drawbacks: once installed, there is no moving the seat to the most forward position (no big deal). The pole components can be easily removed. Fortunately, you can remove the four mounting bolts from the floor plate to remove the half bar, freeing up space for full passenger legroom.Also, the square, plastic edge protectors popped off while tightening and will need to be glued back in place if this is an issue for you. Personally, I don't care since it doesn't affect the purpose.I DO recommend this product and believe it is priced fairly. Thank you.
MMH434
2025-06-12 18:47:32
I’ve tried some of these before and they always were flimsy or took forever to put together. This unit was of high durable metal quality and was very adjustable. We tried it on on a few laptops and they all worked very well. Instructions are with photos that makes it easy to get it installed. We installed it on our Ford F150 2018 lariat. Definitely better than the other ones we’ve tried in the past. All the parts and tools required are included. The only thing you have to do is loosen. The two front seat mount bolts, which will vary based on your unit simple ratchet will take care of that for you. Highly recommended.
Eric
2025-05-21 14:54:47
I bought this for my 2023 Ram. Had some issue choosing the correct seat mount but now that it’s installed it works great. May have a bit more movement than more expensive brands but I would purchase again
Richard W Dajani
2025-05-18 17:50:42
I finally got the time to install the computer stand and of course I waited too long to install it so I can’t send it back, the collar that holds the main support steady was already broken or somehow got broken during the installation process. Very cheap material.
Gary Lytle
2025-04-20 10:48:27
Good product
John P Danh
2025-04-17 13:51:08
The mounting bracket did not fit my truck. I have a 2018 Silverado and the bolts to the passenger seat are too far back. I ended up drilling holes into my floor and mounting the stand directly to my floorboard. A little scketchy but it’s holding pretty tight right now. I had to buy longer bolts as well.
Alan Reed
2025-04-11 16:52:59
It's solid, doesn't shake or bounce around in my patrol car, with laptop on it.
shane walker
2025-04-05 13:39:30
Fir right in my 2008 gmc sierra 2500.
Diana
2025-03-26 17:47:28
Installation was a bit tricky, but we made it happen. The installation instructions were thorough but a bit confusing for the Wrangler, so we ended up on their website where we found a helpful video.In my case, we had to buy a Torx female socket and use a breaker bar to loosen the very tight seat bolts. We did not remove the bolts, only lifted the seat brackets to slide the mounting plate under. It took my husband and brother-in-law about 20 minutes and a few choice words.When it was finished, everything looked and worked perfectly. I have used it for my laptop and tablet. It is stable and does not rattle. I highly recommend using those lock washers on the top clamps. Be careful not to loosen them too much, as I have already lost a set while inserting my computer. These are needed to eliminate any rattle and keep your computer components secured. It's a Wrangler, enough said.A few drawbacks: once installed, there is no moving the seat to the most forward position (no big deal). The pole components can be easily removed. Fortunately, you can remove the four mounting bolts from the floor plate to remove the half bar, freeing up space for full passenger legroom.Also, the square, plastic edge protectors popped off while tightening and will need to be glued back in place if this is an issue for you. Personally, I don't care since it doesn't affect the purpose.I DO recommend this product and believe it is priced fairly. Thank you.
MMH434
2025-03-13 10:22:03
I’ve tried some of these before and they always were flimsy or took forever to put together. This unit was of high durable metal quality and was very adjustable. We tried it on on a few laptops and they all worked very well. Instructions are with photos that makes it easy to get it installed. We installed it on our Ford F150 2018 lariat. Definitely better than the other ones we’ve tried in the past. All the parts and tools required are included. The only thing you have to do is loosen. The two front seat mount bolts, which will vary based on your unit simple ratchet will take care of that for you. Highly recommended.
Eric
2025-03-10 16:06:24
I bought this for my 2023 Ram. Had some issue choosing the correct seat mount but now that it’s installed it works great. May have a bit more movement than more expensive brands but I would purchase again
Richard W Dajani
2025-03-01 16:36:58
I finally got the time to install the computer stand and of course I waited too long to install it so I can’t send it back, the collar that holds the main support steady was already broken or somehow got broken during the installation process. Very cheap material.
Gary Lytle
2025-02-26 13:50:22
Good product
John P Danh
2025-02-25 18:46:52
The mounting bracket did not fit my truck. I have a 2018 Silverado and the bolts to the passenger seat are too far back. I ended up drilling holes into my floor and mounting the stand directly to my floorboard. A little scketchy but it’s holding pretty tight right now. I had to buy longer bolts as well.
Alan Reed
2025-02-23 17:26:56
It's solid, doesn't shake or bounce around in my patrol car, with laptop on it.
shane walker
2024-12-18 16:05:58
Fir right in my 2008 gmc sierra 2500.
Recommended Products