Your cart is empty.
Your cart is empty.
Mesee 1/2-20UNF Keyless 2-13mm Capacity 3-Jaw Drill Chuck with SDS Plus Shank Adaptor Fit Rotary Hammer and Hammer Drill, Clamping Bits from 1/16 Inch to 1/2 Inch
- Constructed with high-quality chrome‑vanadium steel and carbon steel, ultra-durable construction meets the demands of frequent use.
- Classic 3 Jaw chuck with great clamping force, effectively preventing drill bits from loose, more reliable.
- Unique thrust bearing, the torque applied to the handle is easy to translate into a larger gripping force.
- Radial locking to prevent unwanted release of the tool when running in a clockwise and counter-clockwise direction.
- Quick-change SDS shank designed for electric hammer/ rotary hammer, fast and easy change for different drilling jobs, suitable for rotary hammers of all brands with SDS-plus chuck.
- Keyless chuck finger-tightens could quickly change drill & driver bits, allowing you to quickly and easily swap bits into and out of the chuck by hand, easily move from bit to bit, and task to task.
▶Specifications:
Material: Chrome‑Vanadium Steel & Carbon Steel
Clamping Range: 2-13mm(1/16 inch - 1/2 inch)
Shank Type: SDS-Plus Shank
Mount Thread: 1/2-20UNF
▶Please Notice:
- This product can NOT be used counterclockwise!
- Please allow 1-3mm errors due to manual measurement.
- Prevent scraps from flying at work, please use safety glasses and gloves.
▶Package Includes:
1 x SDS Keyless Chuck Adapter
Benito M
2025-08-22 15:44:14
Not sure why so many negative reviews. It went on super easy and it seems sturdier and better built then what was originally on my Milwaukee drill. Functions exactly as the original at a fraction of the cost.
Ryan
2025-08-15 13:02:13
For the people who have a rotary hammer drill, but not a regular hammer drill.
buy more stuff
2025-08-08 15:52:19
This adapter makes an sds driver usable with other bits. Tightening the adapter on a bit results in a click when you've reached the limit and it won't tighten any further. Read other reviews about the adapter breaking quickly. Comparing this to a famous brand sds adapter the famous brand emphasizes that it is only for non hammer uses. It seems reasonable that the same would apply to this adapter, the added stress of hammer drilling will likely shorten the life of this adapter. Another point is that this should only be used in the clockwise rotation. From the exploded diagram in the product listing the adapter shaft is threaded into the body and might loosen if used in the counterclockwise direction. If it does come loose you should be able to reattach it. With these limitations it could allow more uses from your sds tool at a lower price than better known brands.
Joseph C.
2025-07-24 14:28:08
Works well, as advertised, seems like to good quality
Thomas Mcintire
2025-07-20 12:09:24
On only the 10th hole (with a 1/2 inch bit) which this was used for on a hammer drill, it failed, falling apart. I expected far more than this out of it since it was made to use in a hammer drill.Do not buy...
Dennis E
2025-06-26 14:07:22
This has been great. Thanks!
Joe Cagle
2025-06-07 10:44:05
Great product at great price.
Who am i
2025-04-20 15:29:31
It's ok I guess. Better than cheap plastic one that was on drill but lock nut stripped and metal casing not heavy duty to say the least. Very light and cheap paint that fades quickly.
Nathalie 64
2025-04-17 13:28:18
Remplacement sur perceuse McKenzie, pas de soucis
M Attrill
2025-03-12 10:26:13
Fitted into a bosch sds drill no problem, and works as it should. Being keyless makes it easier to change bits.
John
2025-01-29 16:22:16
It is what it says it is on the tin all is good
Dumitru
2025-01-26 12:16:40
Is very good
Recommended Products
