Your cart is empty.
Your cart is empty.
This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.
Features:
Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).
Aluminum alloy base.
Gear drive without belt design, power strong.
Power-off switch for added safety.
Can be widely used model, wood boards, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling. This is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.
Specifications:
Plug: US (optional)
Spindle Speed: 0-2800r/min
Drill Clamping Diameter: 1-13mm / 0.04-0.51in
Input Power: 710W
Spindle Travel: 60mm / 2.36in
Voltage: 110-220V, 50-60Hz
Drill Capacity: Woods: Ï30mm
Iron: Ï8mm
Working Radius: 110mm / 4.33in
Material: aluminum alloy
Item Weight: 6000g / 12.22b
Package Weight: 6100g / 12.36lb
Package Size: 480 * 290 * 150mm / 18.90 * 11.42 * 5.91in
Note:
Please allow 10-30mm error due to manual measurement and make sure you do not mind before ordering.
The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding.
Package List:
1 * Bench Drill
1 * English Manual
D. K. Willis
September 4, 2025
This is the No. 5156E model with a US 110V 3-prone plug. It is a fine tool at a more than reasonable price. I was very surprised at the build quality; other than a few sharp places on unfinished bottom of the drill table (fingers beware!) it is well- built and finished. The feed mechanism is tight and smooth. It drills accurate holes with no chuck wobble. The speed adjustment wheel (rheostat?) works well. It requires two carbon brushes for the motor (installed) and includes two spare brushes (manual says to check brushes after 50 hours of use). Direct drive mechanism (no belts required). I purchased it specifically for a hobby project where I needed to drill a number of accurate #43 holes in 3/16th (5mm) round soft-wood stock. It worked like a charm.
Customer
September 3, 2025
I gave away my 10" cast iron bench top drill press because it was too heavy and awkward to move around and I didn't want to permanently mount it to my bench or build a cart for it. It also didn't drill that accurately.This is the perfect new drill press for me. It is very light weight with a compact design (no motor off the back) so I can store it on a shelf under my bench and easily lift it out to use. It has almost the same drilling capacity as my 10" drill press, which is remarkable. I've used it on several projects not and it drills perfect holes--very accurate!! I built a little table onto it's base so it can be clamped down to my workbench and I can add fences, etc. The photos show the base I built and it drilling out 1-1/2 in. holes with a forstner bit for a router plate template I was making. Also, the the head can be spun around 180 degrees and clamped to the column to drill perpendicular into other surfaces (like a work bench, for example). I've also used it to install perfectly perpendicular threaded inserts. It works so much better than all the other "portable" drill presses on the market, including the ones you attach your own drill to.
BruceC
August 25, 2025
Despite the terrible users manual I like this drill. Haven’t used it a lot but appears to be well made
Customer
August 4, 2025
First the negative. It shipped without the chuck key and the spare carbon brushes. I contacted the support link as given by Amazon and there was a quick reply asking for a picture. I sent the picture of the box and the link to the product on Amazon. Got back a response this evening which “Sorry boss, not my product†so buyer beware.On the positive side: It’s light, infinitely variable in speed and made short work of drilling through 3mm stainless steel with a cobalt drill bit. Needless to say the bit needs to be cooled with a cutting fluid. I used Anchorlube which you can get here on Amazon as well.It’s solid, well made and great value for the price.Given the lack of support from the supposed seller and Amazon and this particular model shows up from multiple sellers as well as on Alibaba, if it conks out and the brushes wear out, not obvious where or how to get spare parts. But as a little used machine which can be taken apart and occupies little space, it well worth acquiring.The two stars taken off are for bad support.
A Bierce
July 18, 2025
I got this drill press after trying a small, high rpm hobby drill press (no power, wrecks bits), as well as 30 lb bench drill press (wobbled). Specifically, I got it to drill out brass rivets on small Swiss Army Knives. The flat rivet head is about 2.5 mm in diameter, so a precision machine, without play or wobble, is needed. This press did the job. The operating handle is heavily spring loaded which detracts from the otherwise precision impression.This is a real drill, geared, and showed zero rpm drop under (the admittedly small) load. The speed control works fine. One reviewer wrote that they only got 1500 rpm. I found the rpm perfectly adequate. I know this because at the maximum speed it’s screaming like a banshee. The unit is marked 110 volt, 50 hertz 710 watts. This is not a perfect alignment with our US 120 volt, 60 hertz system, but in my usage, it worked fine.The press had no play at the chuck. The slide is adjustable but had no play when received. It appears the adjustability is via Allen screws and a bronze slider.The sound of the press is tolerable. It’s like a precise sounding whine (no doubt the gearbox) increasing with rpm. I’m living in a mobile home now, but I would have used it with caution when I was in the apartment. Low rpm, nonferrous metals, should be no problem. Screaming away on a quarter inch thick piece of steel may be a problem. So, for the price, it works very well. Why get a hobby low power, high rpm press when this press can handle the precision work and at the same time deal with heavier jobs?
steve
July 5, 2025
Does what it should. Lots of power for a very compact press. Sturdy build with no slop or play anywhere. I built a small work table and mounting board to easily clamp it where needed. Can't beat the design and value.
Summer16
April 29, 2025
I'm a woodworking enthusiast, and I like to do some DIY creation. This small bench drilling machine has brought great help to my creation.Generally speaking, this small machine has strong power,This is good kit! Very well made. The base is very solid and heavy enough to make a stable platform. The actual drill has plenty of power;Two spare brushes are included. Chuck is very good quality. The press mechanism is smooth, very positive with good depth of movement. A useful handle at the back of the main unit makes it easy to pick up and carry. The finish is excellent with the exception of the two arms on the clamps at the rear; just a little better finish here would be in keeping with the rest of the drill but that is really a minor issue. Overall an excellent purchase, I am most pleased.
reservedebois
April 19, 2025
Appareil qui semble rencontrer les criteres de qualité vs prix. Nous testerons bientot mais globalement ca semble tres bien.
Donald Dupont
March 30, 2025
Tres bien,
Mike P
March 1, 2025
Works nice as it should. I use it for drilling a variety of spade bits into hard wood for railings. If the bits are sharp there are no issues. It can bog down if you push it. Only issue I had was the depth stop. I replaced it with metal instead of the provided plastic piece.
Shashi C.
February 20, 2025
Since l reside in a townhouse complex the drill noice is quite load,l immediately packed it up and returned it.I had a Wen 8" drill and it was extremely quite, unfortunately l sold it.Having said that there are quite a bit of good reviews which made me buy this, so don't just take mine to determine buying,after all it's all about preferences.
Rolando Garcia
February 1, 2025
Un poco más ruido del que esperaba, pero funciona de maravilla
Recommended Products
