Your cart is empty.
Your cart is empty.Product Description
Package includes:
1 x Carburetor
3 x main jet
1 x pilot jet
1 x 48mm air filter
1 x Insulation mat
1x Paper pad
1 x Fuel Filters
Specification:
Color: As Pictures
Material:Aluminum Alloy
Suitable for 110cc~130cc engines
Carburetor Specifications
Material: Aluminum alloy
Flange: 48mm Bolt Center
Spigot: 22mm
Intake: 46mm
Height: 141mm
Width: 88mm
Compatible with
YAMAHA
HONDA
SUZUKI
KAWASAKI
Apollo
SSR
KTM
Air Filter Specifications
Color: red
Type: clip angle
Material: non-woven/aluminum alloy/rubber
Size: 48mm
Replacement
ATV/UTV Mini Bike Dirt Bike Pit Bike CG125/CG150 Mower Go karts Scooter Moped.
- ATV/UTV
- Dirt Bike
- Retro Bike
- Scooter
KomptonWest
2025-08-27 17:35:47
The 22mm carb is a great replacement for an SSR 125. Worked with the pre installed jets but did require some tuning. Fits great and looks great.
Leigh Oswald
2025-08-13 14:56:28
Bolted right up to my Hawk 250 (did not need to change the intakemanifold, the stock one works). You need to cut the tube from the airbox to get the cone filter to fit though. Instant improved throttle response and reliability. The stock carb is a POS.I dont have much experience with carbs but this one ran fine out the box with stock jets. Elevation here is about 650ft above sea level. The throttle cable is kind of a pain but once you theres it, it's fine. Dont forget to put the gaskets between the carb and manifold!I used blue loctite there. Great value and reliability from nibbi.
KC
2025-07-22 12:52:01
Let me say this, I'm using this carb on a 125cc TaoTao atv. I have two. One for each daughter. And I've been replacing the carbs since the day I baught the bikes brand new in 2021. I've always replaced the carb with the same one it came with because clearly I didn't know better lol. The original carb wood have idle issues, and stall, I mean it was horrible, and they was all like that everytime I replaced it. THIS carb was much more expensive as I paid $52 and the original one was $15 but holy macro!! MASSIVE DIFFEENCW!! I didn't have to play with the idle adjustment at all, I sis have to make some small adjustments for it to fit in my daughter's bike but easy things like raise the neck up with the plastic gasket that came with the kit. The carb manifold pipe, I needed to lift it so the carb would sit higher then the starter. (otherwise it wouldn't fit) but once I got it on, it starts INSTANTLY (before the engine would turn over 10-15 tines before it finally started) now it turns literally like half a turn and instastart! Lol I love it!! It's superrrrr smoooooth idle and performance. It's quieter too. And when it idles it doesn't go high and low when I put it in gear. This carb is seriously a life saver, I wish I baught it two years ago.
Trevor M Johnson
2025-07-07 12:04:16
The carb functioned properly out of the box no leaks, wish they made smaller jets for it though. It's easy to adjust, easier then the stock version. Looks good too. Everything that came with it besides the jets are cheap and I wouldn't trust them to last. Installation took a little ingenuity but the supplied bolts and plate came in handy.
Michael Eggen
2025-06-17 15:50:23
Worked great easily adjustable
Lucas
2025-05-23 18:31:23
Worked good right away. Perfect upgrade on my SSR 110
Wwelk
2025-05-21 10:29:29
Carb is very well built , don't feel cheap and works well. We put it on my sons SSR 125 dirt bike and just had to fine tune it to his engine so was just a matter of trying different jets.I'd give it 5 stars as far as quality goes but this carb was supposed to come with extra Jets to fine tune it and there was none , I did email the company but never heard anything back so I bought some Nibbi Comptiable jets off Amazon here that worked good. If Nibbi Emails me back and sends me the extra ones ill change my review but once again the product is solid , just not good customer service because they should have got back to me and sent me the extra jets it was supposed to have.
Kyle
2025-04-22 15:28:33
The media could not be loaded.
moe
2025-04-03 11:06:33
I've always spent money on $20 carbs and fought to make them work well...Well I finally spent decent money for a real carb and I don't regret it. Other than a main jet change this was a huge upgrade for my xr70r. I highly suggest
Sebastien dostie
2025-03-19 13:40:40
Parfait
DC
2025-02-26 17:05:51
This carb just made a huge difference to a little 110cc atv…. This product arrived on time, had a great build quality. Combined with a modified exhaust system…. This is no longer a putt putt around the yard machine…. A bit of work to set it and the clearances were tight to get it to fit, But I’m glad I bought this… hours of fun to come with this setup…. thank you Nibbi for a great carb!!
Scott
2025-02-18 17:35:24
Installed this 19 mm carb on my Honda Ct70 with the 88 cc big Bore kit added On my engine starts pretty much first kick once engines warmed up works like a charm
Pierre-olivier L.
2025-02-11 17:38:10
Easy installation and my dirtbike never been so smooth to ride! I install this carburetor on a YX150cc engine to remplace a YOUALL carburetor.
Recommended Products