Your cart is empty.
Your cart is empty.The OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Set is your go-to solution for efficiently servicing wheel hubs and bearings. This comprehensive wheel bearing press kit fits most Domestic, European, and Asian vehicles, making it an essential tool for any automotive professional. With its self-centering design, the kit ensures precision during use, minimizing the risk of component damage. Designed for on-vehicle use, this wheel bearing press tool saves you time by eliminating the need for a hydraulic press. The kit includes adapter shoes, pusher washers, receiver sleeves, a nut-bolt, and a heavy-duty bearing, covering all your hub and bearing service needs. Whether you're working on a front wheel bearing press, rear hub removal, or all-wheel drive systems, this bearing removal tool kit delivers reliable performance. The heavy-duty thrust bearing reduces effort, extending the life of the tool and ensuring long-lasting durability. Optimize your workflow with this versatile hub bearing removal tool, built to handle the toughest jobs with ease.
Angela K Plager
August 23, 2025
Removed and install wheel bearings and hubs on Honda S2000. Recommend a 27mm box wrench and 24mm socket with breaker bar for use with this tool. (See photo of hub install for illustration) Relatively straightforward instructions that took little time to choose the correct parts of the tool to assemble in the right order to perform the different operations. Worked to remove the hubs and the wheel bearing without any issue. Having a large 27mm wrench for the back screw and a long breaker bar for the 24 mm socket to break the parts free made it possible to apply plenty of leverage/torque. Did not resort to impact or power tools as the manufacturer specifies. Install was smooth and encountered no issues overall.
Nick Lantzy
July 31, 2025
I needed to do a rear wheel bearing on my 2000 Porsche Boxster. I was told to purchase a SIR Hub removal tool with an MSRP of over $1,000! Considering paying a mechanic for the job would only be $900 I started looking for other options. This hub removal tool worked perfectly and now I have one less job on my maintenance to-do list.
Customer
July 30, 2025
I was very much looking forward to having this kit to use for future repairs, but it did not hold up at all. After just a single use, the adapter plate bent. I used it according to the directions. I did not use an impact, or misuse it in any other way. So far every tool I have bought from OEM has either been defective in the package, or just did not hold up to even light use. I will not be buying from them again.
James R.
July 17, 2025
I was working on a 2004 Toyota Sequoia 2wd front wheel bearing. been working a vehicles for 38 years professionally. This was one of the toughest wheel bearing I've ever replaced. The hub was very tight. It bent the lock ring when removing. had to hammer on the hub even with the tool installed. But it finally came out. Due to the size of the bearing, it does not have a large enough cup to properly fit the back of the spindle to correctly push the hub back into the new bearing. But like most shops, I have several different bearing tools and had the correct size setup I needed in another kit.
Michael D.
July 15, 2025
I bought this tool because I borrowed it a lot at my last shop and it's a time saver and as a mechanic your time is important and this tool gets the job done with ease, I highly recommend it!
Brian Alan Brackney
June 25, 2025
The unit works just as described and shown in OEM Tools videos. Working on my 2003 Toyota Camry, the tool made removal and installation of the press-fit hub and wheel bearings an easy job. However, this required using an impact wrench to turn the jackscrew, just as was shown in the videos. The problem is that the instructions that came with the unit expressly state that pneumatic tools are NOT to be used. The reason for this is that the provided thrust bearing for the jackscrew is drastically inadequate for these loads.Per instructions, I lubricated the jackscrew with high-pressure grease before use. However, there were no provisions for similarly lubricating the thrust bearing, so I used WD-40 as was shown in the videos. I lubricated the bearing each time before applying force with the tool, but this was insufficient. By the time I was pressing in the hub, there ware metal particles in the oil drops coming out of the thrust bearing: A clear indication of bearing failure after servicing only one wheel.If used as shown in the videos, the thrust bearing will likely last for only one full service, including both right and left wheel bearings. After this, the bearing will need to be replaced. This was also noted in several reviews of the virtually identical OEM Tools Part #27213. On balance, the rest of the hardware is top-notch and should last indefinitely given proper use and maintenance.In summary: An absolutely great tool with a glaring, single point of failure. The unit will do the intended job quite well but expect to almost immediately purchase a new, substantially upgraded thrust bearing for continued use. The alternative is to remove the thrust bearing altogether and replace it with a small hand-held hydraulic press such as those used for hole punches.
Customer
June 13, 2025
Product works well and gets the job done on the car.
Jonathan E.
May 15, 2025
Does not pull bearings, tool bent while attempting bearing removal. Does a great job of installing, which a bolt and washers can do for 1/100th of the cost.
juan manuel
March 31, 2025
Cómo es de esperarse laMarca de herramientas es de primera , lástima que meLlego sin un broche en elPortafolio que los almacena
Customer
February 27, 2025
Excellent productshipped perfectly nothing brokenWill use it immediatelyWorks perfect on Audi TT MK1 1998 - 2005 New Beetle
RodSal
January 28, 2025
The media could not be loaded.
Bill Marsh
January 15, 2025
The tools are great but the kit latches are broken will be looking to return tool
Recommended Products
$57.99
$ 28 .99 $28.99