Your cart is empty.
Your cart is empty.Omix offers a wide selection of steering and suspension components to keep your Jeep safely on the road with quality that always meets or exceeds that of the original. This replacement power steering pitman arm fits 97-06 Wrangler TJ models. Replaces OE 52038337
Steyn v.
2025-08-06 11:21:19
Worked great with my MC 3.5†lifted TJ. I needed a stock height pitman arm after some genius had installed a dropped one. Going back to stock fixed my bump-steer issues. Make sure your track bar and drag link run paralel / on the same plane after lifting your Jeep.
Ryan L.
2025-07-28 11:57:44
Fits as advertised. The splines fit on the steering shaft bit tight at first so you should expect to exert some effort getting the pinion nut to seat properly and securely. I think I torqued the nut to almost 250 ft/lb to get it adequately seated.
Mike
2025-07-20 21:45:24
Good quality pitman arm, I mean, it's just a pitman arm. For those that are ocd like myself and noticed that this one does not go on the spline high enough, that's normal as this has less of a taper than others. You will likely not see multiple threads showing and the nut will be pretty flush with this omix brand. Be sure it's torqued and the lock washer is on and it will be fine.
Shawn Kelley
2025-07-05 17:32:49
Good fit not an easy install.
rzxn30
2025-07-04 11:08:09
I have a 98 TJ with a 4" lift and when that lift was put on, they added a drop pitman arm. As the jeep is older, I recently replaced the steering and right after I felt the death wobble I had not dealt with in 15 years. The drop pitman arm did not seem to work with my new steering so I replaced it with this OEM style one. So far so good, no more wobble and the steering is good.
Raymond
2025-06-12 18:11:23
Not much to say really... It's a pitman arm. Had to get a new one when I replaced the steering box on my 1998 Wrangler, since getting the old one off of the old box was impossible. Probably better that I got a new one anyway. 4WD Hardware shipped quickly, and I had it in 3 days. Price was right. No complaints here!
G. Randolph
2025-05-19 17:39:22
After lifting my 2000 TJ 5.5" I installed the provided pitman drop. After the lift steering was a problem, I had a lot of bump steer and when accelerating or decelerating the steering wheel pulled from one site to the other. I changed the drop pitman with this one and it fixed my steering problems. It is heavy duty and appears to closely match the factory one. I have not had any problems with it
Nascarnick
2025-04-26 17:03:47
Surprised how often people install dropped pitman arms on lifted Wranglers. My TJ had a drop with a 4" lift and it was definitely not necessary. Make sure your track bar and your drag link are parallel and travelling through the same arc. Installed this arm to replace the dropped pitman arm and it make a very positive difference. Didn't realize how much bump steer there was until I replaced it.
nick williams
2025-04-12 09:34:05
When my lift was installed someone put a drop pitman arm on and we’ll… death wobble!! It has been in-drivable above 50km/h. Did some reading and sounded like stock pitman arm was the way to go. I don’t have it because I didn’t do the lift. Bought this one and slapped it on tonight and did 110km/h for a half hr and not a single shake. This is a perfect replacement when you need to have that factory pitman arm!!
wizbone
2025-03-26 17:16:01
Dimensions that matter all appear to match my factory unit. If you can see this review, it went on fine. (Or I'm a corpse under my Jeep)
Sonny
2025-03-04 11:00:33
Good price. Fits 98-06 Jeep tj
Dave
2025-02-12 14:28:48
Works like it should
Michael C.
2025-01-21 12:30:55
Part is defective and not usable
Recommended Products
