Your cart is empty.
Your cart is empty.Product Description
Removing the pilot bearings and bushings from the clutch flywheel doesn’t have to be a battle between you and your engine. The heavy duty 1-1/2” fingers of the pilot bearing puller grab tight to the bearing, making it easy to turn the center screw until the bearing comes loose from the flywheel. Included handle helps you keep the puller steady as you tighten down the screw. Strong and dependable enough to last a lifetime.
Kit Services: Most foreign and domestic vehicles
Any specialty tool will help make an automotive repair or maintenance task easier, but Powerbuilt automotive installer tools take the concept of ‘help’ a big step further. It starts with the storage case – heavy duty design ensures it will stand up to years of use and abuse. Inside the case lid you’ll find how to instructions and photos that show step-by-step usage instructions.
Set includes
- Puller Assembly
- Center Bolt
- Finger Nut and Bolt
- 1-1/2" Fingers
- Storage Case
Casey
2025-09-06 13:35:19
It worked as advertised and removed the stuck pilot bearing out of the manual transmission. It took a couple of tries, but that had more to do with me than the tool.
Brian
2025-08-31 12:19:14
I like the simple tool design and tools overall construction is ok. The problem is the tool dose NOT pull the bearing. The tool becomes this spring loaded danger when the bearing does not move as the tools arms are wedged inside the bearing. The tool will then jump wildly once the arms are pulled from the bearing (the only way to remove the tool). The reason I gave it one star, is I was able to get the arms to stay hooked by finding an item to fill the space between the arms while in the bearing (a large screwdriver blade). The bottom line is the tool does not work because the hook arms (believed aluminum) flex in and unhook when the pulling force is applied to pull the bearing.
Ilplumber1
2025-08-26 15:53:38
Tool showed up quick and worked perfectly
cera.ce
2025-08-14 16:29:07
I needed to file a sharper ledge into the prongs that latch on the bearing so that they could grab the lip of the bearing more securely.Other than that, it works very well for removing the pilot bearing. Easy, controlled removal on the first and only attempt.Putting the new pilot bearing in took way longer than removing the old one out.
Customer
2025-07-13 17:40:02
The tool is not bad for the price, but it did take some modifications to make it work.The teeth that hold the pilot bearing were shallow and round and did not grip whatsoever. I had to reshape them with a file, and once I did, it worked like a charm.
andymidplains
2025-07-06 11:32:35
This is a well made tool in a nice, tough little storage case. The Amazon price for identical or functionally similar tools from other sources was much better. Important note: The tool's puller arms (as it comes out of the box) slide on the inside of the pilot bearing and do not function properly. You can see the arms flex inward when you start to apply pressure. Be sure to take a file that cuts a 90 degree notch and create a small flat surface on the outside of the arms. This flat surface will catch the back of the pilot bearing and the tool will then work as designed. If the notch is too deep you could weaken the arms.
mayne Martina
2025-06-30 15:18:31
Good quality
SMILES
2025-05-29 15:44:32
I tried several times. DID NOT WORK. Tore up the bearing pretty good though. Very DISAPPOINTED. The Hooks are too rounded & not tall enough, It just would not grip. Finally purchased a OEM puller for the slide hammer, Worked like a charm.
Adolfo
2025-04-04 16:00:03
Me gustó que viene en su estuche y lo ocupe para extraer un buje
jmhm2003
2025-03-19 13:34:04
I bought this to pull out a pilot bearing on a Honda K series. Worked perfect, BUT, I did have to grind the tips a bit finer to get it to grab. Also pulled various pressed on bearings from main/counter shaft with it. Very happy, excellent product.
Abraham Camacho RamÃrez
2025-02-19 10:15:26
Es un extractor muy robusto, fácil de manejar y hasta ahora muy efectivo. El estuche es un buen extra, ya que también es resistente
Adonny Sotorrio
2025-02-09 16:20:04
Very good quality product.Very satisfied.
BAKKU
2025-02-04 21:38:25
La pieza lelgo completa pero no me sirvio para quitar el buje piloto, las patitas no agarran firmenemente el buje a pesar de apretar correctamente y usarlo como lo indica el manual. El material se dobla, no lo recomiendo.
Recommended Products