Your cart is empty.
Your cart is empty.
Liftgate Tailgate Lock Latch Actuator Restores the ease and convenience of remotely locking or unlocking your vehicle's tailgate. The actuator returns the power tailgate lock to proper operation and the robust plastic housing helps protect it from damage for year after year of service.
Condition: 100% Brand New and tested prior to leaving the factory.
High Quality: Built to strict quality control standards, high quality OEM replacement part
Package Contents: 1 * Rear Liftgate Door Lock Actuator
Quality Guarantee: 24-Month Warranty
Replaces Part Numbers:
- 9L8Z7843150B
- 937-663
- 9L8Z-7843150-B
- 9L8Z7843150A
Compatible with Following Vehicles:
- 2009 2010 2011 2012 Ford Escape Trunk Tailgate Liftgate Lock Actuator
- 2008 2009 2010 2011 Mazda Tribute Trunk Tailgate Liftgate Lock Actuator
- 2009 2010 2011 Mercury Mariner Trunk Tailgate Liftgate Lock Actuator
Mook
2025-08-30 17:59:11
Fit perfectly, took 10 minutes and 1 Philips screwdriver to install, looks the same quality of part that came off the car if not better quality, great price, works without effort
Scott S
2025-08-21 11:13:02
I replaced the original latch on my 2012 Ford Escape with this part. First let me say, to my surprise, this part was far superior in quality compared to the original. The latch itself on the original was plastic. The replacement has a metal latch. It’s not hard to guess which will last longer. The electric plugs plugged in easily and securely. I am definitely impressed with the value for the money with this part. Overall, the installation was fast and easy. One recommendation is to open your rear glass when reinstalling the plastic cover panel on the inside of the hatch. It provides better clearance with the rear window defogger. Buy with confidence.
Behind These Hazel Eyes
2025-07-12 14:41:11
Needed this for longer than I care to admit. Works fine. Work suv 2010 ford escape xlt. My friend installed it in less than an hour. Working great. Thanks
mo
2025-06-20 16:48:09
Well made and seems to be holding up great! Super easy to install and gets the job done
EB
2025-04-27 13:38:17
The actual install took about 5 minutes. Getting the broken rusted actuator off took about 45 minutes. Since the tailgate would not open, had to get to the actuator through the tailgate window by pulling back the plastic panel and squeezing my arm between the panel and liftgate and pulling up on the actuator which was completely rusted. You would think that the tailgate had not been opened for a year but I use it every day. Once and thankfully the tailgate was open, the bottom screws on the plastic panel were rusted and the 3 torx screws holding the actuator were really rusted. You will need a 26 torx bit to get these screws out. After several attempts of WD-40 and hoping that I would not strip the screws, they all finally came out. The new part fit perfectly and as said before, it took all of 5 minutes to install the new actuator and replace the plastic panel. the tailgate works as good as new!
Diane Kurth
2025-04-04 15:30:07
Fast and described correctly
brandon t.
2025-03-02 16:58:52
Works great
JUCACI
2025-01-26 15:20:02
Excelente
Gary W.
2025-01-21 13:17:04
Purchased for a 2010 Mazda Tribute. Product code matched my unit. All you need is a Torx #27 bit. Three Torx screws are visible at bottom of hatch when you open it. You will need to unclip the plastic paneling (paneling is held on by clips inside) on the inside of the hatch in order to remove old latch. Unplug the 2 power plugs and remove the latch. To install new tailgate hatch I recommend using a bit of Blue (medium) loctite on the screws. I also always use dielectric grease when attaching plugs and bulbs for that matter. But not a problem if you don't have any. Before closing hatch I recommend locking and unlocking the doors with your remote to ensure its working properly. You should be able to hear the latch working. I recommend this product. Cheers; Gary.
Carlos Canez
2024-12-17 18:36:02
Excelente producto, funciono a la perfeccion, encaje perfecto
Sandro D
2024-12-14 17:56:11
This actuator is obviously a weak part of the Ford design so it needs to be replaced more than once in the life of the vehicle. This is probably about a third if not a quarter of the price of getting it from the dealership and it works just as well I would buy again from this vendor.
Luis fernando Méndez
2024-12-07 17:30:57
Cumple con lo que dice y es muy fácil de cambiar
Customer
2024-12-03 13:58:31
Easy to install, exact fit and high quality
Recommended Products
