Your cart is empty.
Your cart is empty.RELIANCE WATER HEATER CO 9007884005 Honey Electronic Gas Valve
Mohamed omar
August 4, 2025
Arrive on time and works great.Thanks
Miguel Hipolito
July 31, 2025
I arrived in the stated arrival date. It was very easy to install. A simple video on YouTube gave instructions clearly. Replacing this particular part required very little that even a 5th grader can change it. As a landlord who has had to replace entire Water Heaters in the past and the incurred cost having to purchase a brand new Water Heater at $700 due to damage or wear intear for the same main part. This item was only $134 saving me over $600 dollars. I strongly recommend to any landlord to search everything on Amazon for your home and appliance parts.
Ana
June 15, 2025
Purchased this item for water heater and it doesn’t work. I can’t return defective Item as it is misclassified as non refundable when there is no hazardous material on it when new for shipment. Water is non hazardous. Buyers beware as seller doesn’t refund item if it doesn’t work.
Anthony
May 16, 2025
My water heater is about 13 years old but it still looks brand new. It started acting up on me and would not stay on. Pilot light was on and I reset the control valve by turning it off and then back on again. It would fire up but the light on the valve kept blinking 5 times saying it was the temperature sensor failure. I looked up videos on YouTube on diagnosing the issue and finding out how to swap out the control valve hoping that was the problem. I ordered this valve and it arrived in about 2 days. I removed the old valve and replaced it with this one and it fired up right away. It has been working perfect ever since.
Shawn McKellar
March 29, 2025
Ordered on a Friday. I was sent a message that I would receive on Sunday. However, I received another message on Sunday saying the order was delayed and to expect delivery within one to two days. That made me a little perturbed because I pay for Prime and expect my orders within two days, I had also been without hot water for the entire weekend. Amazon needs to fix the shipping issue quickly.As far as the part goes. I had to drain water heater below level of this part which took a little while. Once I got that drained, the old one screwed out and screwed this one in no problem, had this installed within 30 minutes and had hot water within a few hours.If you are not comfortable doing this yourself, I would call somebody. I am not a licensed plumber, but fortunately for me, my Dad was and I picked up some things along the way.
Shane
March 18, 2025
Water heater quit and was not old enough to replace.Tested the gas valve and it was not working properly, replaced with this new one that matched up perfectly and up and running again. Lot cheaper than replacing the entire thing.
Tim Taylor
November 18, 2024
Anytime you work with gas please be careful. Control box was perfect match and very easy to install. Took about 30 minutes to put on, even with going outside and turning the water off. I watched a couple of YouTube videos and used two crescent wrenches and a slot screwdriver. Working 3 days later no problem. I recommend replacing the lower burner, pilot and thermopile. I found it all on Amazon. Feels like I have a brand new water heater for $325 instead of $800. Very pleased!
MadJack
November 12, 2024
I also had the dreaded issue with the 4 blinking light code (High Temperature Shutdown). As others have noted, there appeared to be no way to reset the unit, so I ordered this replacement. While waiting for the replacement to show up, I did a search on YouTube and found there is a way to reset the unit. I followed the instructions from YouTube and the water heater fired back up and has been working since. I kept the new one because I feel sure the old one must be on it's way out and I want to have the replacement ready.Quick recap on how to reset. 1) Move the control to "off" and allow to sit for 10 minutes (allowing any gas to clear out before restarting). 2) Move the control to "Pilot" and while pressing in the control switch press the ignitor until the light start blinking (this is normal process for lighting the water heater). 3) Once the light is blinking, move the control to its hottest position, and wait 10 seconds (count from 1 to 10). 4) Now move the control back to "Hot" and count to 10. 5) Move the control back to "Pilot" and wait 10 seconds. 6) Move the control back to "Hot" and the water heater should light.As previously stated, check out the video on YouTube that demonstrates someone actually performing the procedure. I would strongly suggest you purchase a replace control valve so next time it fails you have a replacement unit and will not have to wait with no Hot Water.
Recommended Products
