Your cart is empty.
Your cart is empty.Gain increased horsepower and throttle response while protecting your engine from harmful particles and debris with Rough Country's Cold Air Intake System. This intake system moves the air filter away from the stuffy engine compartment so cooler air can be circulated into the engine for an increase in power. Cooler air is denser, and brings more oxygen into the combustion chamber to help your vehicle perform at its greatest potential. The cylindrical design and large diameter tube allow Rough Country's Cold Air Intake System to provide far better airflow than the factory air filter enclosed in a box. Each unit includes a premium, reusable air filter that's easy to clean for a long life of great performance. This easy to install device goes on in a snap for an instant increase in performance. Includes our industry leading Limited Lifetime warranty.
Justin
2025-08-22 12:31:42
Works great way better than paying for k&n and just as good
Curtis sparks
2025-08-16 11:29:55
Very easy installation the throttle response is great
Alec terry
2025-08-10 10:30:32
Would have left 5 stars if the kit wasn’t missing a tube, had better quality clamps and if the directions weren’t faded. I called their customer service about my missing tube and the clamp that broke when I was tightening it and they sent me another clamp and the tube I was missing and it took about 4 days to get delivered. It was annoying I had to take it all apart and put it together twice because of the missing tube but this kit is worth the money though, and I love how my truck sounds now and I already can see the gas mileage difference
MBC
2025-07-31 17:56:56
For late model trucks they don't include the right adapter for the breather hose. The breather hose on my 2017 is 5/8, all they give is a double barb. Worse still, the threaded bung isn't NPT. HAD TO BUY A 3/4NPT TO 5/8 RIGHT ANGLE HOSE BARB AND *RETHREAD* THE BUNG.Like others have said, instructions are about as clear as mud. I would gladly pay more for professionally printed instructions instead of the photo copied garbage.Next, not thrilled that it goes from a 6in filter to a 3in adapter, then through a 3in to 4in hose. Just stick with 4in for goodness sake! I bought a 6in to 4in adapter and a 4in "hump hose" to remove this restriction. (Although it goes back down to 3in at the stock throttle body).I also took this opportunity to install a 90mm throttle body, so I had to get a different 4x4 silicone elbow too. I also insulated the air box with foil, and I think that I'm going to close it up more to pull from the cold air adapter on the back of the headlight.It does sound a lot more aggressive 😉. WOT gives a pleasing roar as it climbs through the RPMs. I don't regret doing it, no change in MPG, just wish the kit had been tested more thoroughly and provided the right adapter for the breather hose.
derrik
2025-06-21 18:32:01
Do yourself a favor and buy a completely enclosed system. Directions are terrible and hard to see. Videos are not great on either. Bends are off on pipe, has a lot of pressure on rubber joints, clamps broke on me after adjusting boots. It comes with connectors for a rubber hose and the hose rips when you put it on the 90 degree elbow. The air sensor grommet is lose and will let some air in. Took me over two hours to install and again was not worth buying. This was like buying the cheapest kit you can find on eBay.
Daniel
2025-06-19 18:24:34
Quedo a la perfección en mi camioneta junto con el espaciador del acelerador
Adam W.
2025-06-16 14:46:44
I’m no mechanic but I am god with my hands. This product took a little bit of time to connect into my truck, and I did have to hit the auto store to buy a fitting to make it work, but overall it was an easy install for me and I love the sound it gives me. It feels like it has a little more power and it’s giving me a couple more miles per gallon at least.
Kungpao
2025-06-09 15:01:43
I don't know if it was just poor workmanship, but this was by far the worst install I've ever had to do for what is considered a bolt on mod. Parts needed to be bent to fit the right angles, clamps were too small and needed to be muscled on. Heck, one of the hose clamps were broken and I had to fix it. The rubber hose that has to attach to the factory breather barely fits on to the factory breather etc. Heck ikea furniture comes with hex keys, they couldn't be bothered to send one with the kit since they used hex screws? All in all, I expected better build quality. By the time I WANTED to give up, I was already too late and had made some cuts on factory parts so I was all in. Good thing I'm mechanically inclined. Once installed, it seems like it's working just fine. Sounds great, performance gains might take a while to see cause i've got my foot in it all the time to hear it.
Stephen LeBlanc
2025-06-05 14:36:16
Pretty straight forward install. Took longer then expected assembling the housing but pretty simple anyone can do it. I have an 2011 Ram and had to cut the included air hose a couple times to make it fit properly. I ended up using a elbow fitting(included) on the air hose as mine was kinking when attaching to the intake assembly pipe. Didn’t come with enough washers for me to be comfortable with the housing assembly so I used my own. I was happy with the quality and appearance. Nice throaty sound when stepping on the gas. There was a slight improvement in gas mileage which was nice. You will probably end up burning more gas because you just want to tramp on the pedal all the time to hear the nice rumbling sound from the intake. What I did notice considerably was the performance, the throttle response and horse power was a great improvement. Lots of get up and go
Kburton11
2025-05-28 11:16:02
Terrible fitment. Too many fasteners that loosen often. I couldn't find a replacement filter to swap out for cleaning. The best part was throwing it in the dumpster.Go S&B
Shawn. M
2025-05-19 18:50:01
Fits perfectly in my 2014, definitely better throttle response and louder on the highway and looks great even comes with extra brackets for older year dodges, only took about an hour of my time to install, great product
Christiaan Gotkowski
2025-02-08 21:42:05
You have to use the original intake tube with the 2023 Warlock which isn’t a bad thing at all.Extra parts from the kit but factory clamps can be reused.But the breather tube(small one), you have to buy a small filtered breather from K&N, just use the factory 90 and away you go.Do not over tighten.
Greig A.
2025-01-01 13:16:00
Cheap, sounds good. Installed ok, some of the couplers are a little short and the hose clamps as super low quality and the one for the filter doesn't full tighten. But it is half the price of other options. Not sure if I'd buy it again 50/50.
Recommended Products
