Your cart is empty.
Your cart is empty.Product Description
How to Use:
- Follow carefully the instructions given in the machine handbook.
- Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.
- Tighten only with the tool supplied with the machine.
- Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.
- Keep flanges and screw threads clean and free of burrs and rust.
Main Feature:
- Turbo segments design can sue on a wet or dry surface
- Optimized bond and formula for longer life
- Optimized segment height minimizes dust and debris
- Surface finishing on tile, concrete, screed, and natural stone
Widely Application:
- Suitable for dry or wet grinding of concrete, granite, stone, marble, tile, masonry and some other construction material to smooth uneven surfaces and remove flashing.
- High diamond concentration for long life and aggressive material removal. Large grinding segments with heat-treated steel bodies which provide increases durability and wheel life.
Daisey
September 2, 2025
I had to do some serious concrete removal, to do floor prep for tile on 2 separate areas that were previously separated by a wall during remodel. I had an old worn out one and wanted new to clean up the thin set from the removed tile. Great job cleaning the thin set. I had to grind down as much ad 1.5 inches in some spots.1/3 inch or less, I just used the grinding wheel. for the higher areas I made a level jig, and scored it with a 14" diamond blade and jack hammered some out. I'm not sure if that saved my time or not as the grinding wheel did very well. The score lines gave me a achieved depth indicator.I bought 2, as the price was right, but I'm not even close to wearing out the first, after "days" of grinding.it performed very well. It's definitely not a job for the feint of heart.The price was way better any any box store or harbor freight alternative. For minor leveling and cleaning up removed tile thin set residue this made short work of it. I tried a dust collector which was a waste of time. A helper with a light mist from a hose worked great keeping the dust down and did not make much of a mess.
Mark S.
August 25, 2025
Using this to clean up mortar from where the contractors built a cinder block wall too high. After knocking the block loose and removing it, this does a great job of getting rid of the extra mortar. Two words of advice though. When using it, try to position the wheel to "come off" an edge, not spinning where it could catch an edge. Second, do it on a breezy day, or wear a mask. The ground mortar will create a cloud that lingers around you, or at least use a cheap, junky fan. Can't comment on longevity yet, as I have only cleaned up about 20 feet of block, but even after that, the disc shows no wear.
Chris
August 7, 2025
Used this grinding wheel for multiple jobs and held up great
Rojo
July 16, 2025
Works great deffently order again I do epoxy floors
oglez
July 10, 2025
Affordable, light weight , works good for me.
Cristian
July 9, 2025
Had to removed. Bumps from the concrete for my laminate floor the. Grinder did a a great job removing bumps
Rick Montague
June 20, 2025
haven't used. but cheaper than in stores here for half the price.
Diane
June 19, 2025
I had to grind my entire concrete patio to fresh concrete in order to resurface it. Bought the Bauer 7" diamond grinder from Harbor freight for $40. It was worn out after about 20% (150 SF) of the 750 SF patio was done. Bought 4 of these thinking if they are only $25 each, they would not last as long as the HF version. I ground the rest of the patio (650 SF) with ONE of these, and it hardly looks worn down. If you need to grind concrete these are the bomb!
Daisey
June 16, 2025
I had to do some serious concrete removal, to do floor prep for tile on 2 separate areas that were previously separated by a wall during remodel. I had an old worn out one and wanted new to clean up the thin set from the removed tile. Great job cleaning the thin set. I had to grind down as much ad 1.5 inches in some spots.1/3 inch or less, I just used the grinding wheel. for the higher areas I made a level jig, and scored it with a 14" diamond blade and jack hammered some out. I'm not sure if that saved my time or not as the grinding wheel did very well. The score lines gave me a achieved depth indicator.I bought 2, as the price was right, but I'm not even close to wearing out the first, after "days" of grinding.it performed very well. It's definitely not a job for the feint of heart.The price was way better any any box store or harbor freight alternative. For minor leveling and cleaning up removed tile thin set residue this made short work of it. I tried a dust collector which was a waste of time. A helper with a light mist from a hose worked great keeping the dust down and did not make much of a mess.
Mark S.
June 12, 2025
Using this to clean up mortar from where the contractors built a cinder block wall too high. After knocking the block loose and removing it, this does a great job of getting rid of the extra mortar. Two words of advice though. When using it, try to position the wheel to "come off" an edge, not spinning where it could catch an edge. Second, do it on a breezy day, or wear a mask. The ground mortar will create a cloud that lingers around you, or at least use a cheap, junky fan. Can't comment on longevity yet, as I have only cleaned up about 20 feet of block, but even after that, the disc shows no wear.
Chris
June 4, 2025
Used this grinding wheel for multiple jobs and held up great
Rojo
March 22, 2025
Works great deffently order again I do epoxy floors
oglez
February 23, 2025
Affordable, light weight , works good for me.
Cristian
January 30, 2025
Had to removed. Bumps from the concrete for my laminate floor the. Grinder did a a great job removing bumps
Rick Montague
December 28, 2024
haven't used. but cheaper than in stores here for half the price.
Diane
December 24, 2024
I had to grind my entire concrete patio to fresh concrete in order to resurface it. Bought the Bauer 7" diamond grinder from Harbor freight for $40. It was worn out after about 20% (150 SF) of the 750 SF patio was done. Bought 4 of these thinking if they are only $25 each, they would not last as long as the HF version. I ground the rest of the patio (650 SF) with ONE of these, and it hardly looks worn down. If you need to grind concrete these are the bomb!
Recommended Products