Your cart is empty.
Your cart is empty.KM
2025-09-05 12:01:10
I was doing some large-ish resin work, and wanted to use a flame to pop bubbles. This seemed like it would be easier than using an acetylene torch, so I tried it. (The resin was kind of a pain, but this did work to pop a lot of the bubbles).It's a lot of plastic, and as anyone who's ever used a plastic lighter can tell you, if you keep it lit too long, it's likely gonna melt, but I was surprised, it didn't show any sign of a problem while I was using it. (I used fairly short, moving passes over the resin, so not on for a long time on each pass.)I did have trouble figuring out how to get the gas into it. and I'm sure glad I did it outside, because I lost quite a bit of gas before I got the hang of it. Fortunately, the gas vaporizes the instant it hits the air, so no pesky spills to clean up.For ease of use, this is the bomb, compared to Acetylene Torches. Easy to hold, easy to ignite, and way smaller to store in the cupboard. I have both, and trust me, this will be my go to torch for anything that doesn't require a long duration, or super hot flame. It's basically a glorified lighter, but it allows you to direct the flame a lot better. I like it.
B. Challenger
2025-08-23 16:57:05
Exactly what I hoped for.
Rolf Florexil
2025-08-07 17:31:13
There is no confusion with this torch, it's pretty simple and works well, a solid backup torch.
Chris
2025-05-25 17:00:37
Almost everything about this torch is great especially the price point. I have ordered many versions of this same torch and this is a nice one. The only difference from similar models is the candy red high quality paint job. It is used in a restaurant setting. Table side torch experiences are about impressing and this does that better than the black ones.We can get about 3-5 months out of the igniter. At the price point I don’t mind. It would probably last longer in another setting, but I’m not sure.It is not worth it to spend more on a lighter that claims to not have the same problem, they all do at various levels. 10-15$ for a torch with a gas gauge, a wide range of heat levels and a pull trigger rather than a thumb button is an amazing deal. The trigger is a huge deal if used over and over again. Your thumb will hurt pretty bad by the end of service with other ones, with a trigger you are fine. We never really use the hold flame button, but it works. In a busy restaurant things drop. They need to not stay on when they do lol.For completely different reasons (salamander maintenance) I have high heat testing equipment. We tested this torch against some ones claiming higher BTU and found almost no difference and this hits the quoted range. If you need it to hit the highest heat ranges you need premium fuel. We use simple camping stove fuel (also from Amazon, it’s a red can we buy in bulk). There is an attachment included that is pretty durable. It works with bigger cans like the ones we buy.Fuel is going to be much more expensive than torches and buying camping grade butane in bulk is saving me hundreds every few months. Refueling is easy, just follow directions. Empty with the red stick then fill in 3-5 second spurts with the flame intensity gauge at its lowest setting.Finally it is pretty drop resistant and sturdy. I have no fear of leaking or (god-forbid) gas related explosions. It is put together better than you would expect for the price point.I have not found any torch in the 20-100$ range that works better for our purposes. Some may last a little longer, but it’s better overall to just replace as needed rather than buy more expensive ones.
BASHA
2025-04-27 11:01:03
Great customer service and the seller provided a replacement one
Mountainman Dan
2025-04-11 10:31:42
The first torch I received did not work properly. Specifically the igniter would not spark and lite the torch. The torch would work if I used a separate ignition source but would not spark with the built-in lighter.I reached out to the vendor through Amazon Messaging and was immediately contacted by the selling vendor and sent a new replacement item. It arrived within a few days and works perfectly.I am familiar with the piezoelectric igniter systems and they are generally very reliable. But they are a mechanical component and a small percentage of failures do happen. A minor inconvenience, but the seller resolved the problem immediately.I used the torch the first day to sear some steaks. Worked perfectly. I really like the large flame area produced by the large shroud over the nozzle. It produces a hot and even flame.
Scott Taylor
2025-02-22 15:41:27
Living in the country comes with its own set of unique challenges, and one such challenge is the recurring need to burn leaves in the fall and dispose of limbs shed by trees during even the gentlest of breezes. However, I'm happy to share that I have discovered an exceptional solution to this problem—the efficient leaf-burning torch.This little torch has been a game-changer for me, and I can't recommend it enough to anyone facing similar challenges in their rural living experience. The torch's compact and user-friendly design makes it incredibly easy to ignite and manage fires.Compared to traditional matches, this torch provides a reliable and long-lasting flame that effortlessly ignites leaves and twigs, ensuring that even the most stubborn debris is burnt to ash. The torch's sturdy construction and high-quality materials also guarantee durability, which means it will be a faithful companion during the many falls.Not only does this torch make the process of burning leaves and disposing of tree limbs more manageable, but it also significantly reduces the time and effort required for these tasks. This has allowed me to enjoy the beautiful countryside while maintaining a clean and well-kept property.
Kelly L.
2025-02-12 18:35:22
I have only used it twice since getting it this month, but it works really well. The trigger is solid and ergonomical and the gas flame can be adjusted with an easy slider. I have made creme brulee and lemon meringue tarts and it makes quick work of both. Butane fills quickly and it didn't use up much for the two projects I used it on. Would recommend!
Olivier du 33
2025-02-04 15:18:42
Produit de qualité.
Ms74
2025-01-28 13:38:21
Ein wirklich richtig guter Brenner. Nett gemeinte Zubehör, denn der Entlüfter Dorn passt nicht und auch die Adapter auf irgendeine Kartusche. Aber das ist echt nicht wichtig - das teil ist gut, brennt gleichmäßig udn ist gut zu händeln.
Gerson Alcántar
2025-01-23 10:48:22
Fácil de usar y tiene una llama muy potente!!
B.atman
2025-01-22 12:56:42
Great little item works really well does the job for many use’s very happy with the torch easy to use instructions easy to read and clear.
Recommended Products