Your cart is empty.
Your cart is empty.SET OF TWO CONNECTORS and TWO CLAMPS: Muzzys 800-409HP Premium Stainless Steel Heater Core Connector with Clamp for 3/4" Inlets and Outlets and 5/8" Hoses. FITS: 1998-2014 Chevrolet Silverado/GMC Sierra 1500 2500 3500 Tahoe Suburban Cadillac Escalade Yukon Avalanche Express/Savana 2500 3500 4500 and many more vehicles.
Bre
2025-08-13 11:33:42
After about 100 miles on the truck, one popped off completely, leaving the clip and the oring attached to the truck and dumping half my coolant on the freeway. Replaced the one on the side of the freeway and 50 miles later, the second one started leaking.
the harsh truth
2025-08-09 12:26:19
Had replace the trashy plastic ones on my sons truck 3 times got these on before it got really cold kept him warm
Tfray22
2025-08-02 17:02:44
I wouldnt buy these ever again. They don't hold on on the heater core. When you push them onto the heater core then pull on it even slightly it will pull the inside clip and o-ring with out of it. The inside lip isn't big enough to retain the locking clip. They look nice but don't do the one thing you need them to do. The factory plastic ones hold 100 better better.
Ben Glantz
2025-07-27 12:58:43
First one lasted about a day of driving them blow off the second one lasted about a month and half.Not sure how much longer I'm going to be buying vehicle parts online
craig avery
2025-07-13 14:20:56
INSTALLED THESE ON MY 2002 CHEVY SILVERADO, FILLED THE RESERVOIR AND CHECKED TO MAKE SURE NO LEAKS. TOOK THE TRUCK OUT THE NEXT DAY WAS AROUND A HOUR FROM HOME AND STARTED SMELLING ANTIFREEZE. PULLED OVER, STEAM COMING FROM UNDER THE HOOD AND WHEN I CHECKED THE FITTINGS, THE ONE ON THE HEATER CORE OUTPUT LINE CAME OFF. THE CLIPS THAT HOLD IT ONTO THE HEATER CORE LINES SEPARATED FROM THE STAINLESS STEEL BODY AND OVER HEATED. GOT IT HOME, REMOVED THE FITTING AND CLIP AND HAD TO REPLACE IT WITH A PLASTIC FITTING ( LIKE OEM ) AND REFILL THE SYSTEM WITH 3 GALLONS OF ANTIFREEZE. TRIED TO REMOVE THE LINE GOING INTO THE HEATER CORE BUT COULDN'T GET IT OFF SO NOW I HAVE ONE PLASTIC AND ONE STAINLESS STEEL. THOUGHT I WOULD IMPROVE BY USING THE STAINLESS STEEL FITTINGS BUT ONLY COST ME MORE MONEY AND TIME. PLASTIC FITTINGS HAVE THE HOLDING CLIPS MOLDED IN WHERE THE STAINLESS STEEL FITTINGS HAVE CLIPS THE CAN BE REMOVED. DIDN'T THINK AT TIME TO TAKE PICS BECAUSE I WAS A LITTLE PEED OFF TO HAVE TO DO IT TWICE. HOPEFULLY THE OTHER FITTING WILL STAY ON. TIME WILL TELL.
brandon
2025-07-11 10:16:42
Don’t buy these .. absolute junk , blew right off as soon as it built pressure
Tong xiong
2025-07-07 10:22:53
Stainless steel, heater hose connector
Kenneth Taylor
2025-07-01 11:25:44
They did not fit I almost broke my heater core trying to force them to go on I wouldn't recommend these ..I wasted my money
Customer
2025-04-23 10:07:43
Didn’t fit well , leaked
mike c
2025-04-06 13:24:48
Nice quality item but very poor quality locking clips but seller was very easy to deal with
Bre
2025-03-22 17:41:26
After about 100 miles on the truck, one popped off completely, leaving the clip and the oring attached to the truck and dumping half my coolant on the freeway. Replaced the one on the side of the freeway and 50 miles later, the second one started leaking.
the harsh truth
2025-03-20 19:13:06
Had replace the trashy plastic ones on my sons truck 3 times got these on before it got really cold kept him warm
Tfray22
2025-02-18 12:31:10
I wouldnt buy these ever again. They don't hold on on the heater core. When you push them onto the heater core then pull on it even slightly it will pull the inside clip and o-ring with out of it. The inside lip isn't big enough to retain the locking clip. They look nice but don't do the one thing you need them to do. The factory plastic ones hold 100 better better.
Ben Glantz
2025-02-11 15:32:23
First one lasted about a day of driving them blow off the second one lasted about a month and half.Not sure how much longer I'm going to be buying vehicle parts online
craig avery
2025-02-09 13:01:29
INSTALLED THESE ON MY 2002 CHEVY SILVERADO, FILLED THE RESERVOIR AND CHECKED TO MAKE SURE NO LEAKS. TOOK THE TRUCK OUT THE NEXT DAY WAS AROUND A HOUR FROM HOME AND STARTED SMELLING ANTIFREEZE. PULLED OVER, STEAM COMING FROM UNDER THE HOOD AND WHEN I CHECKED THE FITTINGS, THE ONE ON THE HEATER CORE OUTPUT LINE CAME OFF. THE CLIPS THAT HOLD IT ONTO THE HEATER CORE LINES SEPARATED FROM THE STAINLESS STEEL BODY AND OVER HEATED. GOT IT HOME, REMOVED THE FITTING AND CLIP AND HAD TO REPLACE IT WITH A PLASTIC FITTING ( LIKE OEM ) AND REFILL THE SYSTEM WITH 3 GALLONS OF ANTIFREEZE. TRIED TO REMOVE THE LINE GOING INTO THE HEATER CORE BUT COULDN'T GET IT OFF SO NOW I HAVE ONE PLASTIC AND ONE STAINLESS STEEL. THOUGHT I WOULD IMPROVE BY USING THE STAINLESS STEEL FITTINGS BUT ONLY COST ME MORE MONEY AND TIME. PLASTIC FITTINGS HAVE THE HOLDING CLIPS MOLDED IN WHERE THE STAINLESS STEEL FITTINGS HAVE CLIPS THE CAN BE REMOVED. DIDN'T THINK AT TIME TO TAKE PICS BECAUSE I WAS A LITTLE PEED OFF TO HAVE TO DO IT TWICE. HOPEFULLY THE OTHER FITTING WILL STAY ON. TIME WILL TELL.
brandon
2025-02-08 11:24:46
Don’t buy these .. absolute junk , blew right off as soon as it built pressure
Tong xiong
2025-02-03 11:36:13
Stainless steel, heater hose connector
Kenneth Taylor
2025-01-11 13:46:12
They did not fit I almost broke my heater core trying to force them to go on I wouldn't recommend these ..I wasted my money
Customer
2024-12-31 16:04:44
Didn’t fit well , leaked
mike c
2024-12-10 18:03:10
Nice quality item but very poor quality locking clips but seller was very easy to deal with
Recommended Products
