Your cart is empty.
Your cart is empty.Brass Push Braided 3/4 Inch Water Softener Connector
Tyler Fullington
2025-09-05 21:20:25
This is the perfect part for integrating a water softener and/or iron filter into your existing 3/4" water system. It is easy to install, requiring no special tools or skills and very effective for it's purpose. The flexible lines make for great smooth flow, and there are no leaks when installed correctly. However, if you are building a new system or want something cleaner looking, I would recommend the "SharkBite UC529LFA 3/4x1 FNPT swivel adapter" also on amazon for $8 each. They require a crimp connection so they aren't for everyone, but if you are already overhauling your water piping and have or are planning on getting crimpers they are the perfect part for the job and not something you will find locally. That being said, I used these flexible hoses as an interim part of my setup and reused a set that came with my water softener and had zero issues, just wanted more flexibility and less torsional stress on the heads of my filtration equipment (these are heavy).P.S. Bonus is if you add equipment you can totally use a short piece of pipe and connect these SharkBite to SharkBite, I had this setup more over a month with no issues and see no reason it couldn't last as long as a typical SharkBite connection.
J-Deb
2025-08-27 12:11:48
I purchased two of these to connect a new, whole-house iron/sediment water filter (Terminox), which is similar in size to a water softener. My main water line is 3/4 inch copper. I was hesitant at first to purchase these because one of the reviewers I read stated he was a plumber and could not get these to fit properly on 3/4 inch copper pipe. I did not have a problem.Installation is simple, and to ensure a secure, proper fit, I always follow SharkBite's instructions. After making my cuts, I properly deburr the end (with a small deburring tool) and clean the exterior of the pipe for approximately 1 1/2 inches with emery paper. After wiping the pipe with a clean rag, I used a sharpie to make a mark at 1 1/4 inches from the end. After this I simply pushed the fitting onto the pipe until it stops. The mark is to ensure that the SharkBite fitting is all the way on the pipe and hasn't stopped short for some reason.I'm always leery of using SharkBite type fittings, and I would have preferred to use soldered connections, but for this application it was my best choice. I have to admit the two foot length make these versatile.
Bill Schuster
2025-08-26 12:24:42
worked well, connects easily no leaks !
Bob
2025-08-21 18:49:31
This easy to install hose will make a pro out of you. Perfect match to my water softener manifold and connected easily to my drippy supply pipes. It may be a bit pricy, and if you love to mumble four letter words under your breath as you try to solder drippy pipes, this may not be for you. BUT if you want to get the job done well and the first time, the price is worth it!
Molljacks19
2025-08-18 16:24:22
These connectors made installing a water softener a lot easier. I’m an average diyer and was quoted a few grand to install a water softener so I decided to do it myself. After some research, I was going to need some pex tubing but these connectors looked like they’d speed the process up and make most of the plumbing a lot easier. Overall that was true and the install went pretty good. It did take some effort to figure out exactly how to get these connected to the pex as there’s very little guidance but some online searches helped a lot.
Noah
2025-07-28 10:26:55
Very flexible, nice product.
Don
2025-05-08 15:56:27
Great quality !! Wouldn't hesitate buying again.
TomCat
2025-04-27 11:45:34
Threaded side seals securely with minimal tightening. Have been able to install and remove and reinstall multiple times without leakage. Much more flexible (bendable) than other brands. Easily removable compression side (If you use the SharkBite removal tool) .
John G
2025-04-26 15:47:56
Great solution. Made the water softener installation easier. Follow sharkbite instructions....
A fan of H.A, Rey
2025-04-19 18:10:11
The Sharkbite connector is a terrific improvement to household plumbing. Just push it onto the pipe and it's done. No mess. No fuss. No leaks.
Mike
2025-04-05 16:01:51
So very happy! I had trouble finding a way to change out my old softener for a new one without doing new plumbing. These flex pipes did the trick. I cut off the old and just stuck these on. No leaks and everything works great!
posted review
2025-02-09 20:29:52
Little pricey but we'll worth it.. exactly as described
John
2025-01-24 17:03:31
Easy install and saves time and money.
Recommended Products
$15.88
$ 6 .99 $6.99