Your cart is empty.
Your cart is empty.Product Description
Siemens ECLK2#4-2/0 Neutral Lug Kit
From the Manufacturer
Siemens Lug kit for installation on Siemens or Murray Load Center and meter combo neutral bars. Lug kit provides a wire range of #4 - 2/0. Check wiring diagram of panel for usage. The ECLK2 will work on any panel that calls for an LK2 as well.
Tyler
2025-09-02 17:47:45
Pretty simple piece and works as advertised
Wolfgang Unger
2025-08-15 16:28:34
I had real reservations about this item based upon some of the reviews that indicated that this was a knockoff (no stamped markings). That may have been at some time but my lug came in a Siemens bag with the the proper stampings required by the NEC (acceptable wire sizes and wire type classification pertaining to AL or CU wire usability). I had an old Gould/ITE panel in a relative's house that needed a sub-panel which required this lug to accept a 2 ga copper neutral wire. Siemen's purchased ITE many years ago and this lug fit like a charm. The attachment screw was strong and tightened well without stripping! With Amazon's generous return policy don't hesitate. This was the real Siemen's deal!
Sharon R
2025-07-12 16:52:24
Great lug kit comes with mounting screw which requires SAE Allen wrench.Note that when installed the neutral wire will be parallel to the bar not perpendicular due to the design of this particular lug kit.Depending on the orientation of the bar in the box and the length of the existing wire available this may or may not be problematic.Used it in a Siemens box feeding a sub panel. When Installed, it’s holes and resulting neutral wire position was perpendicular to existing neutral lug.Switched the position of the two lugs and since we had plenty of wire available it wasn’t an issue in our application . Just a heads up.
Ryan Burris
2025-05-25 10:33:13
Nice lug kit, I used it as a grounding lug on my sub panel. It fits on a standard bus bar and comes with the mounting screw which is much appreciated! I was using #2 AWG wire and it had no issues with it.The four stars is for the incorrect picture, the hole for the feed wire on the actual part is coming through the opposite two sides, so when mounted to your bus bar (which the little legs should straddle) the feed wire will come in perpendicular to the bus bar. I would have preferred that it come in as pictured, but I made do with the one that arrived because I was in a time crunch to get the project done. Otherwise, it works great!
Lou
2025-04-30 18:29:35
I needed to connect a 4 AWG wire into a Siemens neutral bar and needed the lug. Easy to install and fit perfectly.
steven oliver
2025-04-11 11:09:44
worked for what i needed it for
colby stellhorn
2025-03-24 12:52:17
Good quality
Customer
2025-03-20 12:05:55
Good fit in box. Need three empty slots together to install. You will need one of these if you are running wire to a sub panel. Accepts up to a 2 gauge wire.
alexandre
2025-02-19 14:06:07
This is not a OEM part. Its an aftermarket part and it doesn't have any CSA/UL marking on it.
Philbert Ang
2025-02-14 15:24:37
No puedo decir mucho sobre este accesorio de hardware para mi cuadro eléctrico Siemens pero es de buena calidad.
Recommended Products
