Your cart is empty.
Your cart is empty.Product Description
SMALLRIG Shotgun Microphone Holder (Cold Shoe) BSM2352 holds microphones with diameter from 19mm to 25mm. By adjusting the knob, it can grip microphones of different sizes firmly.
! ! ! Note
- If you prefer other mounting options, we have SMALLRIG Microphone Holder (NATO Clamp) BSM2351 and SMALLRIG Microphone Holder (15mm Rod Clamp) 1993
Key Features
- Firmly holds 19-25mm diameter microphones;
- Attached to standard cold shoe adapters;
- Built-in soft silicone to absorb bumps and noise;
- Compact and low-profile (70.9mm in height).
Compatibility
- Shotgun Microphones (19-25mm in diameter)
What You Get
- 1 x Microphone Holder
Robert
August 24, 2025
I’ve been the cheap plastic mic holders for awhile. With even the slightest bump, they either break or allow the mic to fly off the mount. This cold shoe mic mount it QUALITY and should be the last one I have to buy.The mount is made of aluminum, adjusts to fit different size mics, mounts to the camera securely (again with a metal ring), and is a matte black to blend in. It’s pricey, but looking back on how many plastic ones I’ve purchased over the years, I’ll save in the long run.The item comes nicely packaged is shipped quickly and returns are free. Small Rig has a variety of similar camera add ons and I recommend you check them out if you’re tired of cheap gear that breaks.
Richard A. Chaffee
August 17, 2025
I have been a big fan of Smallrig products, this mic holder did not disappoint, well made, held microphone nicely with a nice rubber lining. There is strength to hold the dead cat wind screen nicely. This product will also hold larger mics. Great product to add to my gadget box.
Paul Seidner
July 19, 2025
Love this thing! Bought a shotgun mic for my phone and it came with this cheap plastic holder that would bend under the weight of the mic and wind fury. This holder has no problem keeping my mic in place.
Micah Stroud
July 4, 2025
Another quality product from SmallRig. I got this to replace the in-the-box microphone shockmount from Deity for the D3 Pro shotgun microphone. Unlike the original mount, this one from SmallRig is compact, mostly metal (it has rubber isolation rings to dampen movement), and it fits into a cold shoe easily. This is a much more slimline setup than I had before which makes it easier to pack and travel with.I was worried that with only a single hold on the mic that this SmallRig mount might transfer more unwanted noises to the recording... but I have not found that to be the case. Everything works as before, with no bumps or wiggles of the camera making their way into the final audio mix. Just slide this thing into an open cold shoe, tighten down the ring, plug in the microphone cable and you are done.The only places I could see some improvement would be: make the clamp area a bit more narrow to avoid putting pressure on mic buttons located in the area, and adding a 1/4" - 20 screw option to the bottom of the cold shoe mount to allow for more mounting options.I'm glad I picked this SmallRig mic clamp up and it is now in my go-to bag for future recordings.
Sarah
June 28, 2025
I use this camera for self-filming hunts and needed a better solution to mounting my shotgun mic. I was using a Rode SM3-R mounted to the hot shoe on my camera, but it never seemed to stay tight, and the shock mounts ended up breaking halfway through the season. I actually ended up removing the cold shoe adapter from the SmallRig mic holder, reused the mounting bar for the Rode SM3-R, and mounted the SmallRig mic holder straight to the SM3-R bar. It sits nice and tight to the camera, the SM3-R bar pulls the mic back about 4 inches out of the camera view, and it all fits really snug now. Definitely recommend this mic holder as well as SmallRig accessories (I also use their fluid head)
Miguel Ramirez
June 3, 2025
The product wobbles and you have to put something in between the gap to keep it stable. The springs popped out and I lost a washer and could never put it fully together. It's too pricey to replace. Maybe better off buying a different one as its all pieced together.
Pennsylvania Sasquatch
May 31, 2025
Great product. Holds microphone securely and silently.
Jin
April 27, 2025
Same high build quality as everything else smallrig does, but it's heavy. So much so that when mounted sideways with a microphone, it bent a considerable amount. If mounting straight up, then it's not as bad, but I figured the point was to mount in different positions. It clamps the microphone well, and mine didn't move.The weight of a mic and the heavier metal build caused too much bending in the unit, and made it unusable for my application. It works well, but wasn't usable for my needs.
DAXX
March 11, 2025
I have a few shotgun mic’s and they all come with those red stands you see everywhere. They work, especially the new Helix style that Rode has implemented.But this SMALLRIG mic holder is both style and function. It’s a definite upgrade and hold all my different sized mic’s well, providing a good shock mount and much greater professional look when in use.Recommended.
カスタマー
February 25, 2025
ã—ã£ã‹ã‚Šã—ãŸé€ ã‚Šã§å®‰å¿ƒæ„ŸãŒã‚ã‚Šã¾ã™ã€‚シューã¨ãƒ›ãƒ«ãƒ€ãƒ¼ã®é–“ã®ï¼’点ã®ã‚´ãƒ ãŒã„ã‚ゆるå…éœ‡æ§‹é€ ã«ãªã£ã¦ã„ã¾ã™ã€‚NX5Rã«ã¯ãƒžã‚¤ã‚¯ãƒ›ãƒ«ãƒ€ãƒ¼ãŒå…ƒã€…付ã„ã¦ã„ã‚‹ãŒãƒ•ãƒãƒ³ãƒˆã‚·ãƒ¥ãƒ¼ã«ä»˜ã‘ã¦ã¿ãŸã€‚ç‹ãã¦æ¿€ã—ã„撮影ç¾å ´ã§ã¯ã€æ¨ªã¸å¼µã‚Šå‡ºã—ã¦ã„るマイクホルダーã§ã¯ãƒžã‚¤ã‚¯ãŒé‚ªé”ã«ãªã‚‹ã“ã¨ãŒã‚ã‚‹ã®ã§ãƒžã‚¤ã‚¯ã‚’レンズ上ã«æŒã£ã¦ããŸã‹ã£ãŸã€‚ç´”æ£ã®ä»˜å±žãƒžã‚¤ã‚¯ã§ã‚ã‚‹SONY ECM-XM1ã¯å•é¡Œãªã装ç€ã€‚若干高ã•ãŒä¸ŠãŒã‚‹ãŒè¨±å®¹ç¯„囲ã§ã—ã£ã‹ã‚Šã¨æ”¯ãˆã¦ã„ã¾ã™ã€‚å°‘ã—é•·ã•ã®ã‚ã‚‹SENNHEISER MKE600も垂れ下ãŒã‚‹ã“ã¨ãªã装ç€ã¯ã§ããŸã€‚ãŸã ã—ãƒãƒ³ãƒ‡ã‚£ã§ã‚«ãƒ¡ãƒ©ã‚’振るã¨ä¸Šä¸‹ã«è‹¥å¹²æºã‚Œã‚‹ã€‚マイクã®ä¸å¤®è¾ºã‚Šã‚’掴ã‚ã°ãƒãƒ©ãƒ³ã‚¹ãŒã„ã„ã ã‚ã†ã€‚画角ã«æ˜ り込むã“ã¨ã¯ãªã„ã®ã§ã¾ã‚ã“ã‚ŒãŒé™ç•Œã®é•·ã•ã‹ã€‚ã„ãšã‚Œã‚‚ã—ã£ã‹ã‚Šã¨ãƒžã‚¤ã‚¯ã‚’掴ã¿å¤–ã‚Œã¦è½ã¡ã‚‹ã‚ˆã†ãªã“ã¨ã¯ç„¡ã‹ã£ãŸã€‚シューã¸ã®å–り付ã‘ã‚‚ã—ã£ã‹ã‚Šã¨ç· ã‚è¾¼ã‚られã¾ã™ã€‚
Ahmed
December 31, 2024
But for heavier or longer shotgun mics it won't be good at all you will pick all noise
Adam G
December 24, 2024
it doesn't have enough strength to hold it without bending under the weight. you can't always put the mic on camera in a way that is evenly balanced, and this mic holder needs the mic to be perfectly balanced inside of it or it droops.
noripii
November 15, 2024
ミラーレスカメラã®å‹•ç”»æ’®å½±ç”¨ã«15ãŽã»ã©ã®ã‚¹ãƒ†ãƒ¬ã‚ªãƒžã‚¤ã‚¯ã‚’付ã‘られãªã„ã‹ã¨ã€æŽ¢ã—ã¾ãã£ã¦è¦‹ã¤ã‘ãŸå“ã§ã™ã€‚ä»–ã®æ–¹ã®ãƒ¬ãƒ“ューã§ã‚‚ã€ã€Œã‚¯ãƒƒã‚·ãƒ§ãƒ³æãŒæŸ”らã‹ã™ãŽã¦ãらã¤ãã€ã®è¡¨è¨˜ãŒæ°—ã«ãªã£ã¦ã„ã¾ã—ãŸãŒä½œã‚ŠãŒã—ã£ã‹ã‚Šã—ã¦ã„ãã†ãªã®ã§è³¼å…¥ã—ã¾ã—ãŸã€‚失敗ã§ã™ã€‚マイクãŒå‰ä¸‹ãŒã‚Šã«å‚¾ãã¶ã‚‰ã¶ã‚‰çŠ¶æ…‹ã§ã™ã€‚　値段ã«ç´å¾—ã®ã€ä¸‡åŠ›ã®ã‚ˆã†ã«ç· ã‚付ã‘ã‚‹ã€åŸºæœ¬æ€§èƒ½ã¯ã—ã£ã‹ã‚Šã—ã¦ã„ã‚‹ã®ã§ã€ãã®ã†ã¡ã‚¯ãƒƒã‚·ãƒ§ãƒ³éƒ¨ã‚’切りå–ã‚Šã€ã‚¢ã‚¯ãƒªãƒ«ç³»ã®å …ã„プラスãƒãƒƒã‚¯ã‹ãƒ©ãƒãƒ¼ã«æ›ãˆã¦ã€ä»–ã®ã‚«ãƒ¡ãƒ©ã‚¢ã‚¯ã‚»ã‚µãƒªãƒ¼ãªã©ã®å°ã¨ã—ã¦ä½¿ãˆãªã„ã‹ã¨è€ƒãˆä¸ã§ã™ã€‚改良ã•ã‚ŒãŸå“ãŒç™ºå£²ã•ã‚Œã‚‹ã¾ã§ã€è³¼å…¥ã¯æŽ§ãˆãŸæ–¹ãŒè‰¯ã„ã¨æ€ã„ã¾ã™ã€‚
Recommended Products
$29.00
$ 14 .99 $14.99
$99.00
$ 43 .99 $43.99